1 0 0 W S i n g l e O u t p u t M e d i c a l Ty p e
1 0 0 W S i n g l e O u t p u t M e d i c a l Ty p e
1 0 0 W S i n g l e O u t p u t M e d i c a l Ty p e
M S P - 1 0 0s e r i e s
M S P - 1 0 0s e r i e s
M S P - 1 0 0s e r i e s
SPECIFICATION
SPECIFICATION
SPECIFICATION
MODEL
MODEL
MODEL
DC VOLTAGE RATED CURRENT CURRENT RANGE
DC VOLTAGE RATED CURRENT CURRENT RANGE
DC VOLTAGE RATED CURRENT CURRENT RANGE
RATED POWER
RATED POWER
RATED POWER
Features :
Features :
Features :
Universal AC input / Full range
Universal AC input / Full range
Universal AC input / Full range
Built-in active PFCfunction
Built-in active PFCfunction
Built-in active PFCfunction
High efficiency, up to 90%
High efficiency, up to 90%
High efficiency, up to 90%
Withstand 300VAC surge input for 5 seconds
Withstand 300VAC surge input for 5 seconds
Withstand 300VAC surge input for 5 seconds
Protections: short circuit / Overload / Over voltage
Protections: short circuit / Overload / Over voltage
Protections: short circuit / Overload / Over voltage
Protections: Over temperature (optional)
Protections: Over temperature (optional)
Protections: Over temperature (optional)
Cooling by free air convection
Cooling by free air convection
Cooling by free air convection
1U low profile 38mm
1U low profile 38mm
1U low profile 38mm
Medical safetyapproved (MOOP level)
Medical safetyapproved (MOOP level)
Medical safetyapproved (MOOP level)
Built-in remote ON-OFF control
Built-in remote ON-OFF control
Built-in remote ON-OFF control
No load power consumption<0.5 W
No load power consumption<0.5 W
No load power consumption<0.5 W
All using 105 long life electrolyticcapacitors
All using 105 long life electrolyticcapacitors
All using 105 long life electrolyticcapacitors
5 years warranty
5 years warranty
5 years warranty
MSP-100-3.3 MSP-100-5 MSP-100-7.5 MSP-100-12MSP-100-15 MSP-100-24MSP-100-36MSP-100-48
MSP-100-3.3 MSP-100-5 MSP-100-7.5 MSP-100-12MSP-100-15 MSP-100-24MSP-100-36MSP-100-48
MSP-100-3.3 MSP-100-5 MSP-100-7.5 MSP-100-12MSP-100-15 MSP-100-24MSP-100-36MSP-100-48
3.3 V 5V 7.5 V 12V15V24V36V48V
3.3 V 5V 7.5 V 12V15V24V36V48V
3.3 V 5V 7.5 V 12V15V24V36V48V
20A 17A13.5A 8.5 A 7A 4.5 A 2.9 A 2.2 A
20A 17A13.5A 8.5 A 7A 4.5 A 2.9 A 2.2 A
20A 17A13.5A 8.5 A 7A 4.5 A 2.9 A 2.2 A
0 ~ 20A0 ~ 17A0 ~ 13.5 0 ~ 8.5 0 ~ 7A0 ~ 4.5 0 ~ 2.9 A 0 ~ 2.2
0 ~ 20A0 ~ 17A0 ~ 13.5 0 ~ 8.5 0 ~ 7A0 ~ 4.5 0 ~ 2.9 A 0 ~ 2.2
0 ~ 20A0 ~ 17A0 ~ 13.5 0 ~ 8.5 0 ~ 7A0 ~ 4.5 0 ~ 2.9 A 0 ~ 2.2
66W 85W 101.3W102W 105W 108W 104.4W105.6W
66W 85W 101.3W102W 105W 108W 104.4W105.6W
66W 85W 101.3W102W 105W 108W 104.4W105.6W
RIPPLE & NOISE (max.)Note.280mVp-p80mVp-p100mVp-p120mVp-p150mVp-p150mVp-p200mVp-p240mVp-p
RIPPLE & NOISE (max.)Note.280mVp-p80mVp-p100mVp-p120mVp-p150mVp-p150mVp-p200mVp-p240mVp-p
RIPPLE & NOISE (max.)Note.280mVp-p80mVp-p100mVp-p120mVp-p150mVp-p150mVp-p200mVp-p240mVp-p
OUTPUTVOLTAGE ADJ. RANGE of
OUTPUTVOLTAGE ADJ. RANGE of
OUTPUTVOLTAGE ADJ. RANGE of
3.1 ~ 3.8V4.75 ~ 5.8V7.1 ~ 9V 11.4 ~ 13.8V14.25 ~ 18V 22.8 ~ 28.8V34.2 ~ 39.6V45.6 ~ 55.2 V
3.1 ~ 3.8V4.75 ~ 5.8V7.1 ~ 9V 11.4 ~ 13.8V14.25 ~ 18V 22.8 ~ 28.8V34.2 ~ 39.6V45.6 ~ 55.2 V
3.1 ~ 3.8V4.75 ~ 5.8V7.1 ~ 9V 11.4 ~ 13.8V14.25 ~ 18V 22.8 ~ 28.8V34.2 ~ 39.6V45.6 ~ 55.2 V
VOLTAGE TOLERANCE Note.3 +2.5,-3.5% +2.5,-3.5% 2.5% 1.5% 1.5% 1.5% 1.5% 1.5%
VOLTAGE TOLERANCE Note.3 +2.5,-3.5% +2.5,-3.5% 2.5% 1.5% 1.5% 1.5% 1.5% 1.5%
VOLTAGE TOLERANCE Note.3 +2.5,-3.5% +2.5,-3.5% 2.5% 1.5% 1.5% 1.5% 1.5% 1.5%
LINE REGULATION LOAD REGULATION SETUP, RISE TIME
LINE REGULATION LOAD REGULATION SETUP, RISE TIME
LINE REGULATION LOAD REGULATION SETUP, RISE TIME
HOLD TIME (Typ.)
