Cart
0
Product
Products
(empty)
No products
$0.00
Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart.
There is 1 item in your cart.
Total products
Total
View larger
PBHT-80/4/1 248834 XTPAXFA11 EATON ELECTRIC Residual-current circuit breaker trip block for PLHT, 80A, 4 p, ..
PBHT-80/4/1
248834
XTPAXFA11
EATON-MOELLER
Residual-current circuit breaker trip block for PLHT, 80A, 4 p, 1000mA, type AC
PBHT-80/4/1
Attachable residual current circuit-breaker unit, Add-on residual current protection unit, 4 pole, For commercial and industry applications, Rated current In 80 A, Rated short-circuit strength Icn same as connected PLHT kA, Rated fault current IΔN 1 A, Type AC, Tripping non-delayed s…, AC current sensitive, Partly surge-proof 250 A
Circuit breakers and fuses > Residual current circuit breaker (RCCB) module
Modular Switchgear – Industrial
Brand new product in its original packaging covered by the warranties and certifications provided by EATON-MOELLER
Best sellers
▲More info
▲Residual-current circuit breaker trip block for PLHT, 80A, 4 p, 1000mA, type AC
Attachable residual current circuit-breaker unit, Add-on residual current protection unit, 4 pole, For commercial and industry applications, Rated current In 80 A, Rated short-circuit strength Icn same as connected PLHT kA, Rated fault current IΔN 1 A, Type AC, Tripping non-delayed s…, AC current sensitive, Partly surge-proof 250 A
Delivery program
Basic function
Add-on residual current protection unit
Number of poles
4 pole
Application
For commercial and industry applications
Rated current [In]
80 A
Rated short-circuit strength [Icn]
same as connected PLHT kA
Rated fault current [IΔN]
1 A
Type
Type AC
Tripping
non-delayed s…
Product range
PBHT
Sensitivity
AC current sensitive
Impulse withstand current
Partly surge-proof 250 A
Technical data
Electrical
Types conform to
IEC/EN 60947-2
Rated frequency [f]
50 Hz
Sensitivity
AC current sensitive
Rated current [In]
80 A
Rated impulse withstand voltage [Uimp]
4 kV
lifespanElectrical [Operations]
≧ 1500
lifespanMechanical [Operations]
≧ 10000
Mechanical
Standard front dimension
45 mm
Device height
90 mm
Built-in width
95 (5.5TE) mm
Mounting
screwed onto PLHT
Degree of Protection
IP20, IP40 with suitable enclosure
Terminals top and bottom
Lift terminals
Terminal protection
DGUV VS3, EN 50274
Permissible storage and transport temperatures
-35 - +60 °C
Climatic proofing
25-55°C/90-95% relative humidity according to IEC 60068-2
Design verification as per IEC/EN 61439
Technical data for design verification
Rated operational current for specified heat dissipation [In]
80 A
Heat dissipation per pole, current-dependent [Pvid]
0 W
Equipment heat dissipation, current-dependent [Pvid]
7 W
Static heat dissipation, non-current-dependent [Pvs]
0 W
Heat dissipation capacity [Pdiss]
0 W
Operating ambient temperature min.
-25 °C
Operating ambient temperature max.
+40 °C
Starting at 40 °C, the max. permissible continuous current decreases by 3% for every 1 °C
IEC/EN 61439 design verification
10.2 Strength of materials and parts10.2.2 Corrosion resistance
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.4 Resistance to ultra-violet (UV) radiation
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.5 Lifting
Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts10.2.6 Mechanical impact
Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts10.2.7 Inscriptions
Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES
Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances
Meets the product standard's requirements.
10.5 Protection against electric shock
Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components
Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections
Is the panel builder's responsibility.
10.8 Connections for external conductors
Is the panel builder's responsibility.
10.9 Insulation properties10.9.2 Power-frequency electric strength
Is the panel builder's responsibility.
10.9 Insulation properties10.9.3 Impulse withstand voltage
Is the panel builder's responsibility.
10.9 Insulation properties10.9.4 Testing of enclosures made of insulating material
Is the panel builder's responsibility.
10.10 Temperature rise
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Technical data ETIM 7.0
Circuit breakers and fuses (EG000020) / Residual current circuit breaker (RCCB) (EC000003)
Electric engineering, automation, process control engineering / Electrical installation, device / Residual current protection system / Residual current circuit breaker (RCCB) ([email protected] [AAB906014])
Number of poles
4
Rated voltage
400 V
Rated current
80 A
Rated fault current
1000 mA
Rated insulation voltage Ui
440 V
Rated impulse withstand voltage Uimp
4 kV
Mounting method
DIN rail
Leakage current type
AC
Selective protection
No
Short-time delayed tripping
No
Short-circuit breaking capacity (Icw)
0 kA
Surge current capacity
0.25 kA
Frequency
50 Hz
Additional equipment possible
Yes
With interlocking device
Yes
Degree of protection (IP)
IP20
Width in number of modular spacings
5.5
Built-in depth
70 mm
Ambient temperature during operating
-25 - 40 °C
Pollution degree
2
Connectable conductor cross section multi-wired
2.5 - 50 mm²
Connectable conductor cross section solid-core
2.5 - 50 mm²
| Feature Name | Feature Value |
|---|---|
| Nominal voltage (EF005127) | 240 V |
| Nominal current (EF000001) | 80 A |
| Rated fault current adjustable (EF008874) | false |
| Rated fault current (EF003975) | 1 A |
| Max. delay time (EF001421) | 0 ms |
| Delay adjustable (EF001420) | false |
| Number of poles (EF001391) | 4 |
| Leakage current type (EF002560) | AC |
| Surge current capacity (EF002564) | 0.25 kA |
| Frequency (EF005455) | 50 Hz |
| Rated insulation voltage Ui (EF001366) | 440 V |
| Rated impulse withstand voltage Uimp (EF011980) | 4 kV |
| Power loss (EF005387) | None W |
| Connectable conductor cross section solid-core (EF007337) | 2.5 mm² |
| Connectable conductor cross section multi-wired (EF007343) | 2.5 mm² |
| Anti-nuisance tripping version (EF009497) | false |
| With interlocking device (EF007385) | true |
| Degree of protection (IP) (EF005474) | IP20 |
| Pollution degree (EF002570) | 2 |
| Ambient temperature during operating (EF007515) | -25 °C |
Datasheet - PDF
▲| Title: | Size: | Type: |
|---|---|---|
| PDF EATON XEFFECT SWITCHGEAR RANGE EN.pdf | 8 Mbytes |
|
| PDF CATALOGUE EATON EN .pdf | 38 Mbytes |
|
| PBHT-80/4/1 XTPAXFA11 248834 EN_248834.pdf | 167 Kbytes |
|
Reviews (0) ▲
No customer reviews for the moment.
Add Review
hide form
| Rating: |
|
| Name: | |
| Email: | |
| Subject: | |
| Text: | |
| Do you recommend this product to buy? | |
|
|
|
| Add review | |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.