PD30CND10NPM5DU CARLO GAVAZZI SYSTEM Diffuse reflective HOUSING rectangular SENSING RANGE 1 ... 5 m CONNECTI..

Photoelectrics
Diffuse-reflective
Type PD30CND10....DU
• Miniature sensor range
• Range: 1 m
• Sensitivity adjustment by Teach-In programming
• Modulated, red light 660 nm
• Supply voltage: 10 to 30 VDC
• Output: 100 mA, NPN or PNP preset
• Make or break switching function programmable
• LED indication for output, stability and power ON
• Protection: reverse polarity, short circuit and transients
• Cable and plug versions
• Excellent EMC performance
• Dust alarm output
Product Description
Ordering KeyPD30CND10PPM5DU
ThePD30CND10sensor familycomesin a compact
10 x 30 x 20 mm reinforced
PMMA/ABS housing.
Thesensorsareusefulin applications wherehigh- accuracy detection as well as small size is required. Compacthousingandhigh powerLED forexcellent performance-size ratio.
Type Selection
The Teach-In function for adjustmentof the sensitivity makes the sensors highly flexible. The output type is preset (NPN or PNP), and the output switching function is oneNOorNCoutputand one dust output NO or NC.
Type
Housing style Housing size Housing material Housing length Detection principle Sensing distance Output type
Output configuration
Connection type
Dust Output
Housing Range ConnectionOrdering no. Ordering no. W x H x D Sn NPNPNP
Make or break switchingMake or break switching
10 x 30 x 20 mm 1 mCablePD 30 CND 10 NPDU PD 30 CND 10 PPDU
10 x 30 x 20 mm 1 mPlug PD 30 CND 10 NPM5DUPD 30 CND 10 PPM5DU
Specifications
Rated operating distance (Sn)Up to 1 m,
referece target Kodak test card R27, white, 90% reflective, 200 x 200 mm
Blind zone 20 mm
Sensitivity Adjustable by Teach-In
Temperature drift ≤ 0.1%/ºC
Hysteresis (H)
(differential travel) ≤ 10%
Rated operational volt. (UB )10 to 30 VDC (ripple included)
Ripple (Urpp ) ≤ 10%
Output current
Continuous (Ie) ≤ 100 mA Short-time (I) ≤ 100 mA
(max. load capacity 100 nF)
Dust output current
Continuous (Ie) ≤ 20 mA Short-time (I) ≤ 20 mA
(max. load capacity 100 nF)
No load supply current (Io)≤ 30 mA @ 24 VDC
Minimum operational current (Im) 0.5 mA
OFF-state current (Ir ) ≤ 100 µA
Voltage drop (Ud ) ≤ 2.4 VDC @ 100 mA
Protection Short-circuit, reverse polarity and transients
Light source GaAlAs, LED, 660 nm Light typeRed, modulated Sensing angle ± 2º
Ambient light10,000 lux
Light spot110 mm @ 1.5 m
Operating frequency1000 Hz
Response time
OFF-ON (tON)≤ 0.5 ms
ON-OFF (tOFF ) ≤ 0.5 ms
Power ON delay (tv) ≤ 300 ms
Output function
NPN and PNPPreset
Output configurationNO or NC Programming options
Output pin 4 black NO or NC Output pin 2 white NO or NC (dust)
Dust alarm output
Delay on operate 20 ms
Indication
Output ON LED, yellow
Signal stability ON and power ON LED, green
Specifications are subject to change without notice (19.08.2010) 1