HOLD TIME (Typ.)
HOLD TIME (Typ.)
0.5% 0.5% 0.5% 0.3% 0.3% 0.2% 0.2% 0.2%
0.5% 0.5% 0.5% 0.3% 0.3% 0.2% 0.2% 0.2%
0.5% 0.5% 0.5% 0.3% 0.3% 0.2% 0.2% 0.2%
2.0% 2.0% 1.5% 0.8% 0.8% 0.5% 0.5% 0.5%
2.0% 2.0% 1.5% 0.8% 0.8% 0.5% 0.5% 0.5%
2.0% 2.0% 1.5% 0.8% 0.8% 0.5% 0.5% 0.5%
2500ms, 100ms/230VAC 2500ms, 100ms/115VAC at full load
2500ms, 100ms/230VAC 2500ms, 100ms/115VAC at full load
2500ms, 100ms/230VAC 2500ms, 100ms/115VAC at full load
50 ms /23 0VAC 20m s/115 VAC t fu ll load
50 ms /23 0VAC 20m s/115 VAC t fu ll load
50 ms /23 0VAC 20m s/115 VAC t fu ll load
VOLTAGE RANGENote.5 85 ~ 2 64VAC 12 0 ~ 370 VDC
VOLTAGE RANGENote.5 85 ~ 2 64VAC 12 0 ~ 370 VDC
VOLTAGE RANGENote.5 85 ~ 2 64VAC 12 0 ~ 370 VDC
FREQUENCY RANGE POWER FACTOR (Typ.)
FREQUENCY RANGE POWER FACTOR (Typ.)
FREQUENCY RANGE POWER FACTOR (Typ.)
47 ~ 6 3Hz
47 ~ 6 3Hz
47 ~ 6 3Hz
PF>0.9 5/2 30 VAC PF>0.9 8/115 VAC in ful l lo ad
PF>0.9 5/2 30 VAC PF>0.9 8/115 VAC in ful l lo ad
PF>0.9 5/2 30 VAC PF>0.9 8/115 VAC in ful l lo ad
INPUT
INPUT
INPUT
EFFICIENCY (Typ.) AC CURRENT (Typ.)
EFFICIENCY (Typ.) AC CURRENT (Typ.)
EFFICIENCY (Typ.) AC CURRENT (Typ.)
INRUSH CURRENT (Typ.)
INRUSH CURRENT (Typ.)
INRUSH CURRENT (Typ.)
