18W AC-DCIndustrialAdaptorGS18Useries
18W AC-DCIndustrialAdaptorGS18Useries
18W AC-DCIndustrialAdaptorGS18Useries
Features :
Features :
Features :
UniversalAC input / Full range
UniversalAC input / Full range
UniversalAC input / Full range
Do not load powerconsumptione0.aw
Do not load powerconsumptione0.aw
Do not load powerconsumptione0.aw
EnergyefficiencyLevelV
EnergyefficiencyLevelV
EnergyefficiencyLevelV
To comply with EISA 2007 and NRCan
To comply with EISA 2007 and NRCan
To comply with EISA 2007 and NRCan
2 pole USA plug
2 pole USA plug
2 pole USA plug
Class power(without earthpin)
Class power(without earthpin)
Class power(without earthpin)
Protections: short circuit / Overload / Over voltage
Protections: short circuit / Overload / Over voltage
Protections: short circuit / Overload / Over voltage
Pass LPS
Pass LPS
Pass LPS
Fully enclosed plastic case
Fully enclosed plastic case
Fully enclosed plastic case
LED indicator for power on
LED indicator for power on
LED indicator for power on
2 years warranty
2 years warranty
2 years warrantySPECIFICATION
SPECIFICATION
SPECIFICATION
ORDER NO.
ORDER NO.
ORDER NO.
SECURITY MODEL NO.
SECURITY MODEL NO.
SECURITY MODEL NO.
GS18U05-P1JGS18U07-P1JGS18U09-P1JGS18U12-P1JGS18U15-P1JGS18U18-P1JGS18U24-P1JGS18U28-P1JGS18U48-P1J
GS18U05-P1JGS18U07-P1JGS18U09-P1JGS18U12-P1JGS18U15-P1JGS18U18-P1JGS18U24-P1JGS18U28-P1JGS18U48-P1J
GS18U05-P1JGS18U07-P1JGS18U09-P1JGS18U12-P1JGS18U15-P1JGS18U18-P1JGS18U24-P1JGS18U28-P1JGS18U48-P1J
GS18U05GS18U07GS18U09GS18U12GS18U15GS18U18GS18U24GS18U28GS18U48
GS18U05GS18U07GS18U09GS18U12GS18U15GS18U18GS18U24GS18U28GS18U48
GS18U05GS18U07GS18U09GS18U12GS18U15GS18U18GS18U24GS18U28GS18U48
DC VOLTAGENote.25V 7.5V9V 12V 15V 18V 24V 28V 48V
DC VOLTAGENote.25V 7.5V9V 12V 15V 18V 24V 28V 48V
DC VOLTAGENote.25V 7.5V9V 12V 15V 18V 24V 28V 48V
RATED CURRENT
RATED CURRENT
RATED CURRENT
3.0A2.0A2.0A1.50A1.20A1.0A0.75A0.64A0.375A
3.0A2.0A2.0A1.50A1.20A1.0A0.75A0.64A0.375A
3.0A2.0A2.0A1.50A1.20A1.0A0.75A0.64A0.375A
CURRENT RANGE
CURRENT RANGE
CURRENT RANGE
0 ~ 3.0A0 ~ 2.0A0 ~2.0 0 ~ 1.50 0 ~ 1.20A0 ~ 1.0A0 ~ 0.75 A
0 ~ 3.0A0 ~ 2.0A0 ~2.0 0 ~ 1.50 0 ~ 1.20A0 ~ 1.0A0 ~ 0.75 A
0 ~ 3.0A0 ~ 2.0A0 ~2.0 0 ~ 1.50 0 ~ 1.20A0 ~ 1.0A0 ~ 0.75 A
0 ~ 0.64 A
0 ~ 0.64 A
0 ~ 0.64 A
0 ~ 0.375 A
0 ~ 0.375 A
0 ~ 0.375 A
RATED POWER (max.)
RATED POWER (max.)
RATED POWER (max.)
