Product name
Eaton Moeller series NZM operating element accessory
Product Length/Depth
145 millimetre
Product height
3 millimetre
Product width
50 millimetre
Product weight
0.176 kilogram
Compliances
IEC
UL/CSA
RoHS conform
Product Sub Type
Operating element accessory
Type
Accessory
Additional plate
Features
For fitting to the mounting bracket when using N conductor or PE conductor terminals K25, K50, K95 or K150
Special features
Additional terminal arrangement for sidewall drive with mounting bracket
For fitting to the mounting bracket when using N conductor or PE conductor terminals K50/1, K95/... or K150/...
Suitable for
Switch disconnector
Power circuit breaker
Used with
NZM1-4
PN1
PN2-4
NZM1
NZM1-NA
NZM2
NZM2-4
NS1
N2
N1-4
N2-4
NZM2-NA
PN1-4
N1
NS2
PN2
Technical Data - Mechanical
Degree of protection / NEMA enclosure type
IP66
Other
Special features
Additional terminal arrangement for sidewall drive with mounting bracket
For fitting to the mounting bracket when using N conductor or PE conductor terminals K50/1, K95/... or K150/...
Design verification as per IEC/EN 61439
10.2.2 Corrosion resistance
Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard's requirements.
10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects
Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation
Meets the product standard's requirements.
10.2.5 Lifting
Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact
Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions
Meets the product standard's requirements.
10.3 Degree of protection of assemblies
Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances
Meets the product standard's requirements.
10.5 Protection against electric shock
Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components
Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections
Is the panel builder's responsibility.
10.8 Connections for external conductors
Is the panel builder's responsibility.
10.9.2 Power-frequency electric strength
Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage
Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material
Is the panel builder's responsibility.
10.10 Temperature rise
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.