GS05U-USB MEANWELL AC-DC Wall mount adaptor, Output 5VDC / 1A, 2 pin USA plug, USB Output connector

5W AC-DCIndustrialAdaptor GS05U-USB 5W AC-DCIndustrialAdaptor GS05U-USB
5W AC-DCIndustrialAdaptor GS05U-USBFeatures : Features :
Features : UniversalAC input / Full range UniversalAC input / Full range
UniversalAC input / Full range 2 pole USA plug 2 pole USA plug
2 pole USA plug No load powerconsumption <0.075 W No load powerconsumption <0.075 W
No load powerconsumption <0.075 W The Energy Efficiency Level Of The Energy Efficiency Level Of
The Energy Efficiency Level Of To comply with EISA 2007/us DoE To comply with EISA 2007/us DoE
To comply with EISA 2007/us DoE Compact size Compact size
Compact size Class II power(without earthpin) Class II power(without earthpin)
Class II power(without earthpin) Protections: short circuit / Overload / Over voltage / Over temperature Protections: short circuit / Overload / Over voltage / Over temperature
Protections: short circuit / Overload / Over voltage / Over temperature Pass LPS Pass LPS
Pass LPS 100% full load burn-in test 100% full load burn-in test
100% full load burn-in test Fully enclosed plastic case Fully enclosed plastic case
Fully enclosed plastic case Low cost,high reliability Low cost,high reliability
Low cost,high reliability 2 years warranty 2 years warranty
2 years warrantySPECIFICATION SPECIFICATION
SPECIFICATION ORDER NO. ORDER NO.
ORDER NO. SECURITY MODEL NO. SECURITY MODEL NO.
SECURITY MODEL NO. GS05U-USB GS05U-USB
GS05U-USB GS05U GS05U
GS05U DC VOLTAGENote.25V DC VOLTAGENote.25V
DC VOLTAGENote.25VOUTPUT OUTPUT
OUTPUT RATED CURRENT CURRENT RANGE RATED POWER RATED CURRENT CURRENT RANGE RATED POWER
RATED CURRENT CURRENT RANGE RATED POWER 1.00 1.00
1.00 0 ~ 1.00 0 ~ 1.00
0 ~ 1.00 5W 5W
5W RIPPLE & NOISE (max.) Note.390mVp-p RIPPLE & NOISE (max.) Note.390mVp-p
RIPPLE & NOISE (max.) Note.390mVp-p VOLTAGE TOLERANCE Note.44.0% - LINE REGULATIONNote.51.0% of the LOAD REGULATIONNote.64.0% VOLTAGE TOLERANCE Note.44.0% - LINE REGULATIONNote.51.0% of the LOAD REGULATIONNote.64.0%
VOLTAGE TOLERANCE Note.44.0% - LINE REGULATIONNote.51.0% of the LOAD REGULATIONNote.64.0% INPUT INPUT
INPUTPROTECTION PROTECTION
PROTECTION The INSTALLATION program, PLACE, TIME VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.) The INSTALLATION program, PLACE, TIME VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.)
The INSTALLATION program, PLACE, TIME VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.) AC POWER AC POWER
AC POWER Input CURRENT (max.) The LEAKAGE CURRENT(max.) Input CURRENT (max.) The LEAKAGE CURRENT(max.)
Input CURRENT (max.) The LEAKAGE CURRENT(max.)The OVERHEAD of The OVERHEAD of
OVERLOADOVER VOLTAGE OVER VOLTAGE
MOST OF VOLTAGEOVER TEMPERATURE WORKING TEMP. THE OVER TEMPERATURE WORKING TEMP.
