1023352 LAPP ÖLFLEX SERVO 3D 7DSL 4G1,5+(2x1)+(2x22 A

Benefits

• Allows much faster speed and accelerations which increases the economic efficiency of the machines
• Only one connection line between drive and motor-feedback system. Instead of the encoder cable a specific integrated data pair takes over the signalling.
• Less cables and reduced connection costs
• Space and weight savings thanks to hybrid cable design
• Increased durability under harsh conditions thanks to robust PUR outer sheath
• Resistant to contact with many mineral oil-based lubricants, diluted acids, aqueous alkaline solutions and other chemical media

Application range

• Connecting cable between servo controller and motor
• In industrial robots, moving machine parts or drag chains
• Automated handling equipment
• Particularly in wet areas of machine tools and transfer lines
• Inside of dresspacks of buckling arm robots and for use for gantry robots
• For indoor and outdoor use

Product features

• High oil-resistance
• Abrasion and notch-resistant
• Flammability:
  UL/CSA: VW-1, FT1
  IEC/EN: 60332-1-2
• Flexible at low temperatures
• Low-capacitance design

Norm references / Approvals

• UL AWM Style 21223
  cRU AWM I/II A/B FT1
• UL File No. E63634
• Designed for up to 5 million torsion cycles
• For use in power chains: Please comply with assembly guideline Appendix T3

Product Make-up

• Extra-fine-wire, bare copper conductor (power cores and control pair) and 19-wire, tinned copper conductor (data pair)
• Core insulation: Polypropylene (PP) respectively fluorinated ethylene propylene (FEP)
• Power cores with screened control pair and data pair twisted together
• Special tape wrapping
• Spiral shield made of tinned copper wires
• Wrapping of PTFE tape
• PUR outer sheath, black (similar RAL 9005)

Classification ETIM 5

• ETIM 5.0 Class-ID: EC000104
• ETIM 5.0 Class-Description: Control cable

Classification ETIM 6

• ETIM 6.0 Class-ID: EC000104
• ETIM 6.0 Class-Description: Control cable

Core identification code

• Power cores: black with marking U/L1/C/L+; V/L2; W/L3/D /L-; GN/YE protective conductor
• Data pair: white, blue
  Control pair: black, white

Conductor stranding

• Extra-fine wire according to VDE 0295, class 6/IEC 60228 class 6
• DSL data pair: 19-wired

Torsion

• Torsion load max. ± 180 °/m

Minimum bending radius

• Moved: 10 x outer diameter
• Fixed installation: 5 x outer diameter

Nominal voltage

• Power and control cores:
  IEC: U0/U: 600/1000 V
  UL: 600 V
  Data pair UL: 600 V

Test voltage

• Power and control: 4 kV
  Data pair: 1kV

Protective conductor

• G = with GN-YE protective conductor

Temperature range

• Flexing: -40°C to +80°C
• Fixed installation: -50°C to +80°C