Selected parameters SYSTEM Through-beam HOUSING rectangular SENSING RANGE 30 ... 50 m CONNECTION Terminals OUTPUT Battery Supply MATERIAL Plastic Others SENSING RANGE 30 m HOUSING 180 x 51 x 49 mm MATERIAL PC ADDITIONAL Test input
Photoelectrics Through-beam, Relay Output, Battery Powered Type PD180CBT30Q/MU • Industrial doors and gates • Range 15 m or 30 m • Modulated, infrared light • Supply voltage: 12 to 24 VAC/DC (receiver) • Supply voltage: 2 x 3.6 VDC Lithium batteries (emitter) • SPST relay output • SPST relay low battery • LED for output indication • Protection: reverse polarity, transients • Connection, terminal block • Emitter mute • CE and UL325 approved Product Description Ordering Key PD180CBT30Q/MU The PD180CBT30Q/MU sen- sor is developed specifically for the domesticand indus- trial door market. The sensor meets the regulations for industrial doors inEurope and North America. The robust polycarbonate hous- ing allows flexible installation as the lenses are adjustable bothin horizontal and verti- caldirection.The sensor is easy to use and no sensitivity adjustments are necessary. The aspherical lens design is superiortopreviousdesign of sensors with built-in parabolic reflectors that had corrosion and dust problems. Increased safety by build-in: -Sensor testfunctionthe emitterhasabuilt-in test input designed to mute the emitter and thus evaluate the sensor function. Test function is to be activated by the door controllerorthe doorfunc- tioncanbeactivatedbya limitswitch,magnetsensor or a safety edge profile. The receiver works with a power-supplyfrom 12 to 24 VAC/DC andtheemitteris designedtouse 2 x3.6 V Lithium batteries. Type Housing style Housing size Housing material Battery operated Detection principle Sensing distance Output type Output configuration Mute function Type Selection Housing Range Ordering no. Ordering no. size SnEmitter Receiver 180 x 51 x 49 mm30 mPD180CBT30MU PD180CBT30Q Specifications Emitter Rated operatibg dist (Sn) 15 m with jumper not activated 30 m with jumper activated Rated operational volt. (Ue)2 x 3.6 VDC Lithium batteries Size AA ProtectionReverse polarity, transients Mute input Normal operation> 6 KΩ Mute < 4 KΩ Light sourceLED, 850 nm Battery lifetime Jumper not active 15m => 2.5 years Jumper active 30m => 1.5 years Supply current With Mute active (Io) Typ. 29 µA Light type Infrared, modulated Optical angle ± 5° (using aperture)* * Without aperture the distance is increased by 30 % Specifications are subject to change without notice (21.09.2011) 1
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.