PHOENIX CONTACT  IB IL 24/230 DOR1/W-PC-PAC 2862178 - Image 1

Images are for illustrative purposes only. Please refer to data sheet for details.

IB IL 24/230 DOR1/W-PC-PAC 2862178 PHOENIX CONTACT Inline terminal

Reference: IB IL 24/230 DOR1/W-PC-PAC

Code: 2862178

Manufacturer: PHOENIX CONTACT

Description:

Inline terminal
Inline, Relay module, Relay output: 1 (potential-free contacts), 24 V DC, 230 V AC, for switching inductive and capacitive loads, transmission speed on the local bus: 500 kBit/s, protection index: IP20, including Inline connector and marking surface

Categories:

  • PHOENIX CONTACT > I/O

Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX CONTACT

  • More Info
  • PDF
  • Reviews
Guarantee, repair and return.

* This article may be obsolete. Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

LAST VIEWED

MORE INFO

Key Commercial Data

Orderkey2862178
Packing unit1 pc
Catalog pagePage 157 (C-6-2017)
GTIN4017918894665
Weight per Piece (excluding packing)46.000 g
Custom tariff number85389091
Country of originDE (Germany)

Note

Utilization restriction1

Dimensions

Dimensional drawing
Width12.2 mm
Height119.8 mm
Depth71.5 mm
Note on dimensionsHousing dimensions

Ambient conditions

Ambient temperature (operation)-25 °C ... 55 °C
Ambient temperature (storage/transport)-25 °C ... 85 °C
Permissible humidity (operation)10 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)10 % ... 95 % (non-condensing)
Air pressure (operation)70 kPa ... 106 kPa (up to 3000 m above sea level)
Air pressure (storage/transport)70 kPa ... 106 kPa (up to 3000 m above sea level)
Degree of protectionIP20

General

Mounting typeDIN rail
Net weight46 g
Note on weight specificationswith connector
Operating modeProcess data mode with 2 bits

Interfaces

DesignationInline local bus
No. of channels2
Connection methodInline data jumper
Transmission speed500 kbps

Inline potentials

DesignationCommunications power (UL)
Supply voltage7.5 V DC (via voltage jumper)
Current consumptionmax. 60 mA
Power consumptionmax. 0.45 W

Digital outputs

Output nameRelay output
Output descriptionSPDT relay contact
Connection methodSpring-cage connection
Number of outputs1 (floating contacts)
Nominal output voltage24 V DC
230 V AC
Maximum output current per channel2.6 A
Maximum output current per module2.6 A

Relay outputs

Switching currentmax. 2.6 A (At 30 V DC)
max. 0.15 A (for 250 V DC)
Switching capacitymax. 750 VA (see to derating)
Limiting continuous current2.6 A
Contact type1 floating PDT
Switching voltagemax. 253 V AC
max. 250 V DC
Switching currentmax. 2.6 A (At 30 V DC)
max. 0.15 A (for 250 V DC)
Switching capacitymax. 750 VA (see to derating)
Mechanical service life2x 107cycles

Electrical isolation

Test sectionRelay contact / Bus logics 4 kV 50 Hz 1 min.
Contact/contact 1 kV 50 Hz 1 min.
Contact / PE 1 kV 50 Hz 1 min.

Standards and Regulations

Connection in acc. with standardCUL
Protection classI, IEC 61140, EN 61140, VDE 0140-1

Environmental Product Compliance

China RoHSEnvironmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values

Classifications

Latest Customer Reviews

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.