0023398 LAPP ÖLFLEX SOLAR XLS-R 1X10 WH/BK-BU

Benefits

• Reduced outer diameters enable space and weight saving installation
• Robust against mechanical impacts
• Reduction of flame propagation and of toxic combustion gases in the event of fire
• Extruded colour stripe serves as reverse polarity protection during installation.
• Exact quantity control during installation by meter marking on the cable sheath

Application range

• For the cabling between the solar modules and as extension cable between the module strings and the DC/AC inverter
• Flexible or building-integrated PV systems
• Underground use inside protection conduits/ ducts for burial in combined case of (1) secure dissipation of water(logging) from outer cable surface, as well as (2) laying of conduit/ duct in professionally built cable trench with at least 50 cm of back-fill soil (70 cm underneath roads), above indicating tape, above covering plastic slab, above at least 10 cm of covering sand layer, above the conduit/ duct laid on at least 10 cm high sand bed layer (cf.: VDE 0891-6, Section 4.2)
• Not suitable for direct burial, Installation according to IEC 60364-5-52, respectively HD 60364-5-52
• Long-term permanent storage/ operation in water not permitted

Product features

• Weather/UV-resistant acc. to HD 605/A1
• Ozone-resistant according to EN 50396
• Halogen-free and flame-retardant
• Good notch and abrasion resistance
• XLS-R = X-Linked Standard - Reduced
  Proven electron beam cross-linked quality

Product Make-up

• Fine-wire, tinned-copper conductor
• Core insulation made of electron beam cross-linked copolymer
• Colour of core insulation: white
• Outer sheath made of electron beam cross-linked copolymer
• Outer sheath colour: black respectively black with red or blue stripe

Classification ETIM 5

• ETIM 5.0 Class-ID: EC001578
• ETIM 5.0 Class-Description: Flexible cable

Conductor stranding

• Fine wire according to VDE 0295,
  class 5/IEC 60228 class 5

Minimum bending radius

• Fixed installation: 4 x outer diameter

Nominal voltage

• AC U0/U : 600/1000 V
  DC U0/U : 900/1500 V
  Max. permissible operating voltage:
  DC 1,8 kV (Conductor-conductor, non earthed system)

Test voltage

• AC 6500 V

Temperature range

• Fixed installation: -40°C to +100°C max. conductor temperature