AvailableShip on today
Floor standing, 2000x800x600
Control Cabinets Switch Boxes Distribution Enclosures
Floor Standing Enclosures - ELDON
Stainless Steel, combinable version, single door. MCSS - ELDON
* Brand new product in its original packaging covered by the warranties and certifications provided by ELDON
The stainless steel single door floor standing enclosures sets new standards when it comes to strength and ease of use. The sturdy construction of the Eldon MCSS range, with its 1,5 mm thick stainless steel profile frame and 25 mm hole pattern in all directions, provides high corrosion resistance and rigidity. Intended for harsh environments, can be used as a stand alone system or suited together by the use of baying brackets.
|Mounting Plate |
|Mounting Plate |
|Part No. AISI 304||MCSS20086|
|Part No. AISI 316L||MCSS20086-316*|
AISI 304 pre-grained stainless steel / AISI 316L. Frame: 1.5 mm. Door: 2 mm. Rear, roof and side panels: 1.5 mm. Bottom plates: 1.5 mm stainless steel. Mounting plate: 3 mm galvanized steel.
Seam welded reversed open profiles with 25 mm hole pattern according to DIN 43660.
Mounted with four hinges allowing left or right hand opening. Including door frame with 25 mm hole pattern.
Fitted by M6 torx screws. Standard facilities for rear door mounting.
Supplied as an accessory.
Espagnolette 4-point locking system. Does not interfere with the enclosure inner space. Standard double-bit 3 mm insert. Can be exchanged for standard inserts or Euro-cylinder and swing handle.
One piece bottom plate with injected polyurethane gasket to ensure maximum sealing.
Double folded and slides into position. Adjustable in depth by steps of 25 mm with the MPD02 accessory. Mounting plate is delivered attached on the outside of the enclosure packaging.
All panels are earthed through their fittings and are equipped with a separate earthing stud.
240s pre-grained stainless steel (0,5 microns average).
Corresponds with IP 56 | TYPE 4X, 12, 13 | IK 10.
Standard delivery ready for combined installation. For stand-alone installation add side panels.
Frame with fitted door, rear panel, roof panel, bottom plate, mounting plate and door frame. Delivery also includes earthing bolts. Delivered on a pallet which is identical to the width of the enclosure to allow suiting without removal. All packing material is recyclable.
|Datasheet 1: MCSS20086||English||621 Kbytes|
|Complete catalogue 1: MCSS20086||English||9 Mbytes|