0031060 LAPP UNITRONIC 100 CY 52x0,34

Scope of use

• These control and signal cables are used for milliamperage ranges in computer systems, electronic control equipment, office equipment, scales, etc. and where cables of minimum dimensions are needed.

Product features

• Strong, flexible and resistant outer cover.
• Reduced outer diameter despite the large number of conductors.
• Cable similar to UNITRONIC® 100 but with tinned copper braid screen.
• Non-flame propagator, according to IEC 60332-1-2
• From 3 conductors with protective conductor (green/yellow)
  2 conductors (black/blue)

Reference Standards / Approvals

• Based on: VDE 0814 or VDE 0812

Product composition

• Braiding of fine/multi-thread filaments (0.34 mm²) of bare copper threads
• Conductor insulation made of PVC
• PVC inner cover
• For the nominal section of 0.14 mm², a polyester tape is used under the screen instead of the inner cover.
• Tinned copper braid screen
• Outer cover made of PVC
  Outer shell color: grey (RAL 7001)

ETS Classification 5

• ETIM 5.0 Class-ID: EC000104
• ETIM 5.0 Class Description: Control Cable

ETTIM Rating 6

• ETIM 6.0 Class-ID: EC000104
• ETIM 6.0 Class-Description: Control Line

Driver Identification Code

• UNITRONIC® color code (Appendix T7)

Mutual capacity

• Approx. 120 nF/km

Inductance

• Approx 0.7 mH/km

Driver training

• Braiding, fine thread
  0.34 mm²: 7 threads

Minimum radius of curvature

• Occasional flexible use: 20 x outside diameter
• Fixed installation: 6 x outer diameter

Protective conductor

• Yellow/Green

Temperature range

• Occasional flexible use: –5°C to +70°C
• Fixed installation: -40°C to +80°C