LFS Columns - OBO BETTERMANN

Service pole floor, 130x80x676, Pure white, 9010, Aluminium, Alu

Distribution column ISSDHSM45RW, floor 675x80x130 Aluminum, Alu,

Distribution column, type ISSDHSM45. ISS distribution column made of aluminum with 45 mm opening for direct mounting of Modul 45 switching and connection equipment. Column consists of: 1 double-sided column with support foot total length: 675 mm 2 aluminum covers length: 675 mm The design of this distribution column is based on an oval and extremely slender aluminum profile that features on both sides a cover from the channel series Rapid 45 mechanism holder. The 45 mm opening is suitable for the direct housing of the Modul 45® switching and connection devices. The mounting space is theoretically sufficient for 2 x 14 Modul 45® devices. If more space is required for the Modul 45connect® or cabling, the maximum number of devices is reduced. A partition wall type 2371/40 (6023096) can be i

Service pole floor, 70x670, Pure white, 9010, Aluminium, Alu

Service pole, type ISSRHSM45. ISS aluminium service pole with a 45 mm system opening. Set consisting of:1 one-compartment pole with stand Total length: 675 mm1 aluminium cover Length: 675 mmThe design of this ISS service pole is based on an extremely slender, round aluminium profile, which has a smooth cover of the Rapid 45 device installation trunking series on the front side. The 45 mm system opening is suitable for direct acceptance of Modul 45® switching and connection devices. The installation compartment is theoretically sufficient for 14 Modul 45® devices. If Modul 45connect® is used or in the case of cabling requiring a lot of space, the number of the max. installable devices is reduced. There is the option of installing a partition, type 2371/40 (6023096).

Wall cover closed, 125x2, Pure white, 9010, Steel, St

Ceiling panel for ISSRM45. Closed ceiling rosette for tidy closure of the ceiling gland of the service poles, type ISSRM45.

Ceiling panel for ISSDM45, 185x135x2, Pure white, 9010, Steel, St

Ceiling panel for ISSDM45. Ceiling rosette for tidy closure of the pole penetration, type ISSDM45, in the ceiling.

Cover piece for ISS98 and ISS133, 110x110x22mm, Pure white, 9010, Steel, St

Cover screen. Cover screen to laminate the ceiling plate cut-out in the gland area of the ISS70110ST service pole.

Service pole floor/ceiling, 64x145x3000, Anodised, Aluminium, Alu

Service pole, type ISST70140. ISS twin aluminium service pole with a 76.5 mm system opening.Set consists of:1 single-compartment column with clamping attachment Total length: 3,315–3,480 mm1 single-compartment pole with clamping device1 trunking installation profile Length 1,000 mm1 aluminium cover Length: 1,000 mmThe area for device installation is suitable for accepting front-locking accessory mounting boxes of the series 71GD...The following accessories can be used, depending on the mounting situation.

Service pole floor/ceiling, 70x110x3000, Anodised, Aluminium, Alu

Distribution column ISS70110EL, floor/ceiling 3000x110x70 Aluminum, Alu, anodized

Electrical installation column, type ISS70110. ISS aluminum distribution column with 76.5 mm opening. Set consisting of: 1 single-sided column with fastening system total length: 3315 mm - 3480 mm1 ceiling fixing with fastening system1 channel mounting profile length: 3,000 mm1 aluminum cover length 3,000 mmThe distribution column is suitable for housing front locking mechanisms of the 71GD series... A partition wall, type GA-TW70 (6279711) and a top clamp, type KL80A (6288640) can be installed as an option. The following accessories can be used depending on the installation conditions.

Service pole floor/ceiling, 140x110x3000, Anodised, Aluminium, Alu

Service pole, type ISS140110. ISS aluminium service pole with a 76.5 mm system opening.Set consists of:1 two-compartment pole with clamping fastening Total length 3,315‒3,480 mm1 ceiling fastening with clamping device2 aluminium covers Length: 3,000 mmThe service pole is suitable for accepting front-locking accessory mounting boxesof the series 71GD... The installation of a partition of type GA-TW70 (6279711) and the installation of the cover clip, type KL80A (6288640), are possible as an option.The following accessories can be used, depending on the mounting situation.

Service pole floor/ceiling, 80x130x3300, Anodised, Aluminium, Alu

Distribution column ISSDM45EL, floor/ceiling 3000x80x130 Aluminum, Alu, anodized

Service pole for lighting, 64x145x3000, Pure white, 9010, Aluminium, Alu

Distribution column ISST70140BRW for lighting 3000x146x65 pure white Aluminum, Alu

Service pole, type ISST70140B. ISS twin aluminium service pole with a 76.5 mm system opening.Set consists of:1 single-compartment pole with clamping fastening Total length: 3,315–3,480 mm1 fastening option for lighting1 ceiling fastening with clamping device1 device installation profile Length: 1,000 mm1 aluminium cover Length: 1,000 mm1 ISSBP70140 floor plateThe area for device installation is suitable to accept front-locking device installation sockets of the 71GD... series. The panel to fasten luminaires is attached at a height of 1,850 mm and its own height is 148 mm. It is possible to create various kinds of workplace or general room lighting using the standard wall brackets from lighting manufacturers.The following accessories can be used, depending on the mounting situation.

Service pole floor, 140x133x250, Pure white, 9010, Aluminium, Alu

Service pole, type ISSHS140250. ISS aluminium service pole, 2-compartment, with a 76.5 mm system opening.Empty, equippable with standard devices (socket, telephone, etc.), max. 4 devices.Fixing possible directly on floor. Accessory mounting boxes to be ordered separately.The service pole is suitable for accepting front-locking accessory mounting boxes of the series 71GD.... The installation of a partition of type GA-TW (6279711) and the installation of the cover clip, type KL80A, are possible as an option.

