GS18U28-P1J MEANWELL AC-DC Wall mount adaptor, Output 28VDC / 0.64A, Input USA plug

18W AC-DCIndustrialAdaptorGS18Useries 18W AC-DCIndustrialAdaptorGS18Useries
18W AC-DCIndustrialAdaptorGS18Useries Features : Features :
Features : UniversalAC input / Full range UniversalAC input / Full range
UniversalAC input / Full range Do not load powerconsumptione0.aw Do not load powerconsumptione0.aw
Do not load powerconsumptione0.aw EnergyefficiencyLevelV EnergyefficiencyLevelV
EnergyefficiencyLevelV To comply with EISA 2007 and NRCan To comply with EISA 2007 and NRCan
To comply with EISA 2007 and NRCan 2 pole USA plug 2 pole USA plug
2 pole USA plug Class power(without earthpin) Class power(without earthpin)
Class power(without earthpin) Protections: short circuit / Overload / Over voltage Protections: short circuit / Overload / Over voltage
Protections: short circuit / Overload / Over voltage Pass LPS Pass LPS
Pass LPS Fully enclosed plastic case Fully enclosed plastic case
Fully enclosed plastic case LED indicator for power on LED indicator for power on
LED indicator for power on 2 years warranty 2 years warranty
2 years warrantySPECIFICATION SPECIFICATION
SPECIFICATION ORDER NO. ORDER NO.
ORDER NO. SECURITY MODEL NO. SECURITY MODEL NO.
SECURITY MODEL NO. GS18U05-P1JGS18U07-P1JGS18U09-P1JGS18U12-P1JGS18U15-P1JGS18U18-P1JGS18U24-P1JGS18U28-P1JGS18U48-P1J GS18U05-P1JGS18U07-P1JGS18U09-P1JGS18U12-P1JGS18U15-P1JGS18U18-P1JGS18U24-P1JGS18U28-P1JGS18U48-P1J
GS18U05-P1JGS18U07-P1JGS18U09-P1JGS18U12-P1JGS18U15-P1JGS18U18-P1JGS18U24-P1JGS18U28-P1JGS18U48-P1J GS18U05GS18U07GS18U09GS18U12GS18U15GS18U18GS18U24GS18U28GS18U48 GS18U05GS18U07GS18U09GS18U12GS18U15GS18U18GS18U24GS18U28GS18U48
GS18U05GS18U07GS18U09GS18U12GS18U15GS18U18GS18U24GS18U28GS18U48 DC VOLTAGENote.25V 7.5V9V 12V 15V 18V 24V 28V 48V DC VOLTAGENote.25V 7.5V9V 12V 15V 18V 24V 28V 48V
DC VOLTAGENote.25V 7.5V9V 12V 15V 18V 24V 28V 48V RATED CURRENT RATED CURRENT
RATED CURRENT 3.0A2.0A2.0A1.50A1.20A1.0A0.75A0.64A0.375A 3.0A2.0A2.0A1.50A1.20A1.0A0.75A0.64A0.375A
3.0A2.0A2.0A1.50A1.20A1.0A0.75A0.64A0.375A CURRENT RANGE CURRENT RANGE
CURRENT RANGE 0 ~ 3.0A0 ~ 2.0A0 ~2.0 0 ~ 1.50 0 ~ 1.20A0 ~ 1.0A0 ~ 0.75 A 0 ~ 3.0A0 ~ 2.0A0 ~2.0 0 ~ 1.50 0 ~ 1.20A0 ~ 1.0A0 ~ 0.75 A
0 ~ 3.0A0 ~ 2.0A0 ~2.0 0 ~ 1.50 0 ~ 1.20A0 ~ 1.0A0 ~ 0.75 A 0 ~ 0.64 A 0 ~ 0.64 A
0 ~ 0.64 A 0 ~ 0.375 A 0 ~ 0.375 A
0 ~ 0.375 A RATED POWER (max.) RATED POWER (max.)
