GS15E-1P1J MEANWELL AC-DC Wall mount adaptor, Output 5VDC / 2.4A, 2 pin Euro plug

15W AC-DCIndustrialAdaptor GS15Eseries 15W AC-DCIndustrialAdaptor GS15Eseries
15W AC-DCIndustrialAdaptor GS15EseriesFeatures : Features :
Features : UniversalAC input / Full range UniversalAC input / Full range
UniversalAC input / Full range No load powerconsumption <0.075 W No load powerconsumption <0.075 W
No load powerconsumption <0.075 W The Energy Efficiency Level Of The Energy Efficiency Level Of
The Energy Efficiency Level Of To comply with the EU ErP and meetCoC version5 To comply with the EU ErP and meetCoC version5
To comply with the EU ErP and meetCoC version5 2 pole EURO plug 2 pole EURO plug
2 pole EURO plug Class II power(without earthpin) Class II power(without earthpin)
Class II power(without earthpin) Protections: short circuit / Overload / Over voltage Protections: short circuit / Overload / Over voltage
Protections: short circuit / Overload / Over voltage Pass LPS Pass LPS
Pass LPS Fully enclosed plastic case Fully enclosed plastic case
Fully enclosed plastic case 2 years warranty 2 years warranty
2 years warranty SPECIFICATION SPECIFICATION
SPECIFICATION ORDER NO. ORDER NO.
ORDER NO. SECURITY MODEL NO. SECURITY MODEL NO.
SECURITY MODEL NO. GS15E-1P1J GS15E-11P1J GS15E-2P1J GS15E-3P1J GS15E-4P1J GS15E-5P1J GS15E-6P1J GS15E-8P1J GS15E-1P1J GS15E-11P1J GS15E-2P1J GS15E-3P1J GS15E-4P1J GS15E-5P1J GS15E-6P1J GS15E-8P1J
GS15E-1P1J GS15E-11P1J GS15E-2P1J GS15E-3P1J GS15E-4P1J GS15E-5P1J GS15E-6P1J GS15E-8P1J GS15E-1GS15E-1-1GS15E-2GS15E-3GS15E-4GS15E-5GS15E-6GS15E-8 GS15E-1GS15E-1-1GS15E-2GS15E-3GS15E-4GS15E-5GS15E-6GS15E-8
GS15E-1GS15E-1-1GS15E-2GS15E-3GS15E-4GS15E-5GS15E-6GS15E-8 DC VOLTAGENote.25V 7.5 V, 9V 12V15V18V24V48V DC VOLTAGENote.25V 7.5 V, 9V 12V15V18V24V48V
DC VOLTAGENote.25V 7.5 V, 9V 12V15V18V24V48VOUTPUT OUTPUT
OUTPUT RATED CURRENT CURRENT RANGE RATED POWER RATED CURRENT CURRENT RANGE RATED POWER
RATED CURRENT CURRENT RANGE RATED POWER 2.40 A 1.60 A 1.66 A 1.25 A 1.00 A 0.83 A 0.625 A 0.31 A 2.40 A 1.60 A 1.66 A 1.25 A 1.00 A 0.83 A 0.625 A 0.31 A
2.40 A 1.60 A 1.66 A 1.25 A 1.00 A 0.83 A 0.625 A 0.31 A 0 ~ 2.40 0 ~ 1.60 0 ~1.66A0 ~ 1.25 0 ~ 1.00 0 ~ 0.83 0 ~ 0.625 0 ~ 0.31 A 0 ~ 2.40 0 ~ 1.60 0 ~1.66A0 ~ 1.25 0 ~ 1.00 0 ~ 0.83 0 ~ 0.625 0 ~ 0.31 A
0 ~ 2.40 0 ~ 1.60 0 ~1.66A0 ~ 1.25 0 ~ 1.00 0 ~ 0.83 0 ~ 0.625 0 ~ 0.31 A 12W 12W 15W 15W 15W 15W 15W 15W 12W 12W 15W 15W 15W 15W 15W 15W
12W 12W 15W 15W 15W 15W 15W 15W RIPPLE & NOISE (max.) Note.350mVp-p80mVp-p80mVp-p80mVp-p100mVp-p120mVp-p150mVp-p240mVp-p RIPPLE & NOISE (max.) Note.350mVp-p80mVp-p80mVp-p80mVp-p100mVp-p120mVp-p150mVp-p240mVp-p
RIPPLE & NOISE (max.) Note.350mVp-p80mVp-p80mVp-p80mVp-p100mVp-p120mVp-p150mVp-p240mVp-p VOLTAGE TOLERANCE Note.45.0% VOLTAGE TOLERANCE Note.45.0%
VOLTAGE TOLERANCE Note.45.0% 5.0% 5.0%
5.0% 5.0% 5.0%
5.0% 3.0% 3.0%
3.0% 3.0% 3.0%
3.0% 3.0% 3.0%
3.0% 2.0%2.0% 2.0%2.0%
2.0%2.0% LINE REGULATIONNote.5 0.5%0.5%0.5%0.5%0.5%0.5%0.5%0.5% LINE REGULATIONNote.5 0.5%0.5%0.5%0.5%0.5%0.5%0.5%0.5%
LINE REGULATIONNote.5 0.5%0.5%0.5%0.5%0.5%0.5%0.5%0.5% LOAD REGULATIONNote.6 5.0% LOAD REGULATIONNote.6 5.0%
