AFS03021 ELDON Wall mounted, 300x200x155 View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

AFS03021 ELDON Wall mounted, 300x200x155





Ship on today

Wall mounted, 300x200x155

More details

Control Cabinets Switch Boxes Distribution Enclosures

Wall Mounting Enclosures - ELDON

Stainless steel, single door, integrated rainhood. AFS - ELDON

* Brand new produt in its original packing covered by the warranties and certifications provided by ELDON

*This price is per unit and is the net value (not including taxes if applicable).

Related products

More info

The Eldon AFS finely pre-grained finish and a design intended to eliminate microbiological traps, combines to provide the ultimate enclosure for environments where the hygienic requirements are strict. An integral sloping roof offers additional protection and leads to self-draining of liquids. The AFS range is the ideal solution for food and beverage industries, biotechnical laboratories and pharmaceutical plants.

NoteWith mounting plate
Height300 mm
Width200 mm
Depth155 mm
Mounting Plate
275 mm
Mounting Plate
150 mm
Max. enclosure
useful depth
No Locks1
Usable depth135
Degree of slope20°
Part No. AISI 304AFS03021
Part No. AISI 316LAFS03021-316*


AISI 304 / AISI 316L pre-grained stainless steel. Body: 1.5 mm. Door: 1.5 mm / 2 mm for enclosures with a height of 1000 mm or greater. Mounting plate: 2 mm galvanized steel.


The top of the body is equipped with a sloping roof at an angle of between 8 and 20 degrees sloping towards the front, giving a 10 mm overhang to remove any liquids away from the door. Folded and seam welded.


Corner formed in one piece. Surface mounted with 130° opening. Concealed AISI 304 stainless steel hinges with captive pin. Can be mounted to give left or right hand opening (Machining is required). Sealing is ensured by an injected one piece silicone gasket.


Zamak double-bit 3 mm lock with 90° movement. Stainless steel lock and other locks available on request.

Mounting plate:

The mounting plate is marked vertically at 10 mm intervals for easy horizontal positioning of equipment. On the top and bottom there are holes to facilitate cable fixing. Fixed onto M8 press welded studs to the rear of the enclosure. All sides from 800 mm and above are strengthened by folded edges. By using the AMG accessory the mounting plate position can be adjusted to any depth.

Cable access:

No gland openings as standard.


Corresponds with IP 66 | TYPE 4X, 12, 13 | IK 10.


240s pre grained stainless steel (average 0.5 micron).


Enclosure with door, mounting plate, metallic key and mounting accessories.

Additional information:

In environments known for quick temperature changes, consideration to condensation should be taken. Please see Eldon`s thermal management section.

Datasheet - PDF

Datasheet 1: AFS03021English516 KbytesDatasheet 1: AFS03021
Complete catalogue 1: AFS03021English4 MbytesDatasheet 1: AFS03021

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
  Add review