3022220 LAPP J-H(ST)H...BD 2x2x0,6

Benefits

• They are used to ensure fire safety, protect people and material values
• In the event of a fire, no toxic flue and corrosive gases are generated, and there is no spread of fire
• Static shield made of laminated aluminum foil with contact conductor inlet, reduces the impact of high-frequency electromagnetic interference
• Crosstalk and mutual interference are reduced due to paired stranding of the cores
• J-H(ST)H... BD Fire alarm cable is marked "Fire alarm cable" at regular intervals along the length of its sheath. Designed specifically for installation in fire alarm systems.

Applications

• This halogen-free, flame-resistant static shield cable is stationary and is used for signal transmission, telephony and measurement in all classes of subscriber telephones and communication devices
• For use in rooms with dry or wet environments for fixed laying
  under/over plaster

Features

• Flame retardant in accordance with DIN VDE 0472-804/08.83, test type C
• Halogen-free according to EN 50267-2-1/-2

Standards / Certificates of Conformity

• In accordance with DIN VDE 0815 type J-H(ST)H... BD

Design

• Single-strand copper conductor
• Insulation of cores made of a special halogen-free mixture
• The veins are twisted into star worms, 5 worms are twisted into a bundle, the total twist of the bundles
• Wrapping with film,
  Static screen made of laminated aluminum foil with contact copper wire inlet
• Outer sheath made of halogen-free mixture,
  Color: Grey (RAL 7001)

ETIM Classification 5

• ETIM 5.0 Class-ID: EC000829
• ETIM 5.0 Class-Description: Telecommunication Signal Cable

ETIM Classification 6

• ETIM 6.0 class designation: EC000829
• ETIM Class 6.0 Description: Telecommunication Cable

Vein marking

• In accordance with VDE 0815, see Table T 10

Operating Capacity

• max. 120 nF/km

Capacitive Coupling

• K1: approx. 300 pF/100 m
• K9-12: approx. 100 pF/100 m

Minimum bending radius

• Fixed gasket: 8 outer diameters

Test Voltage

• Core/core: 800V
• Core/Screen: 800V

Loop resistance

• 0.6 mm core: max. 130 Ohm/km
• 0.8 mm core:
  max. 73.2 Ω/km

Conductor cross-section

• 0.6 mm core: 0.28 mm²
• 0.8 mm core: 0.5 mm²

Temperature range

• Limited mobility from -5°C to +50°C
• Stationary application: -30 to +70 °C