1023375 LAPP (4G1,5+(2x0,75)+(4x24AWG))

Benefits

• Allows much faster speed and accelerations which increases the economic efficiency of the machines
• Only one connection line between drive and motor-feedback system. Instead of the encoder cable integrated data pairs, quads or signal cores take over the signalling.
• Less cables and reduced connection costs
• Space and weight savings thanks to hybrid cable design
• Increased durability under harsh conditions thanks to robust PUR outer sheath
• Resistant to contact with many mineral oil-based lubricants, diluted acids, aqueous alkaline solutions and other chemical media

Application range

• Power drive systems in automation engineering
• Connecting cable between servo controller and motor
• In power chains or moving machine parts
• For use in assembling & pick-and-place machinery
• Particularly in wet areas of machine tools and transfer lines
• For indoor and outdoor use

Product features

• OCS - One Cable Solution
• High oil-resistance
• Abrasion and notch-resistant
• Flammability:
  UL/CSA: VW-1, FT1
  IEC/EN: 60332-1-2
• Halogen-free materials
• Flexible at low temperatures

Norm references / Approvals

• UL AWM Style 21223 or 20233
  cRU AWM I/II A/B FT1
• UL File No. E63634
• For use in power chains: Please comply with assembly guideline Appendix T3

Product Make-up

• Extra-fine or fine wired conductor made of bare or tinned copper
• Core insulation: polypropylene (PP)
• Individual design depending on the item: power cores with screened control pair or bundle and specific data pairs, quads or signal cores twisted together
• Non-woven wrapping
• Tinned-copper braiding
• PUR outer sheath, orange (RAL 2003)

Classification ETIM 5

• ETIM 5.0 Class-ID: EC000104
• ETIM 5.0 Class-Description: Control cable

Classification ETIM 6

• ETIM 6.0 Class-ID: EC000104
• ETIM 6.0 Class-Description: Control cable

Core identification code

• Details see datasheet

Conductor stranding

• Power cores and brake pairs or triplets: Extra-fine wire according to VDE 0295, class 6/IEC 60228 class 6
• Signal cores, data pairs or star quads: Fine-wired

Minimum bending radius

• Flexing: 7.5 x outer diameter
• Fixed installation: 5 x outer diameter

Nominal voltage

• Power and control cores:
  Version 1,3 & 4: IEC U₀/U 600/1000 V
  Version 2: IEC 300 V
  UL all versions: see data sheet
  Individual data pairs and quads:
  see data sheet

Test voltage

• Details see datasheet

Protective conductor

• G = with GN-YE protective conductor

Temperature range

• Flexing: -40°C to +80°C
• Fixed installation: -50°C to +80°C

Bending cycles & operation parameters

• See Selection Table A2-1 in the appendix of our online catalogue