Selected parameters SYSTEM System SENSING FUNCTION Filling or Emptying CONNECTION Terminals OUTPUT Relay SPDT MATERIAL NORYL Others HOUSING 35,5 x 81 x 60 mm SENSING FUNCTION 5 koHm to 150 koHm MATERIAL NORYL
Conductive Sensors 2-point level controller Type CL with potentiometer • Conductive level controller • Sensitivity adjustment from 5 kΩ to 150 kΩ • For filling or emptying applications • Low-voltage AC electrodes • Easy installation with 11 pin circular plug • Rated operational voltage: 24 VDC, 24 VAC, 115 VAC or 230 VAC • Output 1 x 8A/250 VAC SPDT relay • LED indication for: Output ON and Power ON Product Description Ordering Key CLP2EB1B230 µ-Processor based level controller for liquids with a wide sensitivity range (like sewage water, chemicals, salt water etc.). Max./min. control of charging/ discharging. The sensitivity is adjustable by means of the potentiometer. 1 x 8A SPDT relay output. Conductive level Plug mounting No of inputs Charge/discharge Basic with potentiometer 1 relay output Relay SPDT Power supply Type Selection MountingRelayOrdering no. Ordering no.Ordering no. Ordering no. Supply: 24 VDCSupply: 24 VAC Supply: 115 VACSupply: 230 VAC 11-p circular plugSPDTCLP2EB1B724CLP2EB1B024CLP2EB1B115CLP2EB1B230 Specifications Rated operational voltage (UB) Pin 2 & 10 230195 to 265 VAC, 45 to 65 Hz 11598 to 132 VAC, 45 to 65 Hz 02420.4 to 27.6 VAC, 45 to 65 Hz Supply class 2 72420.4 to 27.6 VDC Rated insulation voltage <2.0 kVAC (rms) Rated impulse withstand voltage4 kV (1.2/50 µs) (line/neutral) Rated operational power AC supply 5 VA DC supply 1 W Delay on operate (tV) < 2 s Outputs Rated insulation voltage 250 VAC (rms) (cont./elec.) Relay Rating (AgCdO) µ (micro gap) Resistive loads AC1 8 A / 250 VAC (2500 VA) DC1 1 A / 250 VDC (250 W) or 10 A / 25 VDC (250 W) Small induc. LoadsAC15 0,4 A / 250 VAC DC13 0,4 A / 30 VDC Mechanical life (typical)≥30 x 106 operations @ 18’000 imp/h Electrical life (typical) AC1 > 250’000 operations Level probe supply Max. 5 VAC Level probe current Max. 2 mA Sensitivity5 kΩ to 150 kΩ, CF* = 2.2 nF Dielectric voltage>2.0 KVAC (rms) (contacts / electronics) Rated impulse withstand volt. 4 kV (1.2/50 µS) (contacts / electronics) (IEC 664) Operating frequency (f) Relay output1 Hz Response time OFF-ON (ton)1 s ON-OFF (toff)1 s Environment Overvoltage category III (IEC 60664) Degree of protection IP 20 (IEC 60529, 60947-1) Pollution degree 2 (IEC 60664/60664A, 60947-1) Temperature Operating-20º to +50ºC (-4º to + 122ºF) Storage -40º to +85ºC (-40º to +185ºF) Housing material NORYL PPO, light grey Weight AC supply 180 g DC supply 70 g ApprovalscURus UL508, CSA C22.2 CSA CSA C22.2 CE markingYes *CF = maximum Cable Capacitance Specifications are subject to change without notice (26.08.2014) 1
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.