RATED POWER (max.) 15W15W18W18W18W18W18W18W 15W15W18W18W18W18W18W18W
15W15W18W18W18W18W18W18W 18W 18W
18W OUTPUT OUTPUT
OUTPUT RIPPLE & NOISE (max.) Note.350mVp-p 80mVp-p 80mVp-p 80mVp-p 100mVp-p 150mVp-p 180mVp-p 240mVp-p 240mVp-p VOLTAGE TOLERANCE Note.45.0% 5.0% 5.0% 3.0% 3.0% 3.0% 2.0% 2.0% 2.0% LINE REGULATIONNote.51.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% LOAD REGULATIONNote.65.0% 5.0% 5.0% 3.0% 3.0% 3.0% 2.0% 2.0% 2.0% RIPPLE & NOISE (max.) Note.350mVp-p 80mVp-p 80mVp-p 80mVp-p 100mVp-p 150mVp-p 180mVp-p 240mVp-p 240mVp-p VOLTAGE TOLERANCE Note.45.0% 5.0% 5.0% 3.0% 3.0% 3.0% 2.0% 2.0% 2.0% LINE REGULATIONNote.51.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% LOAD REGULATIONNote.65.0% 5.0% 5.0% 3.0% 3.0% 3.0% 2.0% 2.0% 2.0%
RIPPLE & NOISE (max.) Note.350mVp-p 80mVp-p 80mVp-p 80mVp-p 100mVp-p 150mVp-p 180mVp-p 240mVp-p 240mVp-p VOLTAGE TOLERANCE Note.45.0% 5.0% 5.0% 3.0% 3.0% 3.0% 2.0% 2.0% 2.0% LINE REGULATIONNote.51.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% LOAD REGULATIONNote.65.0% 5.0% 5.0% 3.0% 3.0% 3.0% 2.0% 2.0% 2.0% INPUT INPUT
INPUTPROTECTION PROTECTION
PROTECTION The INSTALLATION program, PLACE, TIME VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.) The INSTALLATION program, PLACE, TIME VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.)
The INSTALLATION program, PLACE, TIME VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.) AC POWER AC POWER
AC POWER Input CURRENT (max.) The LEAKAGE CURRENT(max.) Input CURRENT (max.) The LEAKAGE CURRENT(max.)
Input CURRENT (max.) The LEAKAGE CURRENT(max.)The OVERHEAD of The OVERHEAD of
OVERLOADOVER VOLTAGE WORKING TEMP. OVER VOLTAGE WORKING TEMP.
OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY WORKING HUMIDITY
WORKING HUMIDITY 500ms, 20ms, 50ms/230VAC 500ms, 20ms, 15ms/115VACat full load 500ms, 20ms, 50ms/230VAC 500ms, 20ms, 15ms/115VACat full load
500ms, 20ms, 50ms/230VAC 500ms, 20ms, 15ms/115VACat full load 90 ~ 264VAC 135 ~ 370VDC 90 ~ 264VAC 135 ~ 370VDC
90 ~ 264VAC 135 ~ 370VDC 47 ~ 63Hz 47 ~ 63Hz
47 ~ 63Hz 79.5% 82% 83% 85% 85% 85% 86% 86.5% 87% 79.5% 82% 83% 85% 85% 85% 86% 86.5% 87%
79.5% 82% 83% 85% 85% 85% 86% 86.5% 87% 0.5 A / 100VAC 0.5 A / 100VAC
0.5 A / 100VAC 25A / 115VAC 25A / 115VAC
25A / 115VAC 0.25 mA / 240VAC 0.25 mA / 240VAC
0.25 mA / 240VAC 110 ~ 150%rated output power 110 ~ 150%rated output power
110 ~ 150%rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed Protection type : Hiccup mode, recovers automatically after fault condition is removed
Protection type : Hiccup mode, recovers automatically after fault condition is removed 105 ~ 150% rated output voltage 105 ~ 150% rated output voltage
105 ~ 150% rated output voltage Protection type : Clamp by zener diode, output short Protection type : Clamp by zener diode, output short
Protection type : Clamp by zener diode, output short 0 ~ +50 (Refer to "Reduction Curve") 0 ~ +50 (Refer to "Reduction Curve")
0 ~ +50 (Refer to "Reduction Curve") 20% ~ 90% RH non-condensing 20% ~ 90% RH non-condensing
20% ~ 90% RH non-condensing ENVIRONMENTSTORAGE TEMP., THE HUMIDITY TEMP. COEFFICIENT VIBRATION ENVIRONMENTSTORAGE TEMP., THE HUMIDITY TEMP. COEFFICIENT VIBRATION
ENVIRONMENTSTORAGE TEMP., THE HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY STANDARDS
SAFETY STANDARDS -20 ~ +85, 10 ~ 95% RH -20 ~ +85, 10 ~ 95% RH
-20 ~ +85, 10 ~ 95% RH 0.03%/(0 ~ 40) 0.03%/(0 ~ 40)
0.03%/(0 ~ 40) 10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes 10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes
10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes UL60950-1,CSA C22.2, BSMI,CNS14336 approved UL60950-1,CSA C22.2, BSMI,CNS14336 approved
