28153 LEGRAND LARGE LOAD BOX 8000N

DMX³ open circuit breakers enable overhead protection and control of low-voltage installations from 630 to 6300 A. DMX³-I open circuit breakers enable load cutting and isolation of low-voltage circuits from 1000 to 6300 A. These power protection devices are available in fixed or removable versions and can be equipped with interlocking mechanisms for power inverters. They can be supplemented with current-type auxiliaries, motorized controls, interlocks, front or rear terminals, spreaders. The electronic protection units allow precise adjustments of the protection parameters and must be ordered at the same time as the DMX³ for factory installation. The DMX³ 1600 has a complete version pre-equipped with a protection unit. DMX³ can become a communicator as an option for monitoring.

Device construction	Sliding technology for integrated device
Integrated ground fault protection	No
Main Current Circuit Connection Type	Screw connection
Suitable for DIN rail mounting	No
Optional DIN rail mounting	No
With alarm activated	No
With integrated low-voltage release	No
Number of poles	3
Connection position for the main voltage circuit	Behind
Complete device with protective device	No
Integrated motorized drive	No
Optional motorized drive	No
Protection Class (IP)	IP20
Width	282 mm
Height	352 mm

Depth	297 mm
Impact resistance	Not applicable
Operating Temperature (Min-Max)	-5-70 °C
Storage Temperature (Min-Max)	-25-85 °C
Type of voltage	AC
Frequency (Min-Max)	50-60 Hz
Direction of the electricity supply	From above
Display of markings on the connection terminals	No
Colour	Grey
Halogen-free	Yes
Terminal Capacity (Min-Max)	120-1000 mm²
Connection Cable Type	Flexible or rigid
Label Space/Print Area	No
Contains battery and/or accumulator	No