The MPG simple but effective one-piece console is available in five sizes. The top desk panel is held open by a self-engage/self-release mechanical panel stay and combines with the removable rear panel and front door, to ensure convenient access. A range of 19" accessories adds further versatility.
Mounting Plate Height
Mounting Plate Width
Max. enclosure useful depth
Body and door: 1.5 mm mild steel. Rear panel. 1.5 mm mild steel. Bottom plates: 1.2 mm galvanized steel. Mounting plate: 2.5 mm galvanized steel.
Folded and seam welded. Console construction counts with a base that provides a distance between the floor and the lower part of the door/s acting as an integrated plinth.
Doors and panels:
Single folded surface mounted with hinges allowing left and right-hand opening to base door. Angle 12° from horizontal. Concealed hinges on top edge allow 90° opening. Panel held open by self engage/self release mechanical panel stay. Double door on 1200 and 1600 mm wide base units.
Standard mounting plate in base unit.
Double-bit 3 mm locks for top panel. For base, two double-bit 3 mm locks. Other options available. See wall mounting section.
Bottom opening for cable access. Bottom plates for cable glanding supplied as standard.
M8 threaded studs on body, door, top panel and rear panel.
RAL 7035 structured powder coating.
Single door: IP 66 | TYPE 4, 12, 13 | IK 10. Double door: IP 55 | TYPE 12, 13 | IK 10.
Mounting plate and suitable nuts and washers for earthing. The console is delivered on a wooden pallet.