Product range | Control switches | ||
Part group reference | T0 | ||
Basic function | Changeoverswitches | ||
| with black thumb grip and front plate | |||
Contacts | 2 | ||
Degree of Protection | Front IP65 | ||
Design | flush mounting | ||
| General | |||
Standards | IEC/EN 60947, VDE 0660, IEC/EN 60204, CSA, UL Switch-disconnector according to IEC/EN 60947-3 | ||
Climatic proofing | Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30 | ||
Ambient temperature | |||
Open | °C | -25 - +50 | |
Enclosed | °C | -25 - +40 | |
Overvoltage category/pollution degree | III/3 | ||
Rated impulse withstand voltage | Uimp | V AC | 6000 |
Mechanical shock resistance | g | 15 | |
Mounting position | As required | ||
Protection against direct contact when actuated from front (EN 50274) | Finger and back-of-hand proof | ||
| Contacts | |||
Electrical characteristics | |||
Rated operational voltage | Ue | V AC | 690 |
Rated uninterrupted current | Iu | A | 20 |
Note on rated uninterrupted current !u | Rated uninterrupted current Iu is specified for max. cross-section. | ||
Load rating with intermittent operation, class 12 | |||
AB 25 % DF | x Ie | 2 | |
AB 40 % DF | x Ie | 1.6 | |
AB 60 % DF | x Ie | 1.3 | |
Short-circuit rating | |||
Fuse | A gG/gL | 20 | |
Rated short-time withstand current (1 s current) | Icw | Arms | 320 |
Note on rated short-time withstand current lcw | Current for a time of 1 second | ||
Rated conditional short-circuit current | Iq | kA | 6 |
| Switching capacity | |||
cos ϕ rated making capacity as per IEC 60947-3 | A | 130 | |
Rated breaking capacity cos ϕ to IEC 60947-3 | A | ||
230 V | A | 100 | |
400/415 V | A | 110 | |
500 V | A | 80 | |
690 V | A | 60 | |
Safe isolation to EN 61140 | |||
between the contacts | V AC | 440 | |
Current heat loss per contact at Ie | W | 0.6 | |
Current heat loss per auxiliary circuit at Ie (AC-15/230 V) | CO | 0.6 | |
Lifespan, mechanical | Operations | x 106 | > 0.4 |
Maximum operating frequency | Operations/h | 1200 | |
AC | |||
AC-3 | |||
Rating, motor load switch | P | kW | |
220 V 230 V | P | kW | 3 |
230 V Star-delta | P | kW | 5.5 |
400 V 415 V | P | kW | 5.5 |
400 V Star-delta | P | kW | 7.5 |
500 V | P | kW | 5.5 |
500 V Star-delta | P | kW | 7.5 |
690 V | P | kW | 4 |
690 V Star-delta | P | kW | 5.5 |
Rated operational current motor load switch | |||
230 V | Ie | A | 11.5 |
230 V star-delta | Ie | A | 20 |
400V 415 V | Ie | A | 11.5 |
400 V star-delta | Ie | A | 20 |
500 V | Ie | A | 9 |
500 V star-delta | Ie | A | 15.6 |
690 V | Ie | A | 4.9 |
690 V star-delta | Ie | A | 8.5 |
AC-21A | |||
Rated operational current switch | |||
440 V | Ie | A | 20 |
AC-23A | |||
Motor rating AC-23A, 50 - 60 Hz | P | kW | |
230 V | P | kW | 3 |
400 V 415 V | P | kW | 5.5 |
500 V | P | kW | 7.5 |
690 V | P | kW | 5.5 |
Rated operational current motor load switch | |||
230 V | Ie | A | 13.3 |
400 V 415 V | Ie | A | 13.3 |
500 V | Ie | A | 13.3 |
690 V | Ie | A | 7.6 |
DC | |||
DC-1, Load-break switches L/R = 1 ms | |||
Rated operational current | Ie | A | 10 |
Voltage per contact pair in series | V | 60 | |
DC-21A | Ie | A | |
Rated operational current | Ie | A | 1 |
Contacts | Quantity | 1 | |
DC-23A, motor load switchL/R = 15 ms | |||
24 V | |||
Rated operational current | Ie | A | 10 |
Contacts | Quantity | 1 | |
48 V | |||
Rated operational current | Ie | A | 10 |
Contacts | Quantity | 2 | |
60 V | |||
Rated operational current | Ie | A | 10 |
Contacts | Quantity | 3 | |
120 V | |||
Rated operational current | Ie | A | 5 |
Contacts | Quantity | 3 | |
240 V | |||
Rated operational current | Ie | A | 5 |
Contacts | Quantity | 5 | |
DC-13, Control switches L/R = 50 ms | |||
Rated operational current | Ie | A | 10 |
Voltage per contact pair in series | V | 32 | |
Control circuit reliability at 24 V DC, 10 mA | Fault probability | HF | < 10 -5, < 1 fault in 100000 operations |
| Terminal capacities | |||
Solid or stranded | mm2 | 1 x (1 - 2,5) 2 x (1 - 2,5) | |
Flexible with ferrules to DIN 46228 | mm2 | 1 x (0.75 - 2.5) 2 x (0.75 - 2.5) | |
Terminal screw | M3.5 | ||
Max. tightening torque | Nm | 1 | |
| Technical safety parameters: | |||
Notes | B10d values as per EN ISO 13849-1, table C1 | ||
Cart
0
Product
Products
(empty)
No products
To be determined
Shipping
$0.00
Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart.
There is 1 item in your cart.
