4180505 LAPP Multi-Standard SC 1 1X0,75 WH

proceeds

• For use in major global markets
• Reduction in the management of technical documentation
• Easy storage
• Greater savings in the production process

Scope of use

• Factory wiring
• Inner wiring of devices
• Wiring of control cabinets

Product features

• Non-flame propagator, according to IEC 60332-1-2
• Non-flame propagator, according to UL VW1/CSA FT1.
• Oil resistant

Reference Standards / Approvals

• Cables according to IEC and American standard have braided conductors with nominal sizes in mm² or AWG/kcmil. The main size is mentioned in the table below, and the equivalent size of the other system can be found in Appendix T16 of this catalog. for this related secondary size the cross-section of the conductor is usually greater than the specified nominal value
• Certifications: <HAR>H05V-K according to EN 50525-2-31; UL AWM styles 1007 and 1569 (by UL, conforming to UL standard 758, U.I. Lapp GmbH, UL AWM dossier number: E63634); CSA AWM I A/B (by CSA, according to CSA standard C22.2 No. 210-05, CSA class 5851-01)

Product composition

• Conductor of fine tinned copper wires
• Special PVC base insulation.

ETS Classification 5

• ETIM 5.0 Class-ID: EC000993
• ETIM Class 5.0 Description: Unipolar Cable

ETTIM Rating 6

• ETIM 6.0 Class-ID: EC000993
• ETIM 6.0 Class-Description: Conductor Cable

Driver training

• Fine wire, according to VDE 0295 CIase 5 / IEC 60228 CIase 5

Minimum radius of curvature

• 4x outer diameter (DE) for normal use; 2 x SD for moderate flexion

Nominal voltage

• HAR/IEC: U₀/U: 300/500 V;
  UL (AWM): U: 300 V;
  CSA (AWM I A/B): U: 300 V

Test voltage

• 2000 V

Temperature range

• Fixed installation: HAR/ IEC: -40°C to +70°C; UL (AWM): up to +105 °C; CSA (AWM I A/B): up to +105 °C