EASY222-DN 233540 EATON MOELLER Bus module, deviceNet, 24 V DC, addressable 0-63 View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

EASY222-DN 233540 EATON MOELLER Bus module, deviceNet, 24 V DC, addressable 0-63





Ship on today

Product on demand only, returns will not be accepted.

Bus module, deviceNet, 24 V DC, addressable 0-63

More details


ES4P easySafety - EATON - MOELLER

easySafety - ES4P - I/O expansions - EATON - MOELLER

* Brand new produt in its original packing covered by the warranties and certifications provided by EATON - MOELLER

1+171,68 €
2+167,38 €
3+165,25 €
4+163,89 €
5+163,68 €
*This price is per unit and is the net value (not including taxes if applicable).

Related products

More info

Delivery programme
Product range
  Control relays easyRelay
Multi-function-display MFD-Titan
  Bus modules
  Bus modules
Basic function
  Can be used through easyLink
Addresses available: 0 - 63
Bus protocol
Supply voltage
  24 V DC
For use with
Technical data
  EN 55011, EN 55022, IEC/EN 61000-4, IEC 62026
Dimensions (W x H x D)
 mm35.5 x 90 x 58 (2 PE)
  Top-hat rail IEC/EN 60715, 35 mm or screw fixing using fixing brackets ZB4-101-GF1 (accessories)
Terminal capacities
 mm20.2/4 (AWG 22 - 12)
Flexible with ferrule
 mm20.2/2.5 (AWG 22 - 12)
Standard screwdriver
 mm3.5 x 0.8
Max. tightening torque
Climatic environmental conditions
Operating ambient temperature
 °C-25 to 55, cold as per IEC 60068-2-1, heat as per IEC 60068-2-2
  Take appropriate measures to prevent condensation
 °C- 40 - 70
Relative humidity, non-condensing (IEC/EN 60068-2-30)
 %5 - 95
Air pressure (operation)
 hPa795 - 1080
Ambient conditions, mechanical
Protection type (IEC/EN 60529, EN50178, VBG 4)
Vibrations (IEC/EN 60068-2-6)
Constant amplitude 0.15 mm
 Hz10 - 57
Constant acceleration 2 g
 Hz57 - 150
Mechanical shock resistance (IEC/EN 60068-2-27) semi-sinusoidal 15 g/11 ms
Drop to IEC/EN 60068-2-31
Drop heightmm50
Free fall, packaged (IEC/EN 60068-2-32)
Mounting position
  Vertical or horizontal
Electromagnetic compatibility (EMC)
Overvoltage category/pollution degree
Electrostatic discharge (IEC/EN 61000-4-2, Level 3, ESD)
Air discharge
Contact discharge
Electromagnetic fields (IEC/EN 61000-4-3, RFI)
V/m 10
Radio interference suppression
  EN 55011 Class B, EN 55022 Class B
Burst Impulse (IEC/EN 61000-4-4, Level 3)
Supply cable
Signal lines
power pulses (surge) (IEC/EN 61000-4-5, level 2)
 kV0.5 (supply cables, symmetrical)
Immunity to line-conducted interference to (IEC/EN 61000-4-6)
Insulation resistance
Clearance in air and creepage distances
  EN 50178, UL 508, CSA C22.2, No. 142
Insulation resistance
  EN 50178
Power supply
Rated operational voltage
UeV24 (-15/+20 %)
Admissible range
 V DC20.4 - 28.8
Residual ripple
max. current consumption (at 24 V DC)
 mANormally 200
Voltage dips
 ms≤ 10
Heat dissipation at 24 V DC
Power supply
Residual ripple
 %< 5
Voltage dips
 ms≤ 10
Protection against polarity reversal
AS-I power supply
  Module Status LED (MS): green
LED display
  LED network status (NS): red/green
Connection technique
  5-pole, pluggable screw terminal
Potential isolation
  Between bus and power supply (simple), between bus and power supply and easy base unit (safe isolation)
  DeviceNet slave
Bus protocol
Baud rates
  Automatic search up to 500 Kbit⁄s
Bus terminating resistors
  Separate, external bus termination required (120 Ω)
Bus addresses
  0 - 63, can be addressed via EASY basic unit with display or via EASY-SOFT
  All data R1 - R16, S1 - S8
  Read/write, real-time, day, summer/winter time, all the parameters of the EASY function relay
Design verification as per IEC/EN 61439(Show features)(Hide features)
Technical data for design verification
Rated operational current for specified heat dissipation
Heat dissipation per pole, current-dependent
Equipment heat dissipation, current-dependent
Static heat dissipation, non-current-dependent
Heat dissipation capacity
Operating ambient temperature min.
Operating ambient temperature max.
IEC/EN 61439 design verification
10.2 Strength of materials and parts
10.2.2 Corrosion resistance
  Meets the product standard's requirements. Verification of thermal stability of enclosures
  Meets the product standard's requirements. Verification of resistance of insulating materials to normal heat
