0036940 LAPP ÖLFLEX SERVO FD 798 CP (6x2x0,25)

proceeds

• For faster moving processes and thus increases the efficiency of the machines
• Suitable for use in encoders and resolvers from major manufacturers
• Optimized size, weight and volume
• Greater durability in aggressive applications, thanks to pur's robust cover.
• Resistant to contact with lubricants based on mineral oil, dilute acids, aqueous alkaline solutions and other chemical agents
• Extended temperature range for applications in severe environmental conditions

Scope of use

• Connection cable between the servo controller and the encoder/resolver.
• Connection cable between the servo controller and the variable speed drives
• For cable chains or moving parts of machines
• Especially suitable for wet areas of machine tools and transfer lines
• Assembly lines, production lines, in any type of machinery.
• For indoor and outdoor use

Product features

• Fire performance: UL/CSA VW-1, FT1 IEC/EN 60332-1-2
• Halogen-free materials
• Low-capacity design
• Resistant to abrasion and cuts
• Oil resistant

Reference Standards / Approvals

• UL AWM Style 20236
• CSA AWM IA/B; IIA/B FT 1
• UL File No. E63634
• Use on cable chains: please pay attention to the assembly guidelines in Appendix T3.

Product composition

• Conductor of copper tarnished with fine thread or extra fine thread
• Conductor isolation: polypropylene (PP)
• Conductors (or pairs of conductors) braided into layers or bundles
• For additional information, see the datasheet
• Nonwoven envelope
• Polyurethane cover (PUR), green (RAL 6018)

ETS Classification 5

• ETIM 5.0 Class-ID: EC000104
• ETIM 5.0 Class Description: Control Cable

ETTIM Rating 6

• ETIM 6.0 Class-ID: EC000104
• ETIM 6.0 Class-Description: Control Line

Driver Identification Code

• See the details in the ÖLFLEX® SERVO FD 798 CP data sheet

Driver training

• Thin yarn or braided extra-thin yarn

Minimum radius of curvature

• Flexible: from 7.5 x outside diameter
• Fixed installation: 4 x outside diameter

Nominal voltage

• IEC: 30 V
• UL & CSA: 30 V

Test voltage

• Conductor/conductor: 1500 V rms
• Driver/display: 750 V rms

Temperature range

• Flexible use: -40°C to +90°C (UL/CSA: +80°C)
• Fixed installation: -50°C to +90°C (UL/CSA: +80°C)

Continuous bending cycles

• See the selection table A2-1 in the annex to our online catalogue