11139525 LAPP UNITRONIC FD CP (TP) plus A 6X2X0,5

proceeds

• Extended temperature range for applications in severe environmental conditions
• Decoupling of electrical circuits by structure in twisted pairs (crosstalk effects)
• UL-AWM 1000V rated voltage for protected internal wiring (e.g. within the industrial area) allows internal laying directly next to the power cables with applied UL rated voltage of 1 kV
• In the U.S. inside industrial machinery and on energy chains within the industrial area (subject to AHJ approval), according to NFPA 79, section 12.9.2 (exception 3 under 12.9.2: up to 1 mm2 and <16 AWG)
• General shielding minimizes electrical interference

Scope of use

• Use in measurement, command and control circuits.
• Linear robots, automated handling equipment
• Sophisticated design for high-performance chain/ track use
• For use in chain/carrier: Please respect the assembly guidelines listed in Appendix T3
• Suitable for torsion applications in the "drip loop" of wind turbines (WTG)

Product features

• Halogen-free, has a low capacitance and is flexible up to -40°C
• PUR outer shell, resistant to cuts and incisions, resistant to mineral oils and abrasion derived from use in energy chains.
• Low adhesion surface, resistant to hydrolysis and microbes, generally for outdoor use (not in North America) thanks to resistance to UV radiation and ozone
• Non-flame propagator: IEC 60332-1-2, FT2

Reference Standards / Approvals

• cRUus AWM, UL certified (UL: E63634): UL AWM Style 21576, as well as AWM A/B I/II

Product composition

• Super-fine braided conductors of bare copper wires (class 6)
• Conductor isolation: based on TP structure
  of polyolefin
• Nonwoven envelope
• Tinned copper braid screen
• Outer shell made with special PUR compound
  Outer shell color: grey (RAL 7001)

ETS Classification 5

• ETIM 5.0 Class-ID: EC000104
• ETIM 5.0 Class Description: Control Cable

ETTIM Rating 6

• ETIM 6.0 Class-ID: EC000104
• ETIM 6.0 Class-Description: Control Line

Driver Identification Code

• DIN 47100 (Table T9 of the Appendix)

Mutual capacity

• Up to 0.5 mm²: 60 nF/km
• Up to 1.0 mm²: 70 nF/km

Inductance

• Approx. 0.65 mH/km

Driver training

• Conductor, superfine thread

Torque movement in WTG

• TW-0 and TW-2, see Appendix T0

Minimum radius of curvature

• Flexion: 7.5 x outer diameter
• Fixed installation: 4 x outside diameter

Test voltage

• driver/conductor: 1500 V
• Driver/display: 1500 V

Temperature range

• -40°C to +80°C
  cRUus AWM: max. +80°C