4150402K LAPP MULTI-STANDARD SC 2.2 EMBOSS 1X1.5 BU

proceeds

• For use in major global markets
• Reduction in the management of technical documentation
• Easier storage; increases the cost efficiency of the production process
• Use XL insulated terminal toe caps

Scope of use

• Factory wiring
• Field wiring
• Inner wiring of devices and cabinets
• Protected laying in luminaires
• Unipolar cables with green insulation ≥ 4 AWG can be used as a protective conductor (EGC/Equipment Earthing Conductor) in trays according to NFPA 70 (NEC)

Product features

• Non-flame propagator, according to IEC 60332-1-2
• Non-flame propagator, according to UL VW1/CSA FT1.
• Oil resistant

Reference Standards / Approvals

• Cables according to IEC and American standard have braided conductors with nominal sizes in mm² or AWG/kcmil. The main size is mentioned in the table below, and the equivalent size of the other system can be found in Appendix T16 of this catalog. for this related secondary size the cross-section of the conductor is usually greater than the specified nominal value
• Certifications: <HAR>H07V2-K according to EN 50525-2-31; UL AWM style 10269 (by UL, conforming to UL 758 standard, U.I. Lapp GmbH, UL AWM dossier number: E63634), (UL) MTW (by UL, conforming to UL standard 1063, U.I. Lapp GmbH, dossier number (UL) MTW: E198296), CSA TEW (by CSA, conforming to CSA standard C22.2 No. 127, CSA class 5835-01)

Product composition

• Conductor of fine tinned copper wires
• Special PVC base insulation.

ETS Classification 5

• ETIM 5.0 Class-ID: EC000993
• ETIM Class 5.0 Description: Unipolar Cable

ETTIM Rating 6

• ETIM 6.0 Class-ID: EC000993
• ETIM 6.0 Class-Description: Conductor Cable

Driver training

• Fine wire, according to VDE 0295 CIase 5 / IEC 60228 CIase 5

Minimum radius of curvature

• 8 mm ≤: 4 x DE*/2 x DE**; 8 < DE≤ 12 mm: 5 x DE*/3 x DE**; >12 mm: 6 x DE*/4 x DE**

Nominal voltage

• HAR/IEC: U₀/U: 450/750 V;
  UL (AWM): U: 1000 V;
• UL (MTW): U: 600 V;
  CSA (TEW): U: 600 V

Temperature range

• Fixed installation: HAR / IEC: -40 °C to +90 °C; UL (AWM): up to +105 °C;
• UL (MTW): up to +90 °C; CSA (TEW): up to +105 °C