1023602 LAPP ÖLFLEX SOLAR XLWP 1x6 WH/BK

Benefits

• The alternative for water coverage, e.g. due to elevated water line caused by flooding
• Reduction of flame propagation and of toxic combustion gases in the event of fire
• Robust against mechanical impacts
• Extruded colour stripe serves as reverse polarity protection during installation.
• Exact quantity control during installation by meter marking on the cable sheath

Application range

• Photovoltaic systems with DC system voltage up to 1800 V to ground
• For the cabling between the solar modules and as extension cable between the module strings and the DC/AC inverter
• Flexible or building-integrated PV systems
• Underground use without protection conduit/ duct in professionally built cable trench with at least 50 cm of back-fill soil (70 cm underneath roads), above indicating tape, above covering plastic slab, above at least 10 cm of covering sand layer, above the cable laid on at least 10 cm high sand bed layer (cf.: VDE 0891-6, Section 4.2)
• In September 2018 and based on AD8 watertightness, this product was recommended by Solartechnik Bayern for underground use typically realized via underground conduits/ ducts (...) for PV applications

Product features

• Weather/ UV resistant per EN 50618, Annex E, as well as ozone resistant per EN 50396;
  Transversely watertight "AD8" per IEC 60364-5-51/ HD 60364-5-51, IEC 62440, and EN 50525-2-21 down to 1 metre in water depth
• Halogen-free and flame-retardant
• Good notch and abrasion resistance
• Tested against burial-related, mechanical UL 854 Tests Impact-Resistance and Crushing-Resistance
• XLWP = X-Linked + Water-Proof (Permanent water contact AD8 acc. to IEC 60364-5-51, 1 mtr. in max. submersion depth @ temperature of widely unmoved water between 5 °C and 40 °C),
  Proven electron beam cross-linked quality

Norm references / Approvals

• H1Z2Z2-K type certified according to EN 50618
• Items with other cross-sections on request

Product Make-up

• Fine-wire, tinned-copper conductor
• Core insulation made of electron beam cross-linked copolymer
• Colour of core insulation: white
• Outer sheath made of electron beam cross-linked copolymer
• Outer sheath colour: Black only, or Black with Red or Blue stripe

Classification ETIM 5

• ETIM 5.0 Class-ID: EC001578
• ETIM 5.0 Class-Description: Flexible cable

Classification ETIM 6

• ETIM 6.0 Class-ID: EC001578
• ETIM 6.0 Class-Description: Flexible cable

Conductor stranding

• Fine wire according to VDE 0295,
  class 5/IEC 60228 class 5

Minimum bending radius

• D</=8mm: 4D;
  8<D</=12mm: 5D;
  D>12mm: 6D
• *D= Cable's outer diameter

Nominal voltage

• AC U₀/U: 1.0/1.0 kV
  DC U₀/U: 1.5/1.5 kV
  Max. permissible DC operating voltage: 1.8 kV

Test voltage

• AC 6500 V

Current rating

• Im compliance with EN 50618, Table A.3

Temperature range

• -40°C to +120°C max. conductor temperature based on EN 60216-1
  Ambient temperature range according to EN 50618: -40°C to +90°C