> EATON - MOELLER>Transformers >+EEB2 226103 Y7-226103 ELECTRIC Inrush current limiter, 1p, Ie 2A. Can only be sold assembled.
Previous Product Next Product
+EEB2 226103 Y7-226103 EATON ELECTRIC Inrush current limiter, 1p, Ie 2A. Can only be sold assembled. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

+EEB2 226103 Y7-226103 EATON ELECTRIC Inrush current limiter, 1p, Ie 2A. Can only be sold assembled.

+EEB2

226103

Y7-226103

EATON-MOELLER

Inrush current limiter, 1p, Ie=2A. Can only be sold assembled.

+EEB2

Inrush current limiter, 1p, Ie=2A

Inrush current limiter for STI-series single-phase transformers, STZ, ET primary current In 2.0 A

More details


Low-voltage industrial components > Current limiter

Transformers

Brand new product in its original packaging covered by the warranties and certifications provided by EATON-MOELLER

* This article may be obsolete. Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

If our price is not the best, please ask us for a quote. Ask for a quotation

Related products

▲

Best sellers

▲

More info

▲


Inrush current limiter, 1p, Ie=2A
Inrush current limiter for STI-series single-phase transformers, STZ, ET primary current In 2.0 A

General specifications
Product name
Eaton Moeller® series EEB Accessory Inrush current limiter
Part no.
+EEB2
EAN
4015082261030
Product Length/Depth
15 millimetre
Product height
50 millimetre
Product width
20 millimetre
Product weight
0.1 kilogram
Compliances
CE
Product Tradename
EEB
Product Type
Accessory
Product Sub Type
Inrush current limiter
General information
Ambient operating temperature - min
-25 °C
Ambient operating temperature - max
40 °C
Product category
Accessories
Electrical rating
Nominal current
2 A
Rated conditional short-circuit current (Iq)
0 kA
Rated uninterrupted current (Iu)
2 A
Design verification
Equipment heat dissipation, current-dependent Pvid
0 W
Heat dissipation capacity Pdiss
0 W
Heat dissipation per pole, current-dependent Pvid
0 W
Rated operational current for specified heat dissipation (In)
0 A
Static heat dissipation, non-current-dependent Pvs
1.8 W
10.2.2 Corrosion resistance
Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard's requirements.
10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects
Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation
Meets the product standard's requirements.
10.2.5 Lifting
Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact
Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions
Meets the product standard's requirements.
10.3 Degree of protection of assemblies
Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances
Meets the product standard's requirements.
10.5 Protection against electric shock
Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components
Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections
Is the panel builder's responsibility.
10.8 Connections for external conductors
Is the panel builder's responsibility.
10.9.2 Power-frequency electric strength
Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage
Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material
Is the panel builder's responsibility.
10.10 Temperature rise
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.

Technical data ETIM 9.0

Low-voltage industrial components (EG000017) / Current limiter (EC000239)
Electric engineering, automation, process control engineering / Low-voltage switch technology / Circuit breaker (LV < 1 kV) / Current limiter (ecl@ss13-27-37-04-16 [AKF014018])
Max. apparent power
0 VA
Mounting method
Direct attachment
Conditioned rated short-circuit current Iq
0 kA
Rated permanent current Iu
2 A
Short-circuit current limiter
No

ETIM for 226103 Low-voltage industrial controls and switchgear (EC000239)
Feature Name Feature Value
Max. apparent power (EF008258) 0 VA
Mounting method (EF000003) Direct attachment
Conditioned rated short-circuit current Iq (EF001444) 0 kA
Rated permanent current Iu (EF001389) 2 A
Short-circuit current limiter (EF007333) No

Datasheet - PDF

▲
Title: Size: Type:
PDF EATON CONTROL TRANSFORMES EN.pdf 4 Mbytes
PDF CATALOGUE EATON EN .pdf 38 Mbytes
+EEB2 Y7-226103 226103 EN_226103.pdf 108 Kbytes +EEB2 Y7-226103 226103 EN_226103.pdf

Reviews (0) ▲

No customer reviews for the moment.

Add Review
Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
Do you recommend this product to buy?
  Captcha
  Add review

Latest Customer Reviews

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.

Newsletter
Follow us
My account