028487 LEGRAND DMX³6300 MPX10 100KA S 4P6300A

DMX³ open-frame switches enable protection and control at the inlet of low-voltage installations from 630A to 6300A. DMX³-I Load Cut Disconnectors allow low-voltage circuits from 1000A to 6300A to be cut and sectioned under load. These power protection devices are available in a fixed or sectional version and can be equipped with interlocking mechanisms for mains inverters. They can be complemented with auxiliaries such as trigger coils, motorized controls, locks, front or rear sockets, separators. The electronic protection units allow precise adjustments of the protection parameters and must be ordered at the same time as the DMX³ for factory installation. The DMX³ 1600 has a complete version pre-equipped with a protection unit. The protection units can be adjusted directly on the display or in combination with a Bluetooth dongle, the parameters can be adjusted via an app.

Permanent nominal current Iu	5000 A
Nominal Voltage (Min-Max)	0-690 V
Rated short-circuit current at the cut-off current Icu at 50 Hz 400 V	100 kA
Current Overload Release Setting (Min-Max)	1000-5000 A
Short-Term Short-Circuit Delayed Release (Min-Max) Adjustment Range	1500-50000 A
Short Circuit Instant Release (Min-Max) adjustment range	10000-75000 A
Device construction	Sliding technology for integrated device
Main Current Circuit Connection Type	Threaded connection
Suitable for DIN rail mounting	No
Optional DIN rail mounting	No

Number of auxiliary contacts as change contact	2
With integrated low-voltage release	No
Number of poles	4
Connection position for the main voltage circuit	Connection via separate chassis part
Execution of the actuator element	Push button
Complete device with protective device	No
Integrated motorized drive	No
Optional motorized drive	Yes
Protection Class (IP)	IP20