> EATON - MOELLER>Auxiliary Control and Signalling Elements >111LQ18 088813 ELECTRIC Insert label, transparent, START
Previous Product Next Product
111LQ18 088813 EATON ELECTRIC Insert label, transparent, START View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

111LQ18 088813 EATON ELECTRIC Insert label, transparent, START

111LQ18

088813

EATON-MOELLER

20

Insert label, transparent, START

Indicator plate. Transparent. Registration: START. For RMQ16 18x18

Practical transparent insert plate with printed text, ready for use on RMQ16 illuminated pushbuttons and flat indicator lights with front dimensions 18x18 mm

More details


Low-voltage industrial components > Hood/lens for circuit control devices

Auxiliary Control and Signalling Elements

Brand new product in its original packaging covered by the warranties and certifications provided by EATON-MOELLER

* This article may be obsolete. Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

If our price is not the best, please ask us for a quote. Ask for a quotation

Best sellers

▲

More info

▲


Insert label, transparent, START
Practical transparent insert plate with printed text, ready for use on RMQ16 illuminated pushbuttons and flat indicator lights with front dimensions 18x18 mm

Delivery program

Product range
Accessories
Basic function accessories
Transparent insert plates
Single unit/Complete unit
Single unit
Inscription
START
Colour
116C075
Front dimensions
18 x 18
Connection to SmartWire-DT
no

Design verification as per IEC/EN 61439

Technical data for design verification
Rated operational current for specified heat dissipation [In]
0 A
Heat dissipation per pole, current-dependent [Pvid]
0 W
Equipment heat dissipation, current-dependent [Pvid]
0 W
Static heat dissipation, non-current-dependent [Pvs]
0 W
Heat dissipation capacity [Pdiss]
0 W
Operating ambient temperature min.
-25 °C
Operating ambient temperature max.
+60 °C
IEC/EN 61439 design verification
10.2 Strength of materials and parts10.2.2 Corrosion resistance
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.4 Resistance to ultra-violet (UV) radiation
Please enquire
10.2 Strength of materials and parts10.2.5 Lifting
Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts10.2.6 Mechanical impact
Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts10.2.7 Inscriptions
Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES
Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances
Meets the product standard's requirements.
10.5 Protection against electric shock
Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components
Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections
Is the panel builder's responsibility.
10.8 Connections for external conductors
Is the panel builder's responsibility.
10.9 Insulation properties10.9.2 Power-frequency electric strength
Is the panel builder's responsibility.
10.9 Insulation properties10.9.3 Impulse withstand voltage
Is the panel builder's responsibility.
10.9 Insulation properties10.9.4 Testing of enclosures made of insulating material
Is the panel builder's responsibility.
10.10 Temperature rise
Not applicable.
10.11 Short-circuit rating
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.

Technical data ETIM 7.0

Low-voltage industrial components (EG000017) / Hood/lens for circuit control devices (EC001072)
Electric engineering, automation, process control engineering / Low-voltage switch technology / Command and alarm device / Dome, refractor ([email protected] [AKF049014])
Colour lens
Other
Lens shape
Square
Construction type
Flat
Labelled
Yes
Built-in diameter
16 mm
Diameter
0 mm
Width
18 mm
Height
18 mm

ETIM for 088813 Low-voltage industrial controls and switchgear (EC001072)
Feature Name Feature Value
Shape of lens (EF001371) Square
Construction type (EF000767) Flat
Labelled (EF001537) Yes
Built-in diameter (EF000943) 16 mm
Diameter (EF000551) 0 mm
Width (EF000008) 14 mm
Height (EF000040) 14 mm

Datasheet - PDF

▲
Title: Size: Type:
PDF EATON COMMAND INDICATION EN.pdf 24 Mbytes
PDF CATALOGUE EATON EN .pdf 38 Mbytes
111LQ18 111LQ18 088813 EN_088813.pdf 135 Kbytes 111LQ18 111LQ18 088813 EN_088813.pdf

Reviews (0) ▲

No customer reviews for the moment.

Add Review
Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
Do you recommend this product to buy?
  Captcha
  Add review

Latest Customer Reviews

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.

Newsletter
Follow us
My account