028304 LEGRAND DMX³ UD MP2.10 PROTECTION

DMX³ open-frame switches enable protection and control at the inlet of low-voltage installations from 630A to 6300A. DMX³-I Load Cut Disconnectors allow low-voltage circuits from 1000A to 6300A to be cut and sectioned under load. These power protection devices are available in a fixed or sectional version and can be equipped with interlocking mechanisms for mains inverters. They can be complemented with auxiliaries such as trigger coils, motorized controls, locks, front or rear sockets, separators. The electronic protection units allow precise adjustments of the protection parameters and must be ordered at the same time as the DMX³ for factory installation. The DMX³ 1600 has a complete version pre-equipped with a protection unit. The protection units can be adjusted directly on the display or in combination with a Bluetooth dongle, the parameters can be adjusted via an app.

Device construction	Other
Integrated ground fault protection	Yes
Main Current Circuit Connection Type	Other
Suitable for DIN rail mounting	No
Optional DIN rail mounting	No
With alarm activated	Yes
With integrated low-voltage release	No
Connection position for the main voltage circuit	Other
Execution of the actuator element	Rotary knob (knob)
Complete device with protective device	No
Integrated motorized drive	No
Optional motorized drive	No
Protection Class (IP)	IP20
Width	62 mm

Height	205 mm
Depth	90 mm
Impact resistance	Not applicable
Operating Temperature	-25-70 °C
Storage temperature	-25-85 °C
Type of voltage	Other
Direction of the electricity supply	Other
Display of markings on the connection terminals	No
Colour	Grey
RAL number	7035
Halogen-free	Yes
Connection Cable Type	Other
Label Space/Print Area	No
Contains battery and/or accumulator	No