Selected parameters SYSTEM System HOUSING Rectangular SENSING FUNCTION Filling or Emptying CONNECTION Plug and socket OUTPUT Relay SPDT MATERIAL Plastic Others HOUSING 35,5 x 81 x 63 mm SENSING FUNCTION 250 oHm to 500 koHm MATERIAL NORYL ADDITIONAL Master - Slave
Conductive Sensors 2-point Level Controller, Cascade Coupling Type CL with Potentiometer • Conductive level controller • Adjustment sensitivity – operating resistance from 250Ω to 500 KΩ • For filling or emptying applications • Low-voltage AC electrodes • Easy installation with 11 pin circular plug • Rated operational voltage: 24 VAC/DC, 115 VAC or 230 VAC • Output 8A/250 VAC SPDT relay • LED indication for: Output ON, Power ON • Possibility of serial connection Product Description Ordering Key CLP2FA1BM24 Level controlrelay forcon- ductive liquids which can control two levels of filling or emptying. The relay features a sensitiv- ity range from 250Ω to 500kΩ corresponding to 4m sie- Type Selection mens to 2µ siemens. If more than twolevels are requiredmoresystemscan be added. Type DIN rail mounting Inputs Function Adjustment Outputs Relay versions Power supply Mounting Ordering no. Ordering no. Ordering no. Supply: 24 VAC/DCSupply: 115 VACSupply: 230 VAC 11-p circular plug CLP2FA1BM24 CLP2FA1B115CLP2FA1B230 Specifications Rated operational voltage (UB) Pin 2 & 10 230195 to 265 VAC, 45 to 65 Hz 11598 to 132 VAC, 45 to 65 Hz Supply class 2 2419.2 to 28.8 VAC/DC Rated insulation voltage <2.0 kVAC (rms) Rated impulse withstand voltage4 kV (1.2/50 µs) (line/neutral) Rated operational power AC supply 5 VA AC/DC supply 5 VA / 5 W Delay on operate (tV) < 300 mS Outputs Rated insulation voltage 250 VAC (rms) (cont./elec.) Relay Rating (AgCdO) µ (micro gap) Resistive loads AC1 8 A / 250 VAC (2500 VA) DC1 1 A / 250 VDC (250 W) or 10 A / 25 VDC (250 W) Small induc. LoadsAC15 0,4 A 250 VAC DC13 0,4 A / 30 VDC Mechanical life (typical)≥30 x 106 operations @ 18’000 imp/h Electrical life (typical) AC1 > 250’000 operations Level probe supply Max. 5 VAC Level probe current Max. 2 mA Sensitivity250Ω to 500KΩ Factory settings standard range “S” 100KΩ Ranges L (Low sensitivity)250Ω to 5KΩ, CF* = 4.7 nF Ranges S (Standard sensitivity) 5KΩ to 100KΩ, CF* = 2.2 nF Ranges H (High sensitivity) 50KΩ to 500KΩ, CF* = 1.0 nF Dielectric voltage>2.0 KVAC (rms) (contacts / electronics) Rated impulse withstand volt. 4 kV (1.2/50 µS) (contacts / electronics) (IEC 664) Operating frequency (f) Relay output0.5 HZ Response time OFF-ON (ton)1 s ON-OFF (toff)1 s Environment Overvoltage category III (IEC 60664) Degree of protection IP 20 (IEC 60529, 60947-1) Pollution degree 2 (IEC 60664/60664A, 60947-1) Temperature Operating-20º to +50ºC (-4º to + 122º) Storage -50º to +85ºC (-58º to +185ºF) Housing material Noryl PPO, light grey Weight AC supply 200 g AC/DC supply 125 g Approvals UL cURus UL508 CSACSA-C22.2 No.247 CE markingYes *CF = maximum Cable Capacitance Specifications are subject to change without notice (26.06.2014) 1
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.