LOAD REGULATIONNote.6 5.0% 5.0% 5.0%
5.0% 5.0% 5.0%
5.0% 3.0% 3.0%
3.0% 3.0% 3.0%
3.0% 3.0% 3.0%
3.0% 2.0% 2.0%
2.0% 2.0% 2.0%
2.0% INPUT INPUT
INPUTPROTECTION PROTECTION
PROTECTION ENVIRONMENT ENVIRONMENT
ENVIRONMENT SAFETY AND EMC SAFETY AND EMC
SAFETY AND EMC (Note. 7) (Note. 7)
(Note. 7)OTHER CONNECTOR OTHER CONNECTOR
OTHER CONNECTOR The INSTALLATION program, PLACE, TIME VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.) The INSTALLATION program, PLACE, TIME VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.)
The INSTALLATION program, PLACE, TIME VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.) AC POWER AC POWER
AC POWER Input CURRENT (max.) The LEAKAGE CURRENT(max.) Input CURRENT (max.) The LEAKAGE CURRENT(max.)
Input CURRENT (max.) The LEAKAGE CURRENT(max.)The OVERHEAD of The OVERHEAD of
OVERLOADOVER VOLTAGE WORKING TEMP. OVER VOLTAGE WORKING TEMP.
OVER VOLTAGE WORKING TEMP. OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATION OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATION
OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION SAFETY STANDARDS VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION
SAFETY STANDARDS VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY EMC IMMUNITY
EMC IMMUNITY MTBF DIMENSION PACKING PLUG MTBF DIMENSION PACKING PLUG
MTBF DIMENSION PACKING PLUG CABLE CABLE
CABLE 3000ms, 50ms, 16msat full load 3000ms, 50ms, 16msat full load
3000ms, 50ms, 16msat full load 90 ~ 264VAC 135 ~ 370VDC 90 ~ 264VAC 135 ~ 370VDC
90 ~ 264VAC 135 ~ 370VDC 47 ~ 63Hz 47 ~ 63Hz
47 ~ 63Hz 80%82.5%85%85%85%85%85.5%87% 80%82.5%85%85%85%85%85.5%87%
80%82.5%85%85%85%85%85.5%87% 0.5 A / 100VAC 0.5 A / 100VAC
0.5 A / 100VAC 50A / 230VAC 50A / 230VAC
50A / 230VAC 0.25 mA / 240VAC 0.25 mA / 240VAC
0.25 mA / 240VAC 105 ~ 250%rated output power 105 ~ 250%rated output power
105 ~ 250%rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed Protection type : Hiccup mode, recovers automatically after fault condition is removed
Protection type : Hiccup mode, recovers automatically after fault condition is removed >120% of the nominal output voltage >120% of the nominal output voltage
>120% of the nominal output voltage Protection type : Clamp by zener diode Protection type : Clamp by zener diode
Protection type : Clamp by zener diode 0 ~ +50 (Refer to "Reduction Curve") 0 ~ +50 (Refer to "Reduction Curve")
0 ~ +50 (Refer to "Reduction Curve") 20% ~ 90% RH non-condensing 20% ~ 90% RH non-condensing
20% ~ 90% RH non-condensing -20 ~ +85, 10 ~ 95% RH -20 ~ +85, 10 ~ 95% RH
-20 ~ +85, 10 ~ 95% RH 0.03%/(0 ~ 40) 0.03%/(0 ~ 40)
0.03%/(0 ~ 40) 10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes 10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes
10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes TUV EN60950-1 approved TUV EN60950-1 approved
TUV EN60950-1 approved I/P-O/P:3KVAC I/P-O/P:3KVAC
I/P-O/P:3KVAC I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH Compliance to EN55022 Class B, EN61000-3-2,3 I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH Compliance to EN55022 Class B, EN61000-3-2,3