15W15W18W18W18W18W18W18W
15W15W18W18W18W18W18W18W
15W15W18W18W18W18W18W18W
18W
18W
18W
OUTPUT
OUTPUT
OUTPUT
RIPPLE & NOISE (max.) Note.350mVp-p 80mVp-p 80mVp-p 80mVp-p 100mVp-p 150mVp-p 180mVp-p 240mVp-p 240mVp-p VOLTAGE TOLERANCE Note.45.0% 5.0% 5.0% 3.0% 3.0% 3.0% 2.0% 2.0% 2.0% LINE REGULATIONNote.51.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% LOAD REGULATIONNote.65.0% 5.0% 5.0% 3.0% 3.0% 3.0% 2.0% 2.0% 2.0%
RIPPLE & NOISE (max.) Note.350mVp-p 80mVp-p 80mVp-p 80mVp-p 100mVp-p 150mVp-p 180mVp-p 240mVp-p 240mVp-p VOLTAGE TOLERANCE Note.45.0% 5.0% 5.0% 3.0% 3.0% 3.0% 2.0% 2.0% 2.0% LINE REGULATIONNote.51.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% LOAD REGULATIONNote.65.0% 5.0% 5.0% 3.0% 3.0% 3.0% 2.0% 2.0% 2.0%
RIPPLE & NOISE (max.) Note.350mVp-p 80mVp-p 80mVp-p 80mVp-p 100mVp-p 150mVp-p 180mVp-p 240mVp-p 240mVp-p VOLTAGE TOLERANCE Note.45.0% 5.0% 5.0% 3.0% 3.0% 3.0% 2.0% 2.0% 2.0% LINE REGULATIONNote.51.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% LOAD REGULATIONNote.65.0% 5.0% 5.0% 3.0% 3.0% 3.0% 2.0% 2.0% 2.0%
INPUT
INPUT
INPUTPROTECTION
PROTECTION
PROTECTION
The INSTALLATION program, PLACE, TIME VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.)
The INSTALLATION program, PLACE, TIME VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.)
The INSTALLATION program, PLACE, TIME VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.)
AC POWER
AC POWER
AC POWER
Input CURRENT (max.) The LEAKAGE CURRENT(max.)
Input CURRENT (max.) The LEAKAGE CURRENT(max.)
Input CURRENT (max.) The LEAKAGE CURRENT(max.)The OVERHEAD of
The OVERHEAD of
OVERLOADOVER VOLTAGE WORKING TEMP.
OVER VOLTAGE WORKING TEMP.
OVER VOLTAGE WORKING TEMP.
WORKING HUMIDITY
WORKING HUMIDITY
WORKING HUMIDITY
500ms, 20ms, 50ms/230VAC 500ms, 20ms, 15ms/115VACat full load
500ms, 20ms, 50ms/230VAC 500ms, 20ms, 15ms/115VACat full load
500ms, 20ms, 50ms/230VAC 500ms, 20ms, 15ms/115VACat full load
90 ~ 264VAC 135 ~ 370VDC
90 ~ 264VAC 135 ~ 370VDC
90 ~ 264VAC 135 ~ 370VDC
47 ~ 63Hz
47 ~ 63Hz
47 ~ 63Hz
79.5% 82% 83% 85% 85% 85% 86% 86.5% 87%
79.5% 82% 83% 85% 85% 85% 86% 86.5% 87%
79.5% 82% 83% 85% 85% 85% 86% 86.5% 87%
0.5 A / 100VAC
0.5 A / 100VAC
0.5 A / 100VAC
25A / 115VAC
25A / 115VAC
25A / 115VAC
0.25 mA / 240VAC
0.25 mA / 240VAC
0.25 mA / 240VAC
110 ~ 150%rated output power
110 ~ 150%rated output power
110 ~ 150%rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
Protection type : Hiccup mode, recovers automatically after fault condition is removed
Protection type : Hiccup mode, recovers automatically after fault condition is removed
105 ~ 150% rated output voltage
105 ~ 150% rated output voltage
105 ~ 150% rated output voltage
Protection type : Clamp by zener diode, output short
Protection type : Clamp by zener diode, output short
Protection type : Clamp by zener diode, output short
0 ~ +50 (Refer to "Reduction Curve")
0 ~ +50 (Refer to "Reduction Curve")
0 ~ +50 (Refer to "Reduction Curve")
20% ~ 90% RH non-condensing
20% ~ 90% RH non-condensing
20% ~ 90% RH non-condensing
ENVIRONMENTSTORAGE TEMP., THE HUMIDITY TEMP. COEFFICIENT VIBRATION
ENVIRONMENTSTORAGE TEMP., THE HUMIDITY TEMP. COEFFICIENT VIBRATION
ENVIRONMENTSTORAGE TEMP., THE HUMIDITY TEMP. COEFFICIENT VIBRATION
SAFETY STANDARDS
SAFETY STANDARDS
SAFETY STANDARDS
-20 ~ +85, 10 ~ 95% RH
-20 ~ +85, 10 ~ 95% RH
-20 ~ +85, 10 ~ 95% RH
0.03%/(0 ~ 40)
0.03%/(0 ~ 40)
0.03%/(0 ~ 40)
10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes
10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes
10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes
UL60950-1,CSA C22.2, BSMI,CNS14336 approved
UL60950-1,CSA C22.2, BSMI,CNS14336 approved
