8718120 LAPP ÖLFLEX CHAIN TM 12G18AWG

proceeds

• Multiple certifications provide various possibilities of use, reduce the variety of products to be used and save storage costs
• TC-ER and MTW certifications allow open laying in cable trays, as well as use in industrial machinery using a single cable
• Resist mineral oil-based lubricants and other chemicals
• Ideal for manufacturers of export-oriented machinery and appliances due to high regulatory acceptance by the North American National Electrical Code NFPA70/NEC (National Electrical Code)
• Suitable for permanent outdoor use, within the indicated temperature range

Scope of use

• For cable chains or moving parts of machines
• Fixed open laying in and between cable trays and industrial machinery according to NEC
• Industrial machinery and machine tools
• Wind farms
• Linear robots, automated handling equipment

Product features

• Greater resistance to oils according to UL OIL RES I and UL OIL RES II.
• No fire spreader according to CSA FT4; UL (Vertical Test)
• Resistant to sunlight; buried directly
• Waterproof, UL 75°C wet

Reference Standards / Approvals

• US (UL) and UL AWM Certification: TC-ER Tray Cable-Exposed Run MTW Machine Tool Wire "Constant Flexing" WTTC Wind Turbine Tray Cable PLTC-ER Power Limited Tray Cable ITC Instrumentation Tray Cable DP-1 Data Processing Cable AWM Style 20886
• Canada Certification c(UL) and CSA AWM: CIC/TC Control Instrumentation, Cable/Tray Cable FT4, AWM I/II A/B FT4
• Class 1 Division 2 according to article NEC 501
• Use on cable chains: please pay attention to the assembly guidelines in Appendix T3.

Product composition

• Extra-fine bare copper threads
• Conductor insulation: PVC with nylon coating
• Braided conductors forming layers and with short braiding steps
• Nonwoven envelope
• Outer jacket: Specially formulated thermoplastic polymer
• Cover color: black (similar to RAL 9005)

ETS Classification 5

• ETIM 5.0 Class-ID: EC000104
• ETIM 5.0 Class Description: Control Cable

Driver Identification Code

• Black with white numbers

Driver training

• Extra-thin wire, according to VDE 0295 CIase 6 / IEC 60228 CIase 6

Torque movement in WTG

• TW-0 and TW-2, see Appendix T0

Minimum radius of curvature

• Flexible: from 7.5 x outside diameter
• Fixed installation: 4 x outside diameter

Nominal voltage

• UL/CSA: 600 V (TC, MTW, CIC), 1000 V (WTTC, AWM)
• IEC: U₀/U 300/500 V

Test voltage

• 2000 V

Protective conductor

• G = with AM/VE protection conductor

Temperature range

• Fixed installation: -40°C (-25°C UL TC) to +90°C (UL TC, MTW, AWM compliant +105°C)
• Mobile: -25°C to +90°C (UL MTW compliant)

Continuous bending cycles

• See the selection table A2-1 in the annex to our online catalogue