Service pole floor, 140x133x500, Pure white, 9010, Aluminium, Alu

Distribution column ISSHS140500RW, floor 500x130x140 Aluminum, Alu,

Electrical installation column, type ISSHS140500. 2-sided ISS distribution column, made of aluminium with 76.5 mm system opening. Empty, equippable with max. 8 common mechanisms (electrical outlets, telephone, etc.)It can be fixed directly to the ground. Mechanism boxes must be ordered separately. The distribution column can be equipped with the 71GD series mechanism trays... A type GA-TW (6279711) partition wall and a type KL80A clamp can be installed as an option.

Service pole floor, 140x133x675, Pure white, 9010, Aluminium, Alu

Service pole, type ISSHS140700. ISS aluminium service pole, 2-compartment, with a 76.5 mm system opening.Empty, equippable with standard devices (socket, telephone, etc.), max. 10 devices.Direct fastening on floor possible. Accessory mounting boxes to be ordered separately.The service pole is suitable for accepting front locking accessory mounting boxes of theseries 71GD.... The installation of a partition of type GA-TW (6279711) and the installation of the cover clip, type KL80A, are possible as an option.

Service post centre , 220x250x564, Anodised, Aluminium, Alu

ISSHS6EL distribution column, 564x290x260 Aluminum, Alu, anodized

Electrical installation column, type ISSHS6. ISS Distribution column centre Empty, they can be equipped on all 4 sides with common mechanisms (power sockets, telephone, etc.). 2 sides of the center of the installation can be equipped on two sides, the other two - on one side. Up to 5 mechanisms can be installed on each lid, up to a total of 30. Direct fixing to the ground. Mechanism boxes must be ordered separately. The distribution column can be equipped with the 71GD series gearboxes... A type GA-TW (6279711) partition wall and a type KL80A clamp can be installed as an option.

Service pole floor, 70x670, Anodised, Aluminium, Alu

Service pole, type ISSRHSM45. ISS aluminium service pole with a 45 mm system opening. Set consisting of:1 one-compartment pole with stand Total length: 675 mm1 aluminium cover Length: 675 mmThe design of this ISS service pole is based on an extremely slender, round aluminium profile, which has a smooth cover of the Rapid 45 device installation trunking series on the front side. The 45 mm system opening is suitable for direct acceptance of Modul 45® switching and connection devices. The installation compartment is theoretically sufficient for 14 Modul 45® devices. If Modul 45connect® is used or in the case of cabling requiring a lot of space, the number of the max. installable devices is reduced. There is the option of installing a partition, type 2371/40 (6023096).

Floor plate , White aluminium, 9006, Strip galvanised/powder-coated, DIN EN 10147, Steel, St

Base plate ISSBP70110WA, 170x130x3 Steel, St, strip galvanized / plastic coated, DIN EN 10346

Floor plate for ISS70110. Floor plate with 30 mm visible edge and four fastening holes Ø 8.5 mm. The floor plate is suitable for installation on the service poles of type ISS70110.

Floor plate , White aluminium, 9006, Strip galvanised/powder-coated, DIN EN 10147, Steel, St

Base plate ISSBP70140WA, 205x124x3 Steel, St, strip galvanized / plastic coated, DIN EN 10346

Base plate 70140. Base plate with visible edge of 30 mm and 4 fixing holes of Ø 8.5 mm. The base plate is suitable for the assembly of electrical installation columns of type ISST70140, ISSOG70140 and ISST70140B.

Floor plate , 200x170x3mm, White aluminium, 9006, Strip galvanised/powder-coated, DIN EN 10147, Steel, St

Floor plate for ISS140110. Floor plate with 30 mm visible edge and four fastening holes Ø 8.5 mm. The floor plate is suitable for installation on the service poles of type ISS140110.

Rubber support , Black, Rubber, GUM

Rubber support for 70140. Rubber support for slip-free fixing of the floor-ceiling service pole. The rubber support is suitable for mounting service poles of types ISST70140, ISSOG70140 and ISST70140B.

Adjustable floor feet for installation columns F, D350x8mm, Pure white, 9010, Steel, St

Stand. Floor plate as stand for service poles with hose to ceiling, type ISS110100F, ISS140100F, ISSRM45F and ISSDM45F.

Hose connection for installation columns F, 146x66x60mm, Galvanised, Steel, St

classic spacer SAISSF, for distribution columns F 100x50x80mm Steel, St, zinc plated

Ceiling fixing. Hose connection as ceiling fixing for distribution columns with type ISS110100F, ISS140100F, ISSRM45F and ISSDM45F ceiling hose.

Wall cover , 140x110mm, Pure white, 9010, Aluminium, Alu

Ceiling panel for ISS140110. Ceiling rosette for tidy closure of the pole penetration in the ceiling. Suitable for service pole, type ISS140110.

Ceiling panel for 2 hoses, 140x100x40, Pure white, 9010, Steel, St

DAB-2F ceiling panel for 2 flexible tubes 140x100x40 pure white Steel, St

Ceiling panel ISSDM45F. Ceiling rosette for tidy closure of the penetration of the flexible hoses in the ceiling.

Cover for falling flat angle, desk, 80x300mm, Pure white, 9010, Steel, St

Sheet steel flat angle cover, falling. Cover for closing flat angles.

Spacer for floor plate, L 85mm, Anodised, Aluminium, Alu