UL60950-1,CSA C22.2, BSMI,CNS14336 approved
SECURITY and
SECURITY and
SECURITY and
EMC
EMC
EMC
(Note. 7)
(Note. 7)
(Note. 7)
OTHER CONNECTOR
OTHER CONNECTOR
OTHER CONNECTOR
VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION
VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION
VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION
MTBF DIMENSION PACKING PLUG
MTBF DIMENSION PACKING PLUG
MTBF DIMENSION PACKING PLUG
CABLE
CABLE
CABLE
I/P-O/P:4242VDC FROM
I/P-O/P:4242VDC FROM
I/P-O/P:4242VDC FROM
I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH
I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH
I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH
The compliance of the FCC PART 15 / CISPR22 class B, CNS13438 class B
The compliance of the FCC PART 15 / CISPR22 class B, CNS13438 class B
The compliance of the FCC PART 15 / CISPR22 class B, CNS13438 class B
500Khrs min.MIL-HDBK-217F(25)
500Khrs min.MIL-HDBK-217F(25)
500Khrs min.MIL-HDBK-217F(25)
79*54*33mm (L*W*H)
79*54*33mm (L*W*H)
79*54*33mm (L*W*H)
210g ; 60pcs / 13.5 kg / CARTON
210g ; 60pcs / 13.5 kg / CARTON
210g ; 60pcs / 13.5 kg / CARTON
See page 2; Other type available by customer requested
See page 2; Other type available by customer requested
See page 2; Other type available by customer requested
See page 2; Other type available by customer requested
See page 2; Other type available by customer requested
See page 2; Other type available by customer requestedNOTE
NOTE
NOTE
1.All parameters are specified at 115VAC input, rated load, 25 70% rh ambient.
1.All parameters are specified at 115VAC input, rated load, 25 70% rh ambient.
1.All parameters are specified at 115VAC input, rated load, 25 70% rh ambient.
2.DC voltage:The output of voltageset in the point measure by plug terminal & 50% load.
2.DC voltage:The output of voltageset in the point measure by plug terminal & 50% load.
2.DC voltage:The output of voltageset in the point measure by plug terminal & 50% load.
a.Ripple and noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1 uf and capacitor of 47uf.
a.Ripple and noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1 uf and capacitor of 47uf.
a.Ripple and noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1 uf and capacitor of 47uf.
4.Tolerance: includes set up tolerance, line regulation, load regulation.
4.Tolerance: includes set up tolerance, line regulation, load regulation.
4.Tolerance: includes set up tolerance, line regulation, load regulation.
5.Line regulation is measured from low line to high line at rated load.
5.Line regulation is measured from low line to high line at rated load.
5.Line regulation is measured from low line to high line at rated load.
6.Loadregulation is measured from 20% to 100% ratedload.
6.Loadregulation is measured from 20% to 100% ratedload.
6.Loadregulation is measured from 20% to 100% ratedload.
7.The power supply is considered as a separate unit, in the end, but the team still needs to re-confirm that the system complies with the
7.The power supply is considered as a separate unit, in the end, but the team still needs to re-confirm that the system complies with the
7.The power supply is considered as a separate unit, in the end, but the team still needs to re-confirm that the system complies with the
EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies."
EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies."
EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies."
(asavailable in http://www.meanwell.com)
(asavailable in http://www.meanwell.com)
(asavailable in http://www.meanwell.com)File Name:GS18U-SPEC2015-05-20
File name:GS18U-SPEC2015-05-20
File name:GS18U-SPEC2015-05-20