700752 LAPP ÖLFLEX SERVO FD 7TCE 4G12AWG

proceeds

• Multiple certifications provide various possibilities of use, reduce the variety of products to be used and save storage costs
• TC-ER and Flexible Motor Supply Cable Listings allow unprotected laying in cable trays as well as static and highly flexible use for industrial machinery with the same cable
• Economical, easy to install, since it does not require closed pipes (suitable for open installations)
• Low capacity construction allows for longer cable lengths between converter and drive
• Resistant to contact with lubricants based on mineral oil, dilute acids, aqueous alkaline solutions and other chemical agents
• Ideal for manufacturers of export-oriented machinery and appliances due to high regulatory acceptance by the North American National Electrical Code NFPA70/NEC (National Electrical Code)

Scope of use

• Connection cable between the servo controller and the motor
• For cable chains or moving parts of machines
• Fixed open laying in and between cable trays and industrial machinery according to NEC
• Industrial machinery and machine tools
• Linear robots, automated handling equipment
• Assembly lines, production lines, in any type of machinery.

Product features

• Oil resistant according to UL OIL RES I & II
• No fire spreader according to CSA FT4; UL (Vertical Test)
• -40°C Cold Bend; -25°C Cold Impact; 90°C Wet or Dry
• Sunlight resistant (UV resistance)
• Direct burial capacity (direct burial capacity according to U.S. guidelines)
• Low capacity

Reference Standards / Approvals

• UL TC-ER (Exposed Run) according to UL 1277
• Flexible Motor Supply cable according to UL 2277
• Class 1 Division 2 according to article NEC 501
• c(UL) CIC FT4 (18AWG - 14AWG);
  cRU AWM I/II A/B FT4
• Use on cable chains: please pay attention to the assembly guidelines in Appendix T3.

Product composition

• Extra-fine bare copper threads
• Conductor Insulation: EPR Mix
• Individual design depending on each reference: power conductors with one or two independently shielded control pairs. Braided control and feed pairs with short pitch lengths
• Nonwoven envelope
• Tinned copper braid screen
• Outer shell: Specially designed thermoplastic elastomer (TPE), orange

ETS Classification 5

• ETIM 5.0 Class ID: EC000057
• ETIM Class 5.0 Description: Low Voltage Power Cable

Driver Identification Code

• Power conductors: black with U/L1/C/L+ marking; V/L2; W/L3/D /L-; GN/YE protection conductor
• Optional designs with
  a pair of control conductors: black; white
  Two pairs of control conductors: black with white numbers: 5, 6, 7, 8

Certifications

• USA: UL TC-ER, Flexible Motor Supply Canada: c(UL) CIC/TC FT4, cRU AWM I/II A/B FT4

Driver training

• Extra-thin wire, according to VDE 0295 CIase 6 / IEC 60228 CIase 6

Minimum radius of curvature

• Flexible: from 7.5 x outside diameter
• Fixed installation: 5 x outer diameter

Nominal voltage

• UL TC: 600V
  UL Flexible Motor Supply: 1000V
  c(UL) CIC/TC: 600V
  cRU AWM: 1000V
• IEC U₀/U: 600/1000 V

Test voltage

• Driver/conductor: 4 kV
• Driver / Display: 2 kV

Protective conductor

• G = with AM/VE protection conductor

Temperature range

• Mobile: -5°C to +90°C
  Fixed installation: -40 °C to +90 °C

Continuous bending cycles

• See the selection table A2-1 in the annex to our online catalogue