11139619 LAPP UNITRONIC FD CP plus A 4X0,34

Benefits

• Wide temperature range for applications in harsh climatic environments
• Overall braid minimises electrical
  interference
• UL AWM voltage rating 1000V in case of internal wiring (for instance, inside Industrial Platform under Field Labeling) allows for internal laying next to power cables with applied UL rating of 1kV
• In the USA inside of industrial machines and in chain track inside Industrial Platform under Field Labeling (subject to AHJ approval), per NFPA 79, Section 12.9.2 (condition 3 under 12.9.2: Thru 1 mm² and <16 AWG)

Application range

• Suitable for use in measuring, control and regulating circuits
• Sophisticated design for high-performance chain/ track use
• For use in chain/carrier: Please respect the assembly guidelines listed in Appendix T3
• Linear robots, automated handling equipment
• Suitable for torsional applications which are typical for the loop in wind turbine generators (WTG)

Product features

• Halogen-free, has low capacitance and is flexible down to -40°C
• PUR outer sheath, tear and notch-resistant, resistant to mineral oils and abrasion when used in power chains
• Low-adhesive surface, resistant to hydrolysis and microbes, commonly for outdoor use (not in North America) thanks to UV and ozone resistance
• Flame retardance: IEC 60332-1-2, FT2

Norm references / Approvals

• cRUus AWM certified by UL (UL: E63634): UL AWM Style 21576 and AWM A/B I/II

Product Make-up

• Extra-fine wire strand made of bare copper wires
• Core insulation: Based on Polyolefin
• Non-woven wrapping
• Tinned-copper braiding
• Outer sheath made of special PUR compound
  Outer sheath colour: grey (RAL 7001)

Classification ETIM 5

• ETIM 5.0 Class-ID: EC000104
• ETIM 5.0 Class-Description: Control cable

Classification ETIM 6

• ETIM 6.0 Class-ID: EC000104
• ETIM 6.0 Class-Description: Control cable

Core identification code

• DIN 47100, refer to Appendix T9

Mutual capacitance

• C/C approx. 60 nF/km

Inductivity

• approx. 0.65 mH/km

Conductor stranding

• Stranded, extra-fine wire

Torsion movement in WTG

• TW-0 & TW-2, refer to Appendix T0

Minimum bending radius

• Flexing: 7.5 x outer diameter
• Fixed installation: 4 x outer diameter

Test voltage

• Core/Core: 1500 V
• Core/Shield: 1500 V

Temperature range

• -40°C to +80°C
  cRUus AWM: max. +80°C