1026571 LAPP ÖLFLEX CHAIN 90 CP 1X240

Benefits

• Allows much faster speed and accelerations which increases the economic efficiency of the machines
• Increased durability under harsh conditions thanks to robust PUR outer sheath
• Resistant to contact with many mineral oil-based lubricants, diluted acids, aqueous alkaline solutions and other chemical media
• Wide temperature range for applications in harsh climatic environments
• Longer cable installation lengths thanks to low mutual capacitance cable design
• Copper screening complies with EMC requirements and protects against electromagnetic interference

Application range

• In power chains or moving machine parts
• For internal wiring of electric and electronic equipment in switch cabinets
• Specially designed for power circuits of servomotors driven by frequency converters
• This cable can substitute screened multi-core motor cables where space requirements or minimum bending radii cause problems
• Test systems in the automotive industry, vehicles and stationary fuel cell systems
• For indoor and outdoor use

Product features

• Flammability:
  - Halogen-free acc. to VDE 0472-815
  - Flame retardant acc. to IEC 60332-1-2 or
  UL/cUL VW-1, FT1
  - No flame propagation acc. to
  IEC 60332-3-24 Cat. C or /-25 Cat. D
• Good weather, UV and oil resistance
• Flexible at low temperatures
• Low-capacitance design
• EMC-compliant

Norm references / Approvals

• DNV GL approved
• USA: UL AWM Style 11624, VW-1
  Canada: cUL AWM I/II A, FT1
• UL File No. E63634
• For use in power chains: Please comply with assembly guideline Appendix T3

Product Make-up

• Extra-fine wire strand made of bare copper wires (class 6)
• Core insulation: TPE compound
• Non-woven wrapping
• Tinned-copper braiding
• PUR outer sheath, black (similar RAL 9005)

Classification ETIM 5

• ETIM 5.0 Class-ID: EC000057
• ETIM 5.0 Class-Description: Low voltage power cable

Classification ETIM 6

• ETIM 6.0 Class-ID: EC000057
• ETIM 6.0 Class-Description: Low voltage power cable

Core identification code

• Black, other colours are available upon request

Conductor stranding

• Extra-fine wire according to VDE 0295, class 6/IEC 60228 class 6

Minimum bending radius

• Flexing: up from 7.5 x outer diameter
• Fixed installation: 3 x outer diameter

Nominal voltage

• IEC: U₀/U 600/1000 V
• UL & CSA: 1000 V

Test voltage

• 4000 V

Temperature range

• Flexing: -35°C to +80°C
• Fixed installation: -50°C to +80°C

Bending cycles & operation parameters

• See Selection Table A2-1 in the appendix of our online catalogue