UL60950-1,CSA C22.2, BSMI,CNS14336 approved SECURITY and SECURITY and
SECURITY and EMC EMC
EMC (Note. 7) (Note. 7)
(Note. 7) OTHER CONNECTOR OTHER CONNECTOR
OTHER CONNECTOR VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION
VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION MTBF DIMENSION PACKING PLUG MTBF DIMENSION PACKING PLUG
MTBF DIMENSION PACKING PLUG CABLE CABLE
CABLE I/P-O/P:4242VDC FROM I/P-O/P:4242VDC FROM
I/P-O/P:4242VDC FROM I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH
I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH The compliance of the FCC PART 15 / CISPR22 class B, CNS13438 class B The compliance of the FCC PART 15 / CISPR22 class B, CNS13438 class B
The compliance of the FCC PART 15 / CISPR22 class B, CNS13438 class B 500Khrs min.MIL-HDBK-217F(25) 500Khrs min.MIL-HDBK-217F(25)
500Khrs min.MIL-HDBK-217F(25) 79*54*33mm (L*W*H) 79*54*33mm (L*W*H)
79*54*33mm (L*W*H) 210g ; 60pcs / 13.5 kg / CARTON 210g ; 60pcs / 13.5 kg / CARTON
210g ; 60pcs / 13.5 kg / CARTON See page 2; Other type available by customer requested See page 2; Other type available by customer requested
See page 2; Other type available by customer requested See page 2; Other type available by customer requested See page 2; Other type available by customer requested
See page 2; Other type available by customer requestedNOTE NOTE
NOTE 1.All parameters are specified at 115VAC input, rated load, 25 70% rh ambient. 1.All parameters are specified at 115VAC input, rated load, 25 70% rh ambient.
1.All parameters are specified at 115VAC input, rated load, 25 70% rh ambient. 2.DC voltage:The output of voltageset in the point measure by plug terminal & 50% load. 2.DC voltage:The output of voltageset in the point measure by plug terminal & 50% load.
2.DC voltage:The output of voltageset in the point measure by plug terminal & 50% load. a.Ripple and noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1 uf and capacitor of 47uf. a.Ripple and noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1 uf and capacitor of 47uf.
a.Ripple and noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1 uf and capacitor of 47uf. 4.Tolerance: includes set up tolerance, line regulation, load regulation. 4.Tolerance: includes set up tolerance, line regulation, load regulation.
4.Tolerance: includes set up tolerance, line regulation, load regulation. 5.Line regulation is measured from low line to high line at rated load. 5.Line regulation is measured from low line to high line at rated load.
5.Line regulation is measured from low line to high line at rated load. 6.Loadregulation is measured from 20% to 100% ratedload. 6.Loadregulation is measured from 20% to 100% ratedload.
6.Loadregulation is measured from 20% to 100% ratedload. 7.The power supply is considered as a separate unit, in the end, but the team still needs to re-confirm that the system complies with the 7.The power supply is considered as a separate unit, in the end, but the team still needs to re-confirm that the system complies with the
7.The power supply is considered as a separate unit, in the end, but the team still needs to re-confirm that the system complies with the EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies." EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies."
EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies." (asavailable in http://www.meanwell.com) (asavailable in http://www.meanwell.com)
(asavailable in http://www.meanwell.com)File Name:GS18U-SPEC2015-05-20 File name:GS18U-SPEC2015-05-20
File name:GS18U-SPEC2015-05-20