Total products
Total shipping
To be determined
Total
View larger
T0-1-8295/E 009734 EATON MOELLER Changeoverswitches, Contacts: 2, 20 A, front plate: 1 2, 45 °, momentary, f..
T0-1-8295/E
009734
EATON - MOELLER
Available
Ship on today
Changeoverswitches, Contacts: 2, 20 A, front plate: 1<2, 45 °, momentary, flush mounting
Switches
Step switches - EATON - MOELLER
* Brand new product in its original packaging covered by the warranties and certifications provided by EATON - MOELLER
Related products
▲More info
▲Delivery programme
Design verification as per IEC/EN 61439(Show features)(Hide features)
Technical data for design verification | |||
Rated operational current for specified heat dissipation | In | A | 20 |
Heat dissipation per pole, current-dependent | Pvid | W | 0.6 |
Equipment heat dissipation, current-dependent | Pvid | W | 0 |
Static heat dissipation, non-current-dependent | Pvs | W | 0 |
Heat dissipation capacity | Pdiss | W | 0 |
Operating ambient temperature min. | °C | -25 | |
Operating ambient temperature max. | °C | 50 | |
IEC/EN 61439 design verification | |||
10.2 Strength of materials and parts | |||
10.2.2 Corrosion resistance | Meets the product standard's requirements. | ||
10.2.3.1 Verification of thermal stability of enclosures | Meets the product standard's requirements. | ||
10.2.3.2 Verification of resistance of insulating materials to normal heat | Meets the product standard's requirements. | ||
10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects | Meets the product standard's requirements. | ||
10.2.4 Resistance to ultra-violet (UV) radiation | Please enquire | ||
10.2.5 Lifting | Does not apply, since the entire switchgear needs to be evaluated. | ||
10.2.6 Mechanical impact | Does not apply, since the entire switchgear needs to be evaluated. | ||
10.2.7 Inscriptions | Meets the product standard's requirements. | ||
10.3 Degree of protection of ASSEMBLIES | Does not apply, since the entire switchgear needs to be evaluated. | ||
10.4 Clearances and creepage distances | Meets the product standard's requirements. | ||
10.5 Protection against electric shock | Does not apply, since the entire switchgear needs to be evaluated. | ||
10.6 Incorporation of switching devices and components | Does not apply, since the entire switchgear needs to be evaluated. | ||
10.7 Internal electrical circuits and connections | Is the panel builder's responsibility. | ||
10.8 Connections for external conductors | Is the panel builder's responsibility. | ||
10.9 Insulation properties | |||
10.9.2 Power-frequency electric strength | Is the panel builder's responsibility. | ||
10.9.3 Impulse withstand voltage | Is the panel builder's responsibility. | ||
10.9.4 Testing of enclosures made of insulating material | Is the panel builder's responsibility. | ||
10.10 Temperature rise | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. | ||
10.11 Short-circuit rating | Is the panel builder's responsibility. The specifications for the switchgear must be observed. | ||
10.12 Electromagnetic compatibility | Is the panel builder's responsibility. The specifications for the switchgear must be observed. | ||
10.13 Mechanical function | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
Technical data ETIM 6.0(Show features)(Hide features)
| Low-voltage industrial components (EG000017) / Control switch (EC002611) | |||
| Electric engineering, automation, process control engineering / Low-voltage switch technology / Off-load switch, circuit breaker, control switch / Control switch ([email protected] [ACN998008]) | |||
Type of switch | Reverser | ||
Number of poles | 1 | ||
Max. rated operation voltage Ue AC | V | 690 | |
Rated permanent current Iu | A | 20 | |
Number of switch positions | 2 | ||
With 0 (off) position | No | ||
With retraction in 0-position | No | ||
Device construction | Built-in device | ||
Width in number of modular spacings | 0 | ||
Suitable for ground mounting | No | ||
Suitable for front mounting 4-hole | Yes | ||
Suitable for distribution board installation | No | ||
Suitable for intermediate mounting | No | ||
Complete device in housing | No | ||
Type of control element | Toggle | ||
Front shield size | 48x48 mm | ||
Degree of protection (IP), front side | IP65 | ||
Approvals
| Product Standards | UL 508; CSA-C22.2 No. 14-05; CSA-C22.2 No. 94; IEC/EN 60947-3; CE marking | ||
| UL File No. | E36332 | ||
| UL Category Control No. | NLRV | ||
| CSA File No. | 12528 | ||
| CSA Class No. | 3211-05 | ||
| North America Certification | UL listed, CSA certified | ||
| Specially designed for North America | Yes, in combination with +NA (105864) | ||
| Degree of Protection | IEC: IP65; UL/CSA Type 1, 12 |
Datasheet - PDF
▲| Title: | Language: | Size: | Type: |
|---|---|---|---|
| pdf- Changeoverswitches, Contacts: 2, 20 A, front plate: 1lt2, 45 °, momentary, flush mo - EATON - T0-1-8295/ | English | 258 Kbytes |
 |
Reviews (0) ▲
No customer reviews for the moment.
Add Review
hide form
| Rating: |
|
| Name: | |
| Email: | |
| Subject: | |
| Text: | |
| Do you recommend this product to buy? | |
|
|
|
| Add review | |
Últimas Opiniones de Nuestros Clientes
Todas las valoraciones que recibimos de los artículos que ofrecemos son reales y están verificadas. Un pequeño gesto, pero de mucho valor. Por eso, te agradecemos ese minuto que inviertes en dejarnos tu opinión y calificación sobre los productos, porque nos ayuda a seguir mejorando y a ofrecerte un servicio de todavía mayor calidad.
