2170955 LAPP ETHERLINE LAN Cat.6 U/UTP 4x2xAWG24 LSZH

proceeds

• LAN cables for structured cabling of buildings according to EN 50173 and ISO/IEC 11801

Scope of use

• In areas of high terminal density
• For wiring offices, administrative and development buildings in the tertiary area (wiring on technical floor).
• In accordance with ISO/IEC 11801 and EN 50173 standards, cable length in areas of tertiary use (horizontal spaces, floors) shall not exceed 100 m (90 m in the cable duct + 10 meters in work areas)

Product features

• Transmission of digital and analog data signals
• IEEE 802.3: 10/100/1000Base-T
  IEEE 802.5: ISDN; FDDI; ATM
• Non-flame propagator, according to IEC 60332-1-2

Reference Standards / Approvals

• LAPP CAT.7a LAN cables for "Structured Cabling Systems" comply with the requirements established in the EIA/TIA-568, TSB36, ISO/IEC 11801 and EN50173 standards (class F- permanent connection).
• ISO/IEC 11801 Class E is equivalent to CAT.6

Product composition

• Solid conductor (unifilar)
• U/UTP: no general or pair shielding, 2 conductors per pair, 4 twisted pairs with separator cross
• F/UTP: Tape screen as general shielding, 2 braided conductors per pair, 4 twisted pairs with separator cross
• Outer shell, PVC version (grey RAL 7035) or LSZH (orange RAL 2003)

ETS Classification 5

ETTIM Rating 6

• ETIM 6.0 Class ID: EC000830
• ETIM 6.0 Class-Description: Data Cable

Minimum radius of curvature

• Fixed installation: 4 x outside diameter
• During laying: 8 x outer diameter

Characteristic impedance

• 100 Ω ± 15%

Temperature range

• During installation: 0 °C to +50 °C
• Fixed installation: –20 °C to +60 °C