2210705 H01N2-D 1X95 LAPP H01N2-D 1X95

Benefits

• Type-compliant versions <HAR>-certified with "<HAR>” testing and certification mark for accelerated granting of approvals if final application of cable is within the European CENELEC area

Application range

• Use the welding cable only under consideration of EN 50565-2
• For use on handheld electrode holder up to 100 V
• Can be used in dry or damp rooms
• For transmitting high currents from the electric welding device to the welding tool

Product features

• Flame-retardant according IEC 60332-1-2

Norm references / Approvals

• <HAR> H01N2-D cable type approval according to EN 50525-2-81

Product Make-up

• Bare copper wire according to HAR
• Stranding approximately corresponds to class 6 up to 95 mm², and from 120 mm² approximately to class 5 acc. to VDE 0295
• Separator made of synthetic film or paper
• Outer sheath: rubber compound, type EM5

Classification ETIM 5

• ETIM 5.0 Class-ID: EC000824
• ETIM 5.0 Class-Description: Welding cable

Classification ETIM 6

• ETIM 6.0 Class-ID: EC000824
• ETIM 6.0 Class-Description: Welding cable

Conductor stranding

• H01N2-D according to EN 50525-2-81

Minimum bending radius

• Flexible use: 12 x outer diameter

Nominal voltage

• U0/U: 100/100 V

Test voltage

• 1000 V

Current rating

• According to VDE 0298 Part 4, table 16
• EN 50565-1/ VDE 0298-565-1

Temperature range

• Flexible use: -25°C to +85°C