GS25U05-P1J MEANWELL AC-DC Wall mount adaptor, Output 5VDC / 4A, 2 pin USA plug

25W AC-DCIndustrialAdaptorGS25Useries 25W AC-DCIndustrialAdaptorGS25Useries
25W AC-DCIndustrialAdaptorGS25UseriesFeatures : Features :
Features : UniversalAC input / Full range UniversalAC input / Full range
UniversalAC input / Full range Do not load powerconsumptione0.aw Do not load powerconsumptione0.aw
Do not load powerconsumptione0.aw EnergyefficiencyLevelV EnergyefficiencyLevelV
EnergyefficiencyLevelV To comply with EISA 2007 and NRCan To comply with EISA 2007 and NRCan
To comply with EISA 2007 and NRCan 2 pole USA plug 2 pole USA plug
2 pole USA plug Class power(without earthpin) Class power(without earthpin)
Class power(without earthpin) Protections: short circuit / Overload / Over voltage Protections: short circuit / Overload / Over voltage
Protections: short circuit / Overload / Over voltage Pass LPS Pass LPS
Pass LPS Fully enclosed plastic case Fully enclosed plastic case
Fully enclosed plastic case LED indicator for power on LED indicator for power on
LED indicator for power on 2 years warranty 2 years warranty
2 years warranty SPECIFICATION SPECIFICATION
SPECIFICATION ORDER NO. ORDER NO.
ORDER NO. GS25U05-P1J GS25U07-P1J GS25U09-P1J GS25U12-P1J GS25U15-P1J GS25U18-P1J GS25U24-P1J GS25U28-P1J GS25U48-P1J GS25U05-P1J GS25U07-P1J GS25U09-P1J GS25U12-P1J GS25U15-P1J GS25U18-P1J GS25U24-P1J GS25U28-P1J GS25U48-P1J
GS25U05-P1J GS25U07-P1J GS25U09-P1J GS25U12-P1J GS25U15-P1J GS25U18-P1J GS25U24-P1J GS25U28-P1J GS25U48-P1J SECURITY MODEL NO. SECURITY MODEL NO.
SECURITY MODEL NO. GS25U05 GS25U05
GS25U05 GS25U07 GS25U07
GS25U07 GS25U09 GS25U09
GS25U09 GS25U12 GS25U12
GS25U12 GS25U15 GS25U15
GS25U15 GS25U18 GS25U18
GS25U18 GS25U24 GS25U24
GS25U24 GS25U28 GS25U28
GS25U28 GS25U48 GS25U48
GS25U48 DC VOLTAGENote.2 5V DC VOLTAGENote.2 5V
DC VOLTAGENote.2 5V 7.5V9V 7.5V9V
7.5V9V 12V 12V
12V 15V 15V
15V 18V 18V
18V 24V 24V
24V 28V 28V
28V 48V 48V
48VOUTPUT OUTPUT
OUTPUT RATED CURRENT CURRENT RANGE RATED POWER (max.) RATED CURRENT CURRENT RANGE RATED POWER (max.)
