1023759 LAPP H1Z2Z2-K, OPTIMIZED VERSION 1X4 BK

Benefits

• Reduction of flame propagation and of toxic combustion gases in the event of fire
• Robust against mechanical impacts
• For outdoor applications
• Inside the EU, and particularly on site, applicable for many building types as per local, legal implementation of EU CPR - Construction Product Regulation (EU) No. 305/2011, thanks to Dca Classification
• 25 years in expectable lifespan under normal use conditions as defined in EN 50618

Application range

• For free and stationary or for freely suspended outdoor and indoor cabling between the solar modules, or between the module strings and the DC/AC inverter, for example in line with HD 60364-7-712 on PV systems, and EN 50618 on H1Z2Z2-K cable type, etc....; Short circuit and earth fault protected per EN 50618, Annex A, and per HD 60364-5-52
• Photovoltaic systems with DC system voltage up to 1800 V to ground
• As per EN 50618, Annex A, inside electrical installation pipe/ duct/ channel, plaster, and appliance, as well as inside or connected to double insulated/ protected appliance or system of protection class II
• AD8: Permanent water contact and submersion down to 1 metre in water depth
• Increased, mechanical robustness, for instance in the event of impact, with regard to assessed, burial based Impact-Resistance Test and Crushing-Resistance Test per UL 854

Product features

• Weather/ UV resistant per EN 50618, Annex E, as well as ozone resistant per EN 50396;
  Transversely watertight "AD8" per IEC 60364-5-51/ HD 60364-5-51, IEC 62440, and EN 50525-2-21 down to 1 metre in water depth
• Flame retardant per IEC 60332-1-2, and Dca classified per EU CPR - Construction Product Regulation (EU) No. 305/2011
• Halogen-free according to IEC 60754-1 (amount of halogen acid gas),
  Low Corrosiveness of combustion gases according to IEC 60754-2 (degree of acidity)
• Good notch and abrasion resistance
• Tested against burial-related, mechanical UL 854 Tests Impact-Resistance and Crushing-Resistance

Norm references / Approvals

• H1Z2Z2-K type certified according to EN 50618
• Items with other cross-sections on request

Product Make-up

• Fine-wire, tinned-copper conductor
• Coreinsulation made of cross-linked copolymer
• Outer sheath made of cross-linked copolymer
• Outer sheath colour: black, red or blue
• Further single colours for the outer sheath on request

Classification ETIM 5

• ETIM 5.0 Class-ID: EC001578
• ETIM 5.0 Class-Description: Flexible cable

Classification ETIM 6

• ETIM 6.0 Class-ID: EC001578
• ETIM 6.0 Class-Description: Flexible cable

Conductor stranding

• Fine wire according to VDE 0295,
  class 5/IEC 60228 class 5

Minimum bending radius

• 4 x OD

Nominal voltage

• AC U₀/U: 1.0/1.0 kV
  DC U₀/U: 1.5/1.5 kV
  Max. permissible DC operating voltage: 1.8 kV

Test voltage

• AC 6500 V
• DC 15000 V

Current rating

• Im compliance with EN 50618, Table A.3
• Acc. to EN 50618, reduction factors for clustered wiring per... HD 60364-5-52

Temperature range

• >Conductor..., max., per EN 60216-1: 120°C;
  >Conductor..., max., short-circuit/ earth fault (period of max. 5 s): 250°C;
  >Ambient..., min., stationary use: -40°C;
  >Ambient..., min., flexible use or during installation: -25°C;
  >Ambient..., max., in conjunction with EN 60216-1: 90°C;
  >Ambient..., constant, in conjunction with HD 60364-7-712: 70°C to 90°C;
  >Ambient..., ambient temp. related reduction factor 1.00: 60°C;
  >Ambient..., max., storage: 40°C