THE OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY WORKING HUMIDITY
WORKING HUMIDITY 1500ms, 20ms, 15msat full load 1500ms, 20ms, 15msat full load
1500ms, 20ms, 15msat full load 90 ~ 264VAC 127 ~ 370VDC 90 ~ 264VAC 127 ~ 370VDC
90 ~ 264VAC 127 ~ 370VDC 47 ~ 63Hz 47 ~ 63Hz
47 ~ 63Hz 74% 74%
74% 0.15 a / 100VAC 0.15 a / 100VAC
0.15 a / 100VAC 35A /230VAC 35A /230VAC
35A /230VAC 0.25 mA / 240VAC 0.25 mA / 240VAC
0.25 mA / 240VAC 105 ~ 135% rated output power 105 ~ 135% rated output power
105 ~ 135% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed Protection type : Hiccup mode, recovers automatically after fault condition is removed
Protection type : Hiccup mode, recovers automatically after fault condition is removed 105 ~ 160% rated output voltage, detect on main control IC 105 ~ 160% rated output voltage, detect on main control IC
105 ~ 160% rated output voltage, detect on main control IC Protection type : Hiccup mode, recovers automatically after fault condition is removed Protection type : Hiccup mode, recovers automatically after fault condition is removed
Protection type : Hiccup mode, recovers automatically after fault condition is removed Shut down o/p voltage, recovers automatically after temperature goes down Shut down o/p voltage, recovers automatically after temperature goes down
Shut down o/p voltage, recovers automatically after temperature goes down -20 ~ +50(Refer to "Reduction curve") -20 ~ +50(Refer to "Reduction curve")
-20 ~ +50(Refer to "Reduction curve") 20% ~ 90% RH non-condensing 20% ~ 90% RH non-condensing
20% ~ 90% RH non-condensing ENVIRONMENTSTORAGE TEMP., THE HUMIDITY TEMP. COEFFICIENT VIBRATION ENVIRONMENTSTORAGE TEMP., THE HUMIDITY TEMP. COEFFICIENT VIBRATION
ENVIRONMENTSTORAGE TEMP., THE HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY STANDARDS
SAFETY STANDARDS -20 ~ +85, 10 ~ 95% RH -20 ~ +85, 10 ~ 95% RH
-20 ~ +85, 10 ~ 95% RH 0.03%/(0 ~ 40) 0.03%/(0 ~ 40)
0.03%/(0 ~ 40) 10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes 10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes
10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes UL60950-1,CSA C22.2 approved UL60950-1,CSA C22.2 approved
UL60950-1,CSA C22.2 approved SECURITY and SECURITY and
SECURITY and EMC EMC
EMC (Note. 7) (Note. 7)
(Note. 7) OTHER OTHER
OTHER VOLTAGE RESISTANCE INSULATION RESISTANCE VOLTAGE RESISTANCE INSULATION RESISTANCE
VOLTAGE RESISTANCE INSULATION RESISTANCE EMI CONDUCTION AND RADIATION EMI CONDUCTION AND RADIATION
EMI CONDUCTION AND RADIATION MTBF DIMENSION MTBF DIMENSION
MTBF DIMENSION PACKAGING PACKAGING
PACKAGING I/P-O/P:4242VDC FROM I/P-O/P:4242VDC FROM
I/P-O/P:4242VDC FROM I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH Compliance FCC part 15 Class B I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH Compliance FCC part 15 Class B
I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH Compliance FCC part 15 Class B 1100Khrs min.MIL-HDBK-217F(25) 1100Khrs min.MIL-HDBK-217F(25)
1100Khrs min.MIL-HDBK-217F(25) 41.86*32.76*23.8 mm (L*W*H) 41.86*32.76*23.8 mm (L*W*H)
41.86*32.76*23.8 mm (L*W*H) 26g ; 102pcs / 5 kg / CARTON 26g ; 102pcs / 5 kg / CARTON
26g ; 102pcs / 5 kg / CARTON USB CONNECTOR Type a USB CONNECTOR Type a
USB CONNECTOR Type a NOTE NOTE
NOTE 1.All parameters are specified at 115VAC input, rated load, 25 70% rh ambient. 1.All parameters are specified at 115VAC input, rated load, 25 70% rh ambient.
1.All parameters are specified at 115VAC input, rated load, 25 70% rh ambient. 2.DC voltage:The output of voltageset in the point measure by plug terminal & 50% load. 2.DC voltage:The output of voltageset in the point measure by plug terminal & 50% load.
2.DC voltage:The output of voltageset in the point measure by plug terminal & 50% load. 3.Ripple and noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1 uf and capacitor of 47uf. 3.Ripple and noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1 uf and capacitor of 47uf.
3.Ripple and noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1 uf and capacitor of 47uf. 4.Tolerance: includes set up tolerance, line regulation, load regulation. 4.Tolerance: includes set up tolerance, line regulation, load regulation.
4.Tolerance: includes set up tolerance, line regulation, load regulation. 5.Line regulation is measured from low line to high line at rated load. 5.Line regulation is measured from low line to high line at rated load.
5.Line regulation is measured from low line to high line at rated load. 6.Loadregulation is measured from 0% to 100% ratedload 6.Loadregulation is measured from 0% to 100% ratedload
6.Loadregulation is measured from 0% to 100% ratedload 7.The power supply is considered as a separate unit, in the end, but the team still needs to re-confirm that the system complies with the 7.The power supply is considered as a separate unit, in the end, but the team still needs to re-confirm that the system complies with the
7.The power supply is considered as a separate unit, in the end, but the team still needs to re-confirm that the system complies with the EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies." EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies."
EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies." (asavailable in http://www.meanwell.com) (asavailable in http://www.meanwell.com)
(asavailable in http://www.meanwell.com)File Name:GS05U-USB-SPEC2015-09-15 File name:GS05U-USB-SPEC2015-09-15
File name:GS05U-USB-SPEC2015-09-15