250W Single Output with the Function of PFC
250W Single Output with the Function of PFC
250W Single Output with the Function of PFC
Features :
Features :
Features :
HSP-250series
HSP-250series
HSP-250series Universal AC input / Full range
Universal AC input / Full range
Universal AC input / Full range
Built-in active PFC function,PF>0.95
Built-in active PFC function,PF>0.95
Built-in active PFC function,PF>0.95
High efficiencyup to 87%
High efficiencyup to 87%
High efficiencyup to 87%
Protections: short circuit / Overload / Over voltage / Over temperature
Protections: short circuit / Overload / Over voltage / Over temperature
Protections: short circuit / Overload / Over voltage / Over temperature
The forced air cooling built-in DC fan
The forced air cooling built-in DC fan
The forced air cooling built-in DC fan
1U low profile 41mm
1U low profile 41mm
1U low profile 41mm
Conformal coated
Conformal coated
Conformal coated
Built-in cooling fan ON-OFF control
Built-in cooling fan ON-OFF control
Built-in cooling fan ON-OFF control
Built-in remote sense function
Built-in remote sense function
Built-in remote sense function
3 years warranty
3 years warranty
3 years warranty
SPECIFICATION
SPECIFICATION
SPECIFICATION
MODEL
MODEL
MODEL
DC VOLTAGE RATED CURRENT RANGE RATED POWER
DC VOLTAGE RATED CURRENT RANGE RATED POWER
DC VOLTAGE RATED CURRENT RANGE RATED POWER
..
..
..
HSP-250-2.5 HSP-250-3.6 HSP-250-5
HSP-250-2.5 HSP-250-3.6 HSP-250-5
HSP-250-2.5 HSP-250-3.6 HSP-250-5
2.5 V 3.6 V 5V
2.5 V 3.6 V 5V
2.5 V 3.6 V 5V
50A50A50A
50A50A50A
50A50A50A
0 ~ 50A0 ~ 50A0 ~ 50A
0 ~ 50A0 ~ 50A0 ~ 50A
0 ~ 50A0 ~ 50A0 ~ 50A
125W 180W 250W
125W 180W 250W
125W 180W 250W
RIPPLE & NOISE (max.) Note.2100mVp-p100mVp-p100mVp-p
RIPPLE & NOISE (max.) Note.2100mVp-p100mVp-p100mVp-p
RIPPLE & NOISE (max.) Note.2100mVp-p100mVp-p100mVp-p
OUTPUT VOLTAGE ADJ. RANGE of
OUTPUT VOLTAGE ADJ. RANGE of
OUTPUT VOLTAGE ADJ. RANGE of
2.3 ~ 2.8V3.24 ~ 3.96V4.5 ~ 5.5 V
2.3 ~ 2.8V3.24 ~ 3.96V4.5 ~ 5.5 V
2.3 ~ 2.8V3.24 ~ 3.96V4.5 ~ 5.5 V
VOLTAGE TOLERANCE Note.32.0%2.0%2.0%
VOLTAGE TOLERANCE Note.32.0%2.0%2.0%
VOLTAGE TOLERANCE Note.32.0%2.0%2.0%
LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD TIME (Typ.)
LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD TIME (Typ.)
LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD TIME (Typ.)
0.5%0.5% 0.5%
0.5%0.5% 0.5%
0.5%0.5% 0.5%
1.0%1.0%1.0%
1.0%1.0%1.0%
1.0%1.0%1.0%
3000ms, 50ms/230VAC 3000ms, 50ms/115VAC at full load
3000ms, 50ms/230VAC 3000ms, 50ms/115VAC at full load
3000ms, 50ms/230VAC 3000ms, 50ms/115VAC at full load
16ms/230VAC16ms/115VAC at full load
16ms/230VAC16ms/115VAC at full load
16ms/230VAC16ms/115VAC at full load
VOLTAGE RANGE Note.5 85 ~ 264VAC120 ~ 370VDC
VOLTAGE RANGE Note.5 85 ~ 264VAC120 ~ 370VDC
VOLTAGE RANGE Note.5 85 ~ 264VAC120 ~ 370VDCINPUT
INPUT
INPUT
FREQUENCY RANGE POWER FACTOR (Typ.) EFFICIENCY (Typ.)
FREQUENCY RANGE POWER FACTOR (Typ.) EFFICIENCY (Typ.)
FREQUENCY RANGE POWER FACTOR (Typ.) EFFICIENCY (Typ.)