RATED CURRENT CURRENT RANGE RATED POWER (max.) 4.0A2.93A2.77A2.08A1.66A1.38A1.04A0.89A0.52A 4.0A2.93A2.77A2.08A1.66A1.38A1.04A0.89A0.52A
4.0A2.93A2.77A2.08A1.66A1.38A1.04A0.89A0.52A 0 ~ 4.0A0 ~ 2.93A0 ~ 2.77A0 ~ 2.08 0 ~ 1.66A0 ~ 1.38A0 ~ 1.04A0 ~ 0.89 0 ~ 0.52 A 0 ~ 4.0A0 ~ 2.93A0 ~ 2.77A0 ~ 2.08 0 ~ 1.66A0 ~ 1.38A0 ~ 1.04A0 ~ 0.89 0 ~ 0.52 A
0 ~ 4.0A0 ~ 2.93A0 ~ 2.77A0 ~ 2.08 0 ~ 1.66A0 ~ 1.38A0 ~ 1.04A0 ~ 0.89 0 ~ 0.52 A 20W22W25W25W25W25W25W25W25W 20W22W25W25W25W25W25W25W25W
20W22W25W25W25W25W25W25W25W RIPPLE & NOISE (max.) Note.3 50mVp-p 80mVp-p 80mVp-p 80mVp-p 100mVp-p 150mVp-p 180mVp-p 240mVp-p 240mVp-p RIPPLE & NOISE (max.) Note.3 50mVp-p 80mVp-p 80mVp-p 80mVp-p 100mVp-p 150mVp-p 180mVp-p 240mVp-p 240mVp-p
RIPPLE & NOISE (max.) Note.3 50mVp-p 80mVp-p 80mVp-p 80mVp-p 100mVp-p 150mVp-p 180mVp-p 240mVp-p 240mVp-p VOLTAGE TOLERANCE Note.4 5.0% 5.0% 5.0% 3.0% 3.0% 3.0% 2.0% 2.0% 2.0% LINE REGULATIONNote.5 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% LOAD REGULATIONNote.6 5.0% 5.0% 5.0% 3.0% 3.0% 3.0% 2.0% 2.0% 2.0% VOLTAGE TOLERANCE Note.4 5.0% 5.0% 5.0% 3.0% 3.0% 3.0% 2.0% 2.0% 2.0% LINE REGULATIONNote.5 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% LOAD REGULATIONNote.6 5.0% 5.0% 5.0% 3.0% 3.0% 3.0% 2.0% 2.0% 2.0%
VOLTAGE TOLERANCE Note.4 5.0% 5.0% 5.0% 3.0% 3.0% 3.0% 2.0% 2.0% 2.0% LINE REGULATIONNote.5 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% LOAD REGULATIONNote.6 5.0% 5.0% 5.0% 3.0% 3.0% 3.0% 2.0% 2.0% 2.0% INPUT INPUT
INPUTPROTECTION PROTECTION
PROTECTION ENVIRONMENT ENVIRONMENT
ENVIRONMENTSAFETY & EMC SAFETY AND EMC
SAFETY AND EMC (Note. 7) (Note. 7)
(Note. 7) OTHER CONNECTOR OTHER CONNECTOR
OTHER CONNECTOR The INSTALLATION program, PLACE, TIME VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.) The INSTALLATION program, PLACE, TIME VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.)
The INSTALLATION program, PLACE, TIME VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.) AC POWER AC POWER
AC POWER Input CURRENT (max.) The LEAKAGE CURRENT(max.) Input CURRENT (max.) The LEAKAGE CURRENT(max.)
Input CURRENT (max.) The LEAKAGE CURRENT(max.)The OVERHEAD of The OVERHEAD of
OVERLOADOVER VOLTAGE WORKING TEMP. OVER VOLTAGE WORKING TEMP.
OVER VOLTAGE WORKING TEMP. OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATION OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATION
OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION SAFETY STANDARDS VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION
SAFETY STANDARDS VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION MTBF DIMENSION PACKING PLUG MTBF DIMENSION PACKING PLUG
MTBF DIMENSION PACKING PLUG CABLE CABLE
CABLE 500ms, 20ms, 50ms/230VAC 500ms, 20ms, 15ms/115VACat full load 500ms, 20ms, 50ms/230VAC 500ms, 20ms, 15ms/115VACat full load
500ms, 20ms, 50ms/230VAC 500ms, 20ms, 15ms/115VACat full load 90 ~ 264VAC 135 ~ 370VDC 90 ~ 264VAC 135 ~ 370VDC
90 ~ 264VAC 135 ~ 370VDC 47 ~ 63Hz 47 ~ 63Hz
47 ~ 63Hz 78.5% 81.5% 82.5% 84.5% 84.5% 84.5% 85.5% 85.5% 87% 78.5% 81.5% 82.5% 84.5% 84.5% 84.5% 85.5% 85.5% 87%
78.5% 81.5% 82.5% 84.5% 84.5% 84.5% 85.5% 85.5% 87% 0.7 A / 100VAC 0.7 A / 100VAC
0.7 A / 100VAC 25A / 115VAC 25A / 115VAC
25A / 115VAC 0.25 mA / 240VAC 0.25 mA / 240VAC
0.25 mA / 240VAC 110 ~ 150%rated output power 110 ~ 150%rated output power
110 ~ 150%rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed Protection type : Hiccup mode, recovers automatically after fault condition is removed
Protection type : Hiccup mode, recovers automatically after fault condition is removed 105 ~ 135% rated output voltage 105 ~ 135% rated output voltage
105 ~ 135% rated output voltage Protection type : Clamp by zener diode Protection type : Clamp by zener diode
Protection type : Clamp by zener diode 0 ~ +50 (Refer to "Reduction Curve") 0 ~ +50 (Refer to "Reduction Curve")
0 ~ +50 (Refer to "Reduction Curve") 20% ~ 90% RH non-condensing 20% ~ 90% RH non-condensing
20% ~ 90% RH non-condensing -20 ~ +85, 10 ~ 95% RH -20 ~ +85, 10 ~ 95% RH
-20 ~ +85, 10 ~ 95% RH 0.03%/(0 ~ 40) 0.03%/(0 ~ 40)
0.03%/(0 ~ 40) 10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes 10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes
10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes UL60950-1,CSA C22.2, BSMI, CNS14336 approved UL60950-1,CSA C22.2, BSMI, CNS14336 approved
UL60950-1,CSA C22.2, BSMI, CNS14336 approved I/P-O/P:4242VDC FROM I/P-O/P:4242VDC FROM
I/P-O/P:4242VDC FROM I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH
I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH The compliance of the FCC PART 15 / CISPR22 class B, CNS13438 class B The compliance of the FCC PART 15 / CISPR22 class B, CNS13438 class B
The compliance of the FCC PART 15 / CISPR22 class B, CNS13438 class B 500Khrs min.MIL-HDBK-217F(25) 500Khrs min.MIL-HDBK-217F(25)
500Khrs min.MIL-HDBK-217F(25) 79*54*33mm (L*W*H) 79*54*33mm (L*W*H)
79*54*33mm (L*W*H) 210g ; 60pcs / 13.5 kg / CARTON 210g ; 60pcs / 13.5 kg / CARTON
210g ; 60pcs / 13.5 kg / CARTON See page 2; Other type available by customer requested See page 2; Other type available by customer requested
See page 2; Other type available by customer requested See page 2; Other type available by customer requested See page 2; Other type available by customer requested
See page 2; Other type available by customer requestedNOTE NOTE
NOTE 1.All parameters are specified at 115VAC input, rated load, 25 70% rh ambient. 1.All parameters are specified at 115VAC input, rated load, 25 70% rh ambient.
1.All parameters are specified at 115VAC input, rated load, 25 70% rh ambient. 2.DC voltage:The output of voltageset in the point measure by plug terminal & 50% load. 2.DC voltage:The output of voltageset in the point measure by plug terminal & 50% load.
2.DC voltage:The output of voltageset in the point measure by plug terminal & 50% load. a.Ripple and noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1 uf and capacitor of 47uf. a.Ripple and noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1 uf and capacitor of 47uf.
a.Ripple and noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1 uf and capacitor of 47uf. 4.Tolerance: includes set up tolerance, line regulation, load regulation. 4.Tolerance: includes set up tolerance, line regulation, load regulation.
4.Tolerance: includes set up tolerance, line regulation, load regulation. 5.Line regulation is measured from low line to high line at rated load. 5.Line regulation is measured from low line to high line at rated load.
5.Line regulation is measured from low line to high line at rated load. 6.Loadregulation is measured from 20% to 100% ratedload. 6.Loadregulation is measured from 20% to 100% ratedload.
6.Loadregulation is measured from 20% to 100% ratedload. 7.The power supply is considered as a separate unit, in the end, but the team still needs to re-confirm that the system complies with the 7.The power supply is considered as a separate unit, in the end, but the team still needs to re-confirm that the system complies with the
7.The power supply is considered as a separate unit, in the end, but the team still needs to re-confirm that the system complies with the EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies." EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies."
EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies." (asavailable in http://www.meanwell.com) (asavailable in http://www.meanwell.com)
(asavailable in http://www.meanwell.com) File name:GS25U-SPEC2015-05-20 File name:GS25U-SPEC2015-05-20
File name:GS25U-SPEC2015-05-20