UDP125100N nVent HOFFMAN Wall mounted, 500+750x1000x320

Material:

Fibre-glass reinforced polyester. UDPT viewing area: polycarbonate.

Body:

Modular moulded, with rear fixing. Direct fixing to the wall or by use of wall mounted brackets, to a pole by use of EPF or to the floor by use of the plinth UPP or DIN-base UAF and UMPS. In single plain door enclosures, sealing is ensured by an EPDM gasket glued against the frame.

Door:

Flush mounted door with or without window and 100º opening. For larger sizes a door support is supplied for easier closing. In double door enclosures, sealing is ensured by an injected one piece polyurethane gasket.

Lock:

Premounted handle suitable for all types of half cylinder locks (standard depth of 40 mm). Five locking points (three points in 500 mm width enclosures).

Temperature resistance:

-50°C to 70°C in continuous use (peak temperatures up to 150ºC).

Characteristics:

Self extinguishing and halogen free. Double isolated according to EN61439-1. Rated insulation voltage Ui=1000V.

Protection:

Complies with IP 65 TYPE 4, 4X, 12, 13 for single door enclosures / IP 54 TYPE 4, 4X, 12, 13 for double door and transparent door enclosures. Impact resistance IK 10 (IK 07 for enclosures with transparent door).

Finish:

RAL 7035, precoloured raw material.

Delivery:

Enclosure with door, fixing screws for the mounting plate and wall mounting brackets. (Lock cylinder is not included in the delivery).

Approvals:

CE, CSA, GOST and cULus_listed. For further approvals, please contact nVent HOFFMAN`s sales department.