78%83%
78%83%
78%83%
1.2 A/115VA C 0 .6A/2 30 VAC
1.2 A/115VA C 0 .6A/2 30 VAC
1.2 A/115VA C 0 .6A/2 30 VAC
35 A/11 5 V AC 65 A/230 VAC
35 A/11 5 V AC 65 A/230 VAC
35 A/11 5 V AC 65 A/230 VAC
84%87.5% 88%88.5%89%90%
84%87.5% 88%88.5%89%90%
84%87.5% 88%88.5%89%90%
The LEAKAGE CURRENTNote.6 Earth leakage current < 300A/264VAC , Touch leakage current < 100 a/264VAC
The LEAKAGE CURRENTNote.6 Earth leakage current < 300A/264VAC , Touch leakage current < 100 a/264VAC
The LEAKAGE CURRENTNote.6 Earth leakage current < 300A/264VAC , Touch leakage current < 100 a/264VAC
10 5 ~ 135 % ra ted ou tput po we r
10 5 ~ 135 % ra ted ou tput po we r
10 5 ~ 135 % ra ted ou tput po we r
The OVERHEAD of
The OVERHEAD of
The OVERHEAD of
P rote fiction type : Constant current lim iti ng for Vo=50 ~ 10 0% of the rated volta ge, rec ove rs auto matica lly after fa ult condition is rem oved
P rote fiction type : Constant current lim iti ng for Vo=50 ~ 10 0% of the rated volta ge, rec ove rs auto matica lly after fa ult condition is rem oved
P rote fiction type : Constant current lim iti ng for Vo=50 ~ 10 0% of the rated volta ge, rec ove rs auto matica lly after fa ult condition is rem oved
PROTECTION
PROTECTION
PROTECTIONOVER VOLTAGE
OVER VOLTAGE
OVER VOLTAGE
3.96 ~ V 4.62
3.96 ~ V 4.62
3.96 ~ V 4.62
6 ~ 7V9.4 ~ 10.9V14.4 ~ 16.8V18.8 ~ 21.8V30 ~ 34.8 V 41.4 ~ 48.6V57.6 ~ 67.2 V
6 ~ 7V9.4 ~ 10.9V14.4 ~ 16.8V18.8 ~ 21.8V30 ~ 34.8 V 41.4 ~ 48.6V57.6 ~ 67.2 V
6 ~ 7V9.4 ~ 10.9V14.4 ~ 16.8V18.8 ~ 21.8V30 ~ 34.8 V 41.4 ~ 48.6V57.6 ~ 67.2 V
THE ROLE OF ENVIRONMENT
THE ROLE OF ENVIRONMENT
FUNCTION ENVIRONMENTOVER TEMPERATURE REMOTE CONTROL WORKING TEMP. WORKING HUMIDITY
OVER TEMPERATURE REMOTE CONTROL WORKING TEMP. WORKING HUMIDITY
OVER TEMPERATURE REMOTE CONTROL WORKING TEMP. WORKING HUMIDITY
STORAGE TEMP., The MOISTURE
STORAGE TEMP., The MOISTURE
STORAGE TEMP., The MOISTURE
TEMP. COEFFICIENT VIBRATION
TEMP. COEFFICIENT VIBRATION
TEMP. COEFFICIENT VIBRATION
SAFETY STANDARDS
SAFETY STANDARDS
SAFETY STANDARDS
Prote cti on typ e : Shu t wn o/p vol tage , re-p ower to re co ver
Prote cti on typ e : Shu t wn o/p vol tage , re-p ower to re co ver
Prote cti on typ e : Shu t wn o/p vol tage , re-p ower to re co ver
Shu t down o/p vo ltag e, re co vers au tom atic al ly afte r tem pe ra ture to go is do wn
Shu t down o/p vo ltag e, re co vers au tom atic al ly afte r tem pe ra ture to go is do wn
Shu t down o/p vo ltag e, re co vers au tom atic al ly afte r tem pe ra ture to go is do wn
RC+/ RC- : 0 ~ 0.8 V= po wer o n ; 4 ~ 10V = po wer o ff
RC+/ RC- : 0 ~ 0.8 V= po wer o n ; 4 ~ 10V = po wer o ff
RC+/ RC- : 0 ~ 0.8 V= po wer o n ; 4 ~ 10V = po wer o ff
-40 ~ +60 (Re fer t o "ra ting Re e")
-40 ~ +60 (Re fer t o "ra ting Re e")
-40 ~ +60 (Re fer t o "ra ting Re e")
20 ~ 9 0% RH no n-co nde ns ing
20 ~ 9 0% RH no n-co nde ns ing
20 ~ 9 0% RH no n-co nde ns ing
-40 ~ +85, 10 ~ 95 % RH
-40 ~ +85, 10 ~ 95 % RH
-40 ~ +85, 10 ~ 95 % RH
0 .04 %/ (0 ~ 50)
0 .04 %/ (0 ~ 50)
0 .04 %/ (0 ~ 50)
10 ~ 5 00Hz , 5G 10 meters. /1cy cl e, 60m. ea ch alo ng X, y, Z ax is
10 ~ 5 00Hz , 5G 10 meters. /1cy cl e, 60m. ea ch alo ng X, y, Z ax is
10 ~ 5 00Hz , 5G 10 meters. /1cy cl e, 60m. ea ch alo ng X, y, Z ax is
ANSI/AAMI ES60601-1, IEC60601-1 approved
ANSI/AAMI ES60601-1, IEC60601-1 approved
ANSI/AAMI ES60601-1, IEC60601-1 approved
ISO LATI ON WILL SEE LPrim ary-Se co nda ry: 2MOOP, Prim aria-Ea rth: 1M object-oriented programming, Sec ond ary E-arth: 1M object-oriented programming
ISO LATI ON WILL SEE LPrim ary-Se co nda ry: 2MOOP, Prim aria-Ea rth: 1M object-oriented programming, Sec ond ary E-arth: 1M object-oriented programming