  Meets the product standard's requirements. Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
  Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation
  Meets the product standard's requirements.
10.2.5 Lifting
  Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact
  Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions
  Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES
  Meets the product standard's requirements.
10.4 Clearances and creepage distances
  Meets the product standard's requirements.
10.5 Protection against electric shock
  Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components
  Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections
  Is the panel builder's responsibility.
10.8 Connections for external conductors
  Is the panel builder's responsibility.
10.9 Insulation properties
10.9.2 Power-frequency electric strength
  Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage
  Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material
  Is the panel builder's responsibility.
10.10 Temperature rise
  The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating
  Is the panel builder's responsibility.
10.12 Electromagnetic compatibility
  Is the panel builder's responsibility.
10.13 Mechanical function
  The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Technical data ETIM 6.0(Show features)(Hide features)
PLC's (EG000024) / Logic module (EC001417)
Electric engineering, automation, process control engineering / Control / Programmable logic control (SPS) / Logic module ([email protected] [AKE539011])
Supply voltage AC 50 Hz
 V0 - 0
Supply voltage AC 60 Hz
 V0 - 0
Supply voltage DC
 V20.4 - 28.8
Voltage type of supply voltage
Switching current
Number of analogue inputs
Number of analogue outputs
Number of digital inputs
Number of digital outputs
With relay output
Number of HW-interfaces industrial Ethernet
Number of HW-interfaces PROFINET
Number of HW-interfaces RS-232
Number of HW-interfaces RS-422
Number of HW-interfaces RS-485
Number of HW-interfaces serial TTY
Number of HW-interfaces USB
Number of HW-interfaces parallel
Number of HW-interfaces Wireless
Number of HW-interfaces other
With optical interface
Supporting protocol for TCP/IP
Supporting protocol for PROFIBUS
Supporting protocol for CAN
Supporting protocol for INTERBUS
Supporting protocol for ASI
Supporting protocol for KNX
Supporting protocol for MODBUS
Supporting protocol for Data-Highway
Supporting protocol for DeviceNet
Supporting protocol for SUCONET
Supporting protocol for LON
Supporting protocol for PROFINET IO
Supporting protocol for PROFINET CBA
Supporting protocol for SERCOS
Supporting protocol for Foundation Fieldbus
Supporting protocol for EtherNet/IP
Supporting protocol for AS-Interface Safety at Work
Supporting protocol for DeviceNet Safety
Supporting protocol for INTERBUS-Safety
Supporting protocol for PROFIsafe
Supporting protocol for SafetyBUS p
Supporting protocol for other bus systems
Radio standard Bluetooth
Radio standard WLAN 802.11
Radio standard GPRS
Radio standard GSM
Radio standard UMTS
IO link master
With display
Degree of protection (IP)
Basic device
Expansion device
With timer
Rail mounting possible
Wall mounting/direct mounting
Front build in possible
Rack-assembly possible
Suitable for safety functions
Category according to EN 954-1
SIL according to IEC 61508
Performance level acc. to EN ISO 13849-1
Appendant operation agent (Ex ia)
Appendant operation agent (Ex ib)
Explosion safety category for gas
Explosion safety category for dust
Product Standards  IEC/EN see Technical Data; UL 508; CSA C22.2 No. 142-M1987; CSA C22.2 No. 213-M1987; CE marking
UL File No.  E135462
UL Category Control No.  NRAQ, NRAQ7
CSA File No.  012528
CSA Class No.  2252-01 + 2258-02
North America Certification  UL listed, CSA certified
Degree of Protection  IEC: IP20, UL/CSA Type: -
IL05013013Z (AWA2528-1980) DeviceNet connection, CANopen connection for easy

Datasheet - PDF

pdf- Bus module, deviceNet, 24 V DC, addressable 0-63 - EATON - EASY222-DN - 233540English190 Kbytespdf- Bus module, deviceNet, 24 V DC, addressable 0-63 - EATON - EASY222-DN - 233540

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
  Add review