Selected parameters SYSTEM Through-beam HOUSING rectangular SENSING RANGE 6 ... 20 m CONNECTION M8 Plug DC OUTPUT DC NPN MATERIAL Plastic Others SENSING RANGE 15 m HOUSING 30 x 20 x 10,8 mm MATERIAL ABS ADDITIONAL Dust output
Photoelectrics Through-beam Type PD30CNT15....MU/DU • Miniature sensor range • Range: 15 m • Sensitivity adjustment by Teach-In programming • Modulated, Infraredred light 880 nm • Supply voltage: 10 to 30 VDC • Output: 100 mA, NPN or PNP preset • Make and break switching function programmable • LED indication for output, stability and power ON • Protection: reverse polarity, short circuit and transients • Cable and plug versions • Excellent EMC performance • Mute function (Sensor blanking) Emitter • Dust alarm output - Receiver Product Description Ordering Key PD30CNT15NPM5DU The PD30CNT15 sensor fam- ily comes in a compact 10 x 30 x 20 mm reinforced PMMA/ABS housing. Thesensorsareusefulin applications wherehigh- accuracy detection as well as small size is required. Compacthousingandhigh power LED for excellent per- formance-size ratio. The Teach-In function for Type Selection adjustmentof the sensitivity makes the sensors highly flexible. The output type is preset (NPN or PNP), and the output switching function is programmable (NO or NC), and one dust output NO or NC. The mute function can be usedfortestingthesensor for: Malfunctioning, discon- nection, optical axis adjust- ment, dusty and dirty lenses. Type Housing style Housing size Housing material Housing length Detection principle Sensing distance Output type Output configuration Connection type Mute HousingRange ConnectionOrdering no.Ordering no.Ordering no.Ordering no. W x H x DSn NPNNPN PNP PNP Emitter Make or break switching EmitterMake or break switching 10 x 30 x 20 mm 15 mCablePD 30 CNT 15 NMUPD 30 CNT 15 NPDUPD 30 CNT 15 PMU PD 30 CNT 15 PPDU 10 x 30 x 20 mm 15 mPlugPD 30 CNT 15 NM5MU PD 30 CNT 15 NPM5DU PD 30 CNT 15 PM5MUPD 30 CNT 15 PPM5DU Note: Emitter, Receiver and Connector to be ordered seperately. Specifications Emitter Rated operational volt. (UB )10 to 30 VDC Ripple (Urpp ) ≤ 10% Supply current≤ 25 mA Light Source GaAIAs, LED, 880 nm Optical angle± 2º at ½ range Light type Infrared, modulated Light spot 110 mm @ 1.5 m Protection Reverse polarity, transients Indication function Power supply ONLED, green Mute function Emitter off 0 to 3 sec0 to 2.5 VDC (NPN) 5 to 30 VDC (PNP) Emitter half power > 3 sec0 to 2.5 VDC (NPN) 5 to 30 VDC (PNP) Specifications Receiver Rated operating distance (Sn)15 m, with PD30CNT15 Emitter Blind zone None Sensitivity Adjustable by Teach-In Temperature drift ≤ 0.3%/ºC Hysteresis (H) (differential travel) ≤ 10% Rated operational volt. (UB )10 to 30 VDC Ripple (Urpp ) ≤ 10% Adjustable range1.5 m to 15 m resolution 3% on distance Output current Continuous (Ie) ≤ 100 mA Short-time (I) ≤ 100 mA (max. load capacity 100 nF) Dust output current Continuous (Ie) ≤ 20 mA Short-time (I) ≤ 20 mA (max. load capacity 100 nF) No load supply current (Io)≤ 30 mA Minimum operational current (Im) 0.5 mA OFF-state current (Ir ) ≤ 100 µA Specifications are subject to change without notice (09.12.2008) 1
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.