ISO LATI ON WILL SEE LPrim ary-Se co nda ry: 2MOOP, Prim aria-Ea rth: 1M object-oriented programming, Sec ond ary E-arth: 1M object-oriented programming
SECURITY and
SECURITY and
SECURITY and
EMC
EMC
EMC
(Note 4)
(Note 4)
(Note 4)OTHER
OTHER
OTHER
VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION
VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION
VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION
EMC IMMUNITY MTBF DIMENSION
EMC IMMUNITY MTBF DIMENSION
EMC IMMUNITY MTBF DIMENSION
PACKAGING
PACKAGING
PACKAGING
I/P-O/P:4KVACI/P-FG:2KVACO/P-FG:0.5 KVAC
I/P-O/P:4KVACI/P-FG:2KVACO/P-FG:0.5 KVAC
I/P-O/P:4KVACI/P-FG:2KVACO/P-FG:0.5 KVAC
I/P-O/P, I/P-FG, O/P-FG:1 00M Ohm s / 5 00VDC / 25/ 70% RH Com pli anc e of the EN5 5011 (CISPR11) Cl ass B, EN610 00 -3 -2,-3
I/P-O/P, I/P-FG, O/P-FG:1 00M Ohm s / 5 00VDC / 25/ 70% RH Com pli anc e of the EN5 5011 (CISPR11) Cl ass B, EN610 00 -3 -2,-3
I/P-O/P, I/P-FG, O/P-FG:1 00M Ohm s / 5 00VDC / 25/ 70% RH Com pli anc e of the EN5 5011 (CISPR11) Cl ass B, EN610 00 -3 -2,-3
Com pli anc e of the EN6 100 0-4-2, 3,4,5 ,6,8 ,11 , EN60 601 -1-2
Com pli anc e of the EN6 100 0-4-2, 3,4,5 ,6,8 ,11 , EN60 601 -1-2
Com pli anc e of the EN6 100 0-4-2, 3,4,5 ,6,8 ,11 , EN60 601 -1-2
29 5.7 K hrs min. MI L-HDBK-2 17 F (25)
29 5.7 K hrs min. MI L-HDBK-2 17 F (25)
29 5.7 K hrs min. MI L-HDBK-2 17 F (25)
15 9*97 *3 8mm (L *W*H)
15 9*97 *3 8mm (L *W*H)
15 9*97 *3 8mm (L *W*H)
0.38 Kg; 24pcs/10.1 Kg/0.76 CUFT
0.38 Kg; 24pcs/10.1 Kg/0.76 CUFT
0.38 Kg; 24pcs/10.1 Kg/0.76 CUFTNOTE
NOTE
NOTE
1. All parameters NOT specially mentioned are measured at 230vac input, ratedload and 25 of ambient temperature.
1. All parameters NOT specially mentioned are measured at 230vac input, ratedload and 25 of ambient temperature.
1. All parameters NOT specially mentioned are measured at 230vac input, ratedload and 25 of ambient temperature.
2. Ripple and noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor.
2. Ripple and noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor.
2. Ripple and noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (available in http://www.meanwell.com)
EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (available in http://www.meanwell.com)
EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (available in http://www.meanwell.com)
5. The reduction may be necessary underlow input voltages. Please checkthe of the curve of reduction of power for more details.
5. The reduction may be necessary underlow input voltages. Please checkthe of the curve of reduction of power for more details.
5. The reduction may be necessary underlow input voltages. Please checkthe of the curve of reduction of power for more details.
6. Touch currentwas measured from the main entrance to the DC output.
6. Touch currentwas measured from the main entrance to the DC output.
6. Touch currentwas measured from the main entrance to the DC output.
7. When the input voltage is less than 40VAC, the SPS may exhibit degradation of performance. The final productmanufacturers you must re-confirm this deviation that does not affect the basic safety or essential performance.
7. When the input voltage is less than 40VAC, the SPS may exhibit degradation of performance. The final productmanufacturers you must re-confirm this deviation that does not affect the basic safety or essential performance.
7. When the input voltage is less than 40VAC, the SPS may exhibit degradation of performance. The final productmanufacturers you must re-confirm this deviation that does not affect the basic safety or essential performance.
Fi file Name:MSP-100-SPEC2014-12-08
Fi file Name:MSP-100-SPEC2014-12-08
Fi file Name:MSP-100-SPEC2014-12-08