I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH Compliance to EN55022 Class B, EN61000-3-2,3 Compliance to EN61000-4-2,3,4,5,6,11, light industry level, criteria A Compliance to EN61000-4-2,3,4,5,6,11, light industry level, criteria A
Compliance to EN61000-4-2,3,4,5,6,11, light industry level, criteria A 500Khrs min.MIL-HDBK-217F(25) 500Khrs min.MIL-HDBK-217F(25)
500Khrs min.MIL-HDBK-217F(25) 34*71*50mm (L*W*H) 34*71*50mm (L*W*H)
34*71*50mm (L*W*H) 180g ; 60pcs / 12kg / CARTON 180g ; 60pcs / 12kg / CARTON
180g ; 60pcs / 12kg / CARTON See page 2; Other type available by customer requested See page 2; Other type available by customer requested
See page 2; Other type available by customer requested See page 2; Other type available by customer requested See page 2; Other type available by customer requested
See page 2; Other type available by customer requested NOTE NOTE
NOTE 1.All parameters are specified at 230vac input, rated load, 25 70% rh ambient. 1.All parameters are specified at 230vac input, rated load, 25 70% rh ambient.
1.All parameters are specified at 230vac input, rated load, 25 70% rh ambient. 2.DC voltage:The output of voltageset in the point measure by plug terminal & 50% load. 2.DC voltage:The output of voltageset in the point measure by plug terminal & 50% load.
2.DC voltage:The output of voltageset in the point measure by plug terminal & 50% load. 3.Ripple and noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1 uf and capacitor of 47uf. 3.Ripple and noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1 uf and capacitor of 47uf.
3.Ripple and noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1 uf and capacitor of 47uf. 4.Tolerance: includes set up tolerance, line regulation, load regulation. 4.Tolerance: includes set up tolerance, line regulation, load regulation.
4.Tolerance: includes set up tolerance, line regulation, load regulation. 5.Line regulation is measured from low line to high line at rated load. 5.Line regulation is measured from low line to high line at rated load.
5.Line regulation is measured from low line to high line at rated load. 6.Loadregulation is measured from 0% to 100% ratedload. 6.Loadregulation is measured from 0% to 100% ratedload.
6.Loadregulation is measured from 0% to 100% ratedload. 7.The power supply is considered as a separate unit, in the end, but the team still needs to re-confirm that the system complies with the 7.The power supply is considered as a separate unit, in the end, but the team still needs to re-confirm that the system complies with the
7.The power supply is considered as a separate unit, in the end, but the team still needs to re-confirm that the system complies with the EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies." EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies."
EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies." (asavailable in http://www.meanwell.com) (asavailable in http://www.meanwell.com)
(asavailable in http://www.meanwell.com) File name:GS15E-SPEC2015-10-02 File name:GS15E-SPEC2015-10-02
File name:GS15E-SPEC2015-10-02