73224187 LAPP ÖLFLEX PLUG 540P07 2X1.5 3.5M IP20V250V

proceeds

• Pre-connector cable to save time in installation
• The 3-conductor variants with IP 44 protection rating, a 1.5 mm² conductor section and SchuKo connectors (identifiable by "P07 3G1.5" in the name of the article) meet certain third-party technical specifications. E.g. they comply with the German BG or DGUV in terms of extreme conditions, industrial use category K2, increased electrical risk and use on construction sites.
• Compatible with type E and type F connector systems, as well as pole assignment according to Czech CSN standard for wide use in Europe
• Durable product, thanks to the outer shell material resistant to oils/MUD, abrasion and cuts, as well as the resistance to UV radiation, ozone and hydrolysis of the whole
• Yellow outer shell signage color for quick and visual perception, as well as to prevent accidents and damage

Scope of use

• In the assembly of devices and electrical cabinets, especially for mobile use, connected to the European TN infrastructure with nominal voltage of U0/U = 230/400 V at 50 to 60 Hz
• 3-conductor variants with IP 44 degree of protection are suitable in Europe for outdoor use and may be exposed to rain
• The 3-conductor variants with PROTECTION RATING IP 44 and a conductor section of 1.5 mm2 (identifiable by "P07 3G1.5" in the name of the item) are suitable for industrial use category 2 (K2) according to BGI/GUV-I 600, as heavy type with high electrical hazard according to BGI 594, as well as for difficult mechanical conditions according to DIN VDE 0620-2-1, including construction sites according to DGUV, Information 203-006 (BGI/GUV-I 608) (provided exceptional conditions of service are excluded)
• 2-conductor variants with IP 20 protection rating must not come into contact with water and are generally not intended for industrial applications or construction sites
• Attention to traction discharge during installation. The insulation material of the conductors can be extensible and/or sliding properties, so it must be ensured that the unipolar cables of the cable are free of tensile forces during installation. Disconnect the voltage source by pulling directly on the black connector, never the yellow wire.

Product features

• Cable: ÖLFLEX^®540P LAPP, Flexible Connection Cable Class 5 for Occasional Bending and Color-Coded HD 308/ VDE 0293-308
• Yellow PUR cable outer shell: Halogen-free, flame retardant according to IEC 60332-1-2, resistant to UV rays, ozone, abrasion, cuts, hydrolysis, microbes, oil resistant according to EN 50363-10-2 and MUD resistant to drilling fluids according to Appendix D of IEC 61892-4
• The integrated ÖLFLEX® 540 P cable resists high mechanical loads and is resistant to acids, bleaches and mineral oils
• Plug-fit systems Type E (French) and Type F: CEE 7/17 plugs w/o earthing contact equally plug-compatible with both systems, CEE 7/7 plug w/ earthing contact additionally earth contacting to both plug-fit systems
• Depending on the latest standard version of the product: degree of protection IP20 (EEC 7/17) or IP44 (EEC 7/7);
  Standard connectors with IP44 meet the difficult conditions according to Appendix C of VDE 0620-2-1;
  rated current of all standard connectors 16 A according to DIN VDE 0620-2-1;
  UV-resistant black connectors

Reference Standards / Approvals

• Cable ÖLFLEX^®540 P of LAPP:
  Reg. No. VDE 6583 - CA 300/500 V up to 1 mm²;
  Reg. No. VDE 6584 - CA 450/750 V from 1.5 mm²
• Standard connector extruded and tested according to DIN VDE 0620-2-1 (and other corresponding national model standards). Certified according to KEMA-KEUR by a DEKRA accredited third party body
• Standard connector extruded and tested according to IEC 60884-1. Certified according to IECEE/IEC by a DEKRA accredited third party body, based on the CB Scheme verification procedure
• Standard bases for the second end processed (peeling, de-skinning, crimping): DIN EN 61238-1 (VDE 0220), DIN EN 60352-2

Product composition

• TPE/PUR ÖLFLEX cable® 540 P with VDE registration, flexible, (class 5 according to IEC 60228), yellow, resistant to chemicals, color-coded according to HD 308/ VDE 0293-308 and different classes of nominal voltage IEC U0/U depending on the nominal section of the conductor (see "Technical characteristics")
• Single-phase connector according to DIN VDE 0620-2-1 with nominal voltage of 250 V, black, extruded
• Connection systems type E (French) and type F: CEE 7/17 non-contact protection connector equally compatible with plug for both systems, CEE 7/7 plug with protection contact additionally for both systems also with protection contact. Both CEE connectors with functional allocation of pole contacts according to Czech CSN standard, but according to most European assignments
• Standard connector, option 1: 2-pole connector, round, non-beset / straight contour, no protective contacts (based on CEE 7/17), PVC material, protection grade IP 20 (non-watertight)
• Standard connector, option 2: 2-pole connector with protective contact (based on CEE 7/7), non-bending/straight, PVC material, protection grade IP 44 (splash protection)
• Second end of cable: Peeled 3 cm from the end of the cable, without welds / crimping sleeves mechanically crimped in peeled conductors without connection tab and with metal collar crimped in the insulator of the conductor, according to DIN EN 60352-2
• On demand: Standard-like version with additional LAPP part number with additional reinforced traction discharge between the outer cable cover and surrounding connector extrusion

ETS Classification 5

• ETIM 5.0 Class ID: EC001576
• ETIM Class 5.0 Description: Power Cord

ETTIM Rating 6

• ETIM 6.0 Class ID: EC001576
• ETIM 6.0 Class-Description: Network Connection Cable

Driver Identification Code

• According to VDE 0293-308 (Table T9 of the appendix)

Driver training

• Fine wire, according to VDE 0295 CIase 5 / IEC 60228 CIase 5

Minimum radius of curvature

• Occasional flexible use: 10 x outer diameter
• Fixed installation: 4 x outside diameter

Nominal voltage

• The rated voltage 250 V of the connectors according to VDE 0620-2-1 isonlyrelevant andadmissible forthecontinuous operation of all finished confection
• The IEC rated alternating voltage classes of the LAPP ÖLFLEX® 540 P cable depend on the rated section of the conductor:
  Up to 1 mm2 incl.: U0/U = 300/500 V;
  Conductors 1.5 mm2 and above: U0/U = 450/750 V
  (does not support as a reference for the maximum continuous operating voltage of all connectorized wiring; instead, only the 250 V connector rated voltage according to VDE 0620-2-1 is permissible

Test voltage

• Mounting: 2000 V

Protective conductor

• G = with AM/VE protection conductor