47 ~ 63Hz
47 ~ 63Hz
47 ~ 63Hz
PF>0.95/230VAC PF>0.98/115VAC at full load
PF>0.95/230VAC PF>0.98/115VAC at full load
PF>0.95/230VAC PF>0.98/115VAC at full load
79%83%
79%83%
79%83%87%
87%
87%
AC CURRENT (Typ.) INRUSH CURRENT (Typ.) THE LEAKAGE CURRENT
AC CURRENT (Typ.) INRUSH CURRENT (Typ.) THE LEAKAGE CURRENT
AC CURRENT (Typ.) INRUSH CURRENT (Typ.) THE LEAKAGE OF CURRENTOVERLOAD
The OVERHEAD of
The OVERHEAD of
1.5 A/115VAC0.75A/230VAC
1.5 A/115VAC0.75A/230VAC
1.5 A/115VAC0.75A/230VAC
35A/115VAC70A/230VAC
35A/115VAC70A/230VAC
35A/115VAC70A/230VAC
<0.6 mA / 240VAC
<0.6 mA / 240VAC
<0.6 mA / 240VAC
105 ~ 135% rated output power
105 ~ 135% rated output power
105 ~ 135% rated output power
2A/115VAC1A/230VAC
2A/115VAC1A/230VAC
2A/115VAC1A/230VAC
2.8/115VAC1.4A/230VAC
2.8/115VAC1.4A/230VAC
2.8/115VAC1.4A/230VAC
Protection type : Hiccup mode, recovers automatically after fault condition is removed
Protection type : Hiccup mode, recovers automatically after fault condition is removed
Protection type : Hiccup mode, recovers automatically after fault condition is removed
PROTECTION
PROTECTION
PROTECTIONOVER VOLTAGE
OVER VOLTAGE
OVER VOLTAGE
2.88 ~ 3.38 V
2.88 ~ 3.38 V
2.88 ~ 3.38 V
4.14 ~ 4.86V5.75 ~ 6.75 V
4.14 ~ 4.86V5.75 ~ 6.75 V
4.14 ~ 4.86V5.75 ~ 6.75 VOVER TEMPERATURE
THE EXCESS OF TEMPERATURE
THE EXCESS OF TEMPERATURE
Protection type : Shut down o/p voltage, re-power on to recover
Protection type : Shut down o/p voltage, re-power on to recover
Protection type : Shut down o/p voltage, re-power on to recover
Shut down o/p voltage, recovers automatically after temperature goes down
Shut down o/p voltage, recovers automatically after temperature goes down
Shut down o/p voltage, recovers automatically after temperature goes down
The CONTROL FUNCTION of the FAN RTH36010 Fan ; RTH34010 Fan off
The CONTROL FUNCTION of the FAN RTH36010 Fan ; RTH34010 Fan off
The CONTROL FUNCTION of the FAN RTH36010 Fan ; RTH34010 Fan off
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
SAFETY AND EMC
SAFETY AND EMC
SAFETY AND EMC
(Note 4)
(Note 4)
(Note 4)OTHER
OTHER
OTHER
WORKING TEMP. OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATION
WORKING TEMP. OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATION
WORKING TEMP. OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATION
SAFETY STANDARDS VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION
SAFETY STANDARDS VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION
SAFETY STANDARDS VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION
EMC IMMUNITY MTBF DIMENSION
EMC IMMUNITY MTBF DIMENSION
EMC IMMUNITY MTBF DIMENSION
PACKAGING
PACKAGING
PACKAGING
-40 ~ +70 (Refer to "Reduction Curve")
-40 ~ +70 (Refer to "Reduction Curve")
-40 ~ +70 (Refer to "Reduction Curve")
20 ~ 90% RH non-condensing
20 ~ 90% RH non-condensing
20 ~ 90% RH non-condensing
-40 ~ +85, 10 ~ 95% RH
-40 ~ +85, 10 ~ 95% RH
-40 ~ +85, 10 ~ 95% RH
0.03%/ (0 ~ 50)
0.03%/ (0 ~ 50)
0.03%/ (0 ~ 50)
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, y, Z axes
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, y, Z axes
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, y, Z axes
UL60950-1, TUV EN60950-1 approved
UL60950-1, TUV EN60950-1 approved
UL60950-1, TUV EN60950-1 approved
I/P-O/P:3KVAC I/P-FG:2KVACO/P-FG:0.5 KVAC
I/P-O/P:3KVAC I/P-FG:2KVACO/P-FG:0.5 KVAC
I/P-O/P:3KVAC I/P-FG:2KVACO/P-FG:0.5 KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2, heavy industry level, criteria
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2, heavy industry level, criteria
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2, heavy industry level, criteria
179.7 K hrs min.MIL-HDBK-217F (25)
179.7 K hrs min.MIL-HDBK-217F (25)
179.7 K hrs min.MIL-HDBK-217F (25)
199*105*41 mm (L*W*H)
199*105*41 mm (L*W*H)
199*105*41 mm (L*W*H)
0.97 Kg;16pcs/16.5 Kg/0.87 CUFT
0.97 Kg;16pcs/16.5 Kg/0.87 CUFT
0.97 Kg;16pcs/16.5 Kg/0.87 CUFTNOTE
NOTE
NOTE
1. All parameters NOT specially mentioned are measured at 230vac input, ratedload and 25 of ambient temperature.
1. All parameters NOT specially mentioned are measured at 230vac input, ratedload and 25 of ambient temperature.
1. All parameters NOT specially mentioned are measured at 230vac input, ratedload and 25 of ambient temperature.
2. Curly and noiseare measured at 20 mhz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor.
2. Curly and noiseare measured at 20 mhz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor.
2. Curly and noiseare measured at 20 mhz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives. For information on how to perform these EMC tests, please refer to EMI testingof component powersupplies.
EMC directives. For information on how to perform these EMC tests, please refer to EMI testingof component powersupplies.
EMC directives. For information on how to perform these EMC tests, please refer to EMI testingof component powersupplies.
(asavailable in http://www.meanwell.com)
(asavailable in http://www.meanwell.com)
(asavailable in http://www.meanwell.com)
5. Deratingmay be necessary underlow input voltages. Please checkthe of the curve of reduction of power for more details.
5. Deratingmay be necessary underlow input voltages. Please checkthe of the curve of reduction of power for more details.
5. Deratingmay be necessary underlow input voltages. Please checkthe of the curve of reduction of power for more details.
File name:HSP-250-SPEC2015-01-22
File name:HSP-250-SPEC2015-01-22
File name:HSP-250-SPEC2015-01-22