> EATON - MOELLER>Modular Switchgear – Industrial >PFDM-125/2/03-A 249037 PBSM-402/03-S/A-MW ELECTRIC Residual-current circuit breaker trip block for PLS..
Previous Product Next Product

PFDM-125/2/03-A 249037 PBSM-402/03-S/A-MW EATON ELECTRIC Residual-current circuit breaker trip block for PLS..

PFDM-125/2/03-A

249037

PBSM-402/03-S/A-MW

EATON-MOELLER

Residual-current circuit breaker trip block for PLS. 40A, 2 p, 300mA, type S/A

Residual current circuit-breaker: 125A rated operational current, 2-Pole, 300mA, partly surge-proof according to ring wave test, 2SU, : for fault and additional protection selective types auxiliary contact

More details


Circuit breakers and fuses > Residual current circuit breaker (RCCB)

Modular Switchgear – Industrial

Brand new product in its original packaging covered by the warranties and certifications provided by EATON-MOELLER

* This article may be obsolete. Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

If our price is not the best, please ask us for a quote. Ask for a quotation

Best sellers

▲

More info

▲


Residual-current circuit breaker trip block for PLS. 40A, 2 p, 300mA, type S/A
Alternate Catalog No.
PBSM-402/03-S/A-MW
[

Delivery program

Basic function
Add-on residual current protection unit
Number of poles
2 pole
Rated current [In]
40 A
Rated short-circuit strength [Icn]
same as connected PLS kA
Rated fault current [IΔN]
0.3 A
Type
Type S/A
Tripping
selective switch off s…
Product range
PBSM
Impulse withstand current
surge-proof 5 kA
,

Technical data

Electrical
Rated frequency [f]
50 Hz
Rated current [In]
40 A
lifespanElectrical [Operations]
≧ 4000
lifespanMechanical [Operations]
≧ 20000
Mechanical
Mounting
DIN rail
Degree of Protection
IP20
Thickness of busbar material
0.8 - 2 mm
Climatic proofing
25-55°C/90-95% relative humidity according to IEC 60068-2
,

Design verification as per IEC/EN 61439

Technical data for design verification
Rated operational current for specified heat dissipation [In]
40 A
Heat dissipation per pole, current-dependent [Pvid]
0 W
Equipment heat dissipation, current-dependent [Pvid]
13 W
Static heat dissipation, non-current-dependent [Pvs]
0 W
Heat dissipation capacity [Pdiss]
0 W
Operating ambient temperature min.
-25 °C
Operating ambient temperature max.
+40 °C
Starting at 40 °C, the max. permissible continuous current decreases by 3% for every 1 °C
IEC/EN 61439 design verification
10.2 Strength of materials and parts10.2.2 Corrosion resistance
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.4 Resistance to ultra-violet (UV) radiation
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.5 Lifting
Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts10.2.6 Mechanical impact
Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts10.2.7 Inscriptions
Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES
Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances
Meets the product standard's requirements.
10.5 Protection against electric shock
Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components
Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections
Is the panel builder's responsibility.
10.8 Connections for external conductors
Is the panel builder's responsibility.
10.9 Insulation properties10.9.2 Power-frequency electric strength
Is the panel builder's responsibility.
10.9 Insulation properties10.9.3 Impulse withstand voltage
Is the panel builder's responsibility.
10.9 Insulation properties10.9.4 Testing of enclosures made of insulating material
Is the panel builder's responsibility.
10.10 Temperature rise
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
,

Technical data ETIM 7.0

Circuit breakers and fuses (EG000020) / Residual current circuit breaker (RCCB) (EC000003)
Electric engineering, automation, process control engineering / Electrical installation, device / Residual current protection system / Residual current circuit breaker (RCCB) ([email protected] [AAB906014])
Number of poles
2
Rated voltage
230 V
Rated current
40 A
Rated fault current
300 mA
Rated insulation voltage Ui
V
Rated impulse withstand voltage Uimp
kV
Mounting method
DIN rail
Leakage current type
A
Selective protection
Yes
Short-time delayed tripping
No
Short-circuit breaking capacity (Icw)
0 kA
Surge current capacity
5 kA
Frequency
50 Hz
Additional equipment possible
Yes
With interlocking device
Degree of protection (IP)
IP20
Width in number of modular spacings
4
Built-in depth
70 mm
Ambient temperature during operating
°C
Pollution degree
Connectable conductor cross section multi-wired
mm²
Connectable conductor cross section solid-core
mm²
]

ETIM for 249037 Circuit breakers and fuses (EC000003)
Feature Name Feature Value
Selective protection (EF002561) No
Short-time delayed tripping (EF003604) No
With interlocking device (EF007385) No
Additional equipment possible (EF008148) No
Explosion-proof (EF004663) No

Datasheet - PDF

▲
Title: Size: Type:
PDF EATON XEFFECT SWITCHGEAR RANGE EN.pdf 8 Mbytes
PDF CATALOGUE EATON EN .pdf 38 Mbytes
PFDM-125/2/03-A PBSM-402/03-S/A-MW 249037 249037_EN.pdf 158 Kbytes PFDM-125/2/03-A PBSM-402/03-S/A-MW 249037 249037_EN.pdf

Reviews (0) ▲

No customer reviews for the moment.

Add Review
Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
Do you recommend this product to buy?
  Captcha
  Add review

Latest Customer Reviews

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.

Newsletter
Follow us
My account