Photoelectrics Through-beam Type PD30CNT15....SA • Miniature sensor range • Range: 15 m • Sensitivity adjustment by potentiometer • Modulated, infraredlight 850 nm • Supply voltage: 10 to 30 VOC • Output: 100 mA, NPN or PNP preset • Make and break switching function • LEO indication for output, stability and power ON • Protection: Short-circuit, reverse polarity and transients • Cable and plug versions • Excellent EMC performance Product Description Ordering KeyPD30CNT15NAM5SA The PD30CNT15 sensor fam- ily comes in a compact 10 x 30 x 20 mm reinforced PMMA/ABS housing. Thesensorsareusefulin applications wherehigh- accuracy detection as well as small size is required. Compacthousingandhigh powerLEDforexcellent performance-size ratio. Thepotentiometer function for adjustment of the sensitiv- ity makes the sensors highly flexible. The output type is preset (NPN or PNP), and the outputswitchingfunctionis NO and NC output. Type Housing style Housing size Housing material Housing length Oetection principle Sensing distance Output type Output configuration Connection type Sensitivity adjustment Type Selection HousingRange Connection Ordering no.Ordering no.Ordering no. W x H x O Sn Emitter NPN PNP Make and break switchingMake and break switching 10 x 30 x 20 mm 15 mCablePO 30 CNT 15PO 30 CNT 15 NASA PO 30 CNT 15 PASA 10 x 30 x 20 mm 15 mPlugPO 30 CNT 15 M5PO 30 CNT 15 NAM5SAPO 30 CNT 15 PAM5SA Note: Emitter, receiver and connector to be ordered separately Specifications Receiver Rated operating distance (Sn) PD30CNT emitter≤ 15 m Adjustment range 3 to 15 m Blind zone PD30CNT emitterNone Sensitivity Electrical adjustment 210° Mechanical adjustment240° Temperature drift≤ 0.2%/ºC Hysteresis (H) 5% to 20% Rated operational volt. (UB ) 10 to 30 VDC (ripple included) Ripple (Urpp ) ≤ 10% Output current Continuous (Ie)≤ 100 mA Short-time (I)≤ 100 mA (max. load capacity 100 nF) No load supply current (Io)≤ 20 mA @ UB max Minimum operational current (Im) ≤ 0.5 mA OFF-state current (Ir )≤ 100 µA Voltage drop (Ud ) ≤ 2 VDC @ Ie max Protection Short-circuit, reverse polarity and transients Ambient light≤ 10,000 lux Operating frequency (f)≤ 500 Hz Response time OFF-ON (tON)≤ 1 ms ON-OFF (tOFF ) ≤ 1 ms Power ON delay (tv) ≤ 200 ms Output function Open collector NPN or PNP by sensor type Output switching functionN.O. and N.C. Indication Output ON LED, yellow Signal stability ON and Power ONLED, green. See curve for condition of stability Specifications are subject to change without notice (18.09.2012) 1
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.