The polyester range of modular enclosures, conforms to IP 65 for single door and IP 54 for double door enclosures. The modular enclosures are a fibre-glass reinforced polyester design with double insulation offering the users maximum safety. Different modular enclosures can be combined together to achieve larger configurations.
Modular moulded, with rear fixing. Direct fixing to the wall or by use of wall mounted brackets, to a pole by use of EPF or to the floor by use of the plinth UPP or DIN-base UAF and UMPS. In single plain door enclosures, sealing is ensured by an EPDM gasket glued against the frame.
Flush mounted door with or without window and 100º opening. For larger sizes a door support is supplied for easier closing. In double door enclosures, sealing is ensured by an injected one piece polyurethane gasket.
Premounted handle suitable for all types of half cylinder locks (standard depth of 40 mm). Five locking points (three points in 500 mm width enclosures).
-50°C to 70°C in continuous use (peak temperatures up to 150ºC).
Self extinguishing and halogen free. Double isolated according to EN61439-1. Rated insulation voltage Ui=1000V.
Complies with IP 65 | TYPE 4, 4X, 12, 13 for single door enclosures / IP 54 | TYPE 4, 4X, 12, 13 for double door and transparent door enclosures. Impact resistance IK 10 (IK 07 for enclosures with transparent door).
RAL 7035, precoloured raw material.
Enclosure with door, fixing screws for the mounting plate and wall mounting brackets. (Lock cylinder is not included in the delivery).
CE, CSA, GOST and cULus_listed. For further approvals, please contact Eldon`s sales department.
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.