Smart Dupline® SBWEB BACnetController Type SB2WEB24 • BACnet Controller for HVAC and lighting systems • Ethernet port for BACnet/IP and Modbus/TPC communi- cation • Modbus-RTU master RS485 port for connection of Carlo Gavazzi energy meters • Functions for control of lighting, blinds, temperature, logic, scheduling, sequencing, alarms and data logging • Functions and parameters can be monitored and con- trolled via BACnet/IP objects • BACnet/IP objects are automatically created for all Dupline® and Energy Meter data points • Manages up to 7 Dupline® Master Generators • BTL certified • User-friendly PC-based configuration tool • Dimension: 2-DIN housing • 12 to 28 VDC Power Supply Product Description Ordering Key SB 2 WEB 24 The SB2WEB24 program- mableBACnetController is the brain and central unit inCarloGavazzi’sintegrat- ed concept for HVAC and lighting control in smart buildings.On one hand the SB2WEB24canmanage thecompletelightingcon- trolsystembasedon Dupline® sensors/actuators and DALI actuators,and on the other hand it can oper- ate as Dupline®– BACnet/IP gateway thusallowingDDC controllerstouseDupline® I/O modules and sensors as decentralized I/O via BACnet objects. The SB2WEB is also able to operate as Modbus/ TCP slave. The SB2WEB providesfunctionsforcon- trol of lighting, blinds, tem- perature, logic, scheduling, sequencing, alarms and data logging.Thefunctionscan becontrolled, monitored and operational parameters changed via BACnet objects. The SB2WEB24 can manage datapointsfromupto7 Dupline® networks, each drivenbyaDupline®Mas- ter Channel Generator (SH2MCG24) connectedvia therightsideconnectoror viaanexternal RS485 link. Only Dupline® modules sup- porting the Smart Dupline® protocol can be used. The SB2WEB24 is also equipped with an RS485 port for com- municationwithCG energy meters. All electrical par- ameters from the energy metersaremadeavailable as BACnet objects.Via the PC-based configuration toolthe user defines which modulesareconnectedto the SB2WEB24 and the SH2MCG24s and the unique SIN-address for each Dup- line®module is entered. Sub- sequently the configuration tool will automatically con- figure all connected Dupline® modules via the bus, and create the relevant BACnet objects. Smart Building 2-DIN housing CPU module Power supply Type Selection HousingMounting Supply: 15 to 24 VDC ± 20% 2 DIN DIN-rail SB2WEB24 Supply Specifications Power supply Overvoltage cat. II (IEC 60664-1, par. 18.104.22.168) Rated operational voltage 15 to 24 VDC ± 20% Rated impulse voltage500V (1,2/50µs) (IEC 60664-1, tab. F.1) Rated operational power5 W Protection against reverse polarity Yes Connection A1 (+) and A2 (-) Power off delay1 s Specifications are subject to change without notice (10.02.2015)1
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.