Selected parameters SYSTEM System HOUSING Rectangular SENSING FUNCTION Filling or Emptying CONNECTION Plug and socket OUTPUT Relay DPDT MATERIAL Plastic Others HOUSING 35,5 x 81 x 63 mm SENSING FUNCTION 250 oHm to 500 koHm MATERIAL NORYL
Conductive Sensors 2-point level controller Type CL with potentiometer • Conductive level controller • Sensitivity adjustment from 250 Ω to 500 KΩ • For filling or emptying applications • Low-voltage AC electrodes • Easy installation on DIN rails or with 11 pin circular plug • Rated operational voltage: 24 VAC/DC, 115 VAC or 230 VAC • Output 2 x 8A/250 VAC DPDT relay • LED indication for: Output ON and Power ON Product Description Ordering Key CLD2EA1CM24 µ-Processor based level controller for liquids with a wide sensitivity range (like sewage water, chemicals, salt water etc.). Type Selection Max./min. control of charging/ discharging. The sensitivity is adjustable by means of the potentiometerand the rotary switch. 2 x 8A DPDT relay output. Conductive level DIN rail or plug mounting No of inputs Charge/discharge Adjustment potentiometer Output Relay DPDT Power supply MountingRelay Ordering no. Ordering no. Ordering no. Supply: 24 VAC/DCSupply: 115 VACSupply: 230 VAC DIN-railDPDT CLD2EA1CM24CLD2EA1C115 CLD2EA1C230 11-p circular plug CLP2EA1CM24CLP2EA1C115CLP2EA1C230 Specifications Rated operational voltage (UB) Pin 2 & 10 230195 to 265 VAC, 45 to 65 Hz 11598 to 132 VAC, 45 to 65 Hz Supply class 2 2419.2 to 28.8 VAC/DC Rated insulation voltage <2.0 kVAC (rms) Rated impulse withstand voltage4 kV (1.2/50 µs) (line/neutral) Rated operational power AC supply 5 VA AC/DC supply 5 VA / 5 W Delay on operate (tV) < 300 mS Outputs Rated insulation voltage 250 VAC (rms) (cont./elec.) Relay Rating (AgCdO) µ (micro gap) Resistive loads AC1 8 A / 250 VAC (2500 VA) DC1 1 A / 250 VDC (250 W) or 10 A / 25 VDC (250 W) Small induc. LoadsAC15 0,4 A / 250 VAC DC13 0,4 A / 30 VDC Mechanical life (typical)≥30 x 106 operations @ 18’000 imp/h Electrical life (typical) AC1 > 250’000 operations Level probe supply Max. 5 VAC Level probe current Max. 2 mA Sensitivity250Ω to 500KΩ Factory settings standard range “S” 100KΩ Ranges L (Low sensitivity)250 Ω to 5 KΩ, CF* = 4.7 nF Ranges S (Standard sensitivity) 5 KΩ to 100 KΩ, CF* = 2.2 nF Ranges H (High sensitivity) 50 KΩ to 500 KΩ, CF* = 1.0 nF Dielectric voltage>2.0 KVAC (rms) (contacts / electronics) Rated impulse withstand volt. 4 kV (1.2/50 µS) (contacts / electronics) (IEC 664) Operating frequency (f) Relay output0.5 HZ Response time OFF-ON (ton)1 s ON-OFF (toff)1 s Environment Overvoltage category III (IEC 60664) Degree of protection IP 20 (IEC 60529, 60947-1) Pollution degree 2 (IEC 60664/60664A, 60947-1) Temperature Operating-20º to +50ºC (-4º to + 122ºF) Storage -50º to +85ºC (-58º to +185ºF) Housing materialCLP NORYL PPO, light grey CLD ABS VO, light grey Weight AC supply 200 g AC/DC supply 125 g UL Approvals cURus UL508, UL325, CSA-C22.2 No.247 CE markingYes *CF = maximum Cable Capacitance Specifications are subject to change without notice (